Small Toolbox/Organizer
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.89 – €5.97 net (excluding VAT)
For file: lid_0.4n_0.2mm_PLA_MINIIS_4h8m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.43 excluding VAT (range midpoint).
- Weight reported by the author
- 95 g
- Print time reported by the author
- 4.13 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A customizable toolbox/organizer. Screws/nuts, small tools, crafting supplies, miscellaneous components, first-aid.
- Rating
- 5 / 5
- Likes
- 697
- Downloads
- 1,542
- Makes
- 5
- Views
- 9,419
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A small remixed version of @SaschaUncia's Parts and Crafts Organizer Box that fits on smaller print beds like the Prusa Mini+. My son needed a box to keep his components for Arduino tinkering separated/organized and it seemed like an opportunity for a remix.
I chose to extend the grids up to meet the lid so that only one type of lid (blank) would need to be created. The operation of the lid is not hindered in any way by the extended grids.
Multiple files are included for the different base configurations. I've also included a STEP file with a blank configuration if you want to further customize grid patterns/sizing.
The TPU gasket can be used to help make the contents more water-resistant for any outdoor/rugged uses.
Suggested Print Settings
- PETG or PLA (PETG pictured)
- TPU for the optional gasket
- 0.20mm layer heights
- Infill 50%+
- 3 Perimeter minimum
- Support on build plate only (optional - may benefit the bridge on the base latch area)
- Print the hinge on its side for the best operation and rigidity
Hardware
- (2) M3 x 40 with nuts (lid hinge)
- (1) M3 x 35 with nut (latch hinge)