PBB8-0147 & ESP32 Arm Mount for LucidVR Gloves
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.19 – €2.68 net (excluding VAT)
For file: CE3_ESP_ArmMount_opti.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.44 excluding VAT (range midpoint).
- Weight reported by the author
- 24 g
- Print time reported by the author
- 2.75 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Everything Else is Child's Play.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 37
- Makes
- 0
- Views
- 629
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Share Alike
A arm mount to hold the cheap PBB8-0147 powerbank found at your local Five Below or on Ebay. Oh, and the ESP32 itself!
Intended for the LucidVR VRGloves to power the unit without adding extra weight on the hand and wrist.
Designed to utilize two velcro straps for mounting, see the 4th image on how to properly loop the straps in so it doubles as padding.
Route the wires through the opening below where the ESP goes, use the hole underneath to get your fingers or a tool in to help route them through.
Once the connectors are in, the ESP will be held in place by gravity. The battery should be a friction slide fit, make sure the USB ports on both the ESP and the battery are facing toward you, otherwise the power cable may get in the way of your tracking solution.
Update 3/21
Added optimized design to use less material (~10g less) and print faster (~15 mins less).