Search results: bolts

Counting matching models…

PrintablesJankovrto

3d printed bolts for DJI action 3/4/5 case

Just the bolts not the actual box for the camera.

Downloads: 0
Likes: 0
Rating: 0

Order a print of this model

Printables

Clip-On Filament Roller Guide V2 For Ender 3 S1 [Pro/Plus] (M3 Bolts)

This is just a simple remix allowing M3 bolts to be used instead of the M4 bolts.

Order a print of this model

Printables

10" rack rails, handles, sides + bolts and nuts

Printable rack rails and matching 6mm nuts and bolts to mount your (lightweight) equipment in 10" DIY racks There are lots of options for printable rails out there, but I wanted something where I could mount side panels and have…

Order a print of this model

Printables

1"-8 UNC Nut and Hex Bolts, 1" - 6"

This is a 1"-8 UNC hex nut and an assortment of hex bolts in various lengths. These models have actually been printed and tweaked to operate with similar clearances to real metal nuts and bolts I got from McMaster-Carr. Obviously, don't…

Order a print of this model

Printables

DIN 653 Bolts M3 - M10 / Length 5 - 40

DIN 653 Bolts

Order a print of this model

Printables

Door Frame and Bolts with more clearance for easier installation

Door Frame and Bolts with more clearance for easier installation. In door frame i cut the slides a little bit and alt the bolts I made the space in the slides bigger.

Order a print of this model

Printables

Duender MGN9 Front Tension Holder for Long Bolts

This project contains a re-design of the front tensioner housings from Sergei Irbis, and they re-use the stock pulley holder inserts. The main change is that it uses the M5x45 and M5x25 bolts from the Ender 3 (you need to tap your threads…

Order a print of this model

Printables

Thread for Nuts and Bolts

Thread for Nuts and Bolts with 60 segments 1 circle. Diameters 52/60mm, gradient 6mm, gap 0,8/0,6mm. Scalable down to e.g. 10,4/12mm. Available formats: skp, dxf, dwg

Order a print of this model

Printables

Box for bolts and nuts

Order a print of this model

Printables

TPU Washers for Lavatory Faucet Mounting Bolts (SCAD)

These were made for use with lavatory faucets -- primarily bolt-on single handle faucets with integral supply lines. They slip over the supply line and bolt and act as a compliant washer under the clamping plate. The effect is a more…

Order a print of this model

Printables

Modular Hardware Storage Drawers (Nuts, Bolts & Washers) + Label Plates

Files Included Container / module body Sliding drawer Label plate Printing Notes Designed to print support-free in common orientations. Recommended materials: PLA or PETG Suggested settings: 0.20 mm layer height , 3 walls , 10–20% infill…

Order a print of this model

Printables

Quick M2 Bolt Sorter - Organizing Your M2 Bolts Made Easy

You know the feeling. You're disassembling one of your old projects, and you're stuck measuring and sorting your M2 bolts. Well, no more. Using this handy print, you can sort and organize your M2 bolts with ease, helping you get ready for…

Order a print of this model

Printables

T Handle for Bolts

This is a simple T handle for installing on bolt heads. Compression fit to the bolt head. I've included several standard sizes that I've used with bolt heads for bolts I have. However I would recommend using the included a parameterized…

Order a print of this model

Printables

Stake out pole holder 5/16 bolts

Only had 5/16" (~7.75mm) T-bolts on hand, so upped the slot and hole sizes while beefing up the edges around it to make up for the bigger slot/hole to not lose strength. Also rounded some edges, and fixed the pole hole that would cause…

Order a print of this model

Printables

Handle for Hex Bolts M6–M12

🇩🇪 Beschreibung Dieser Griff ist dafür ausgelegt, eine Sechskantschraube direkt im Druck zu integrieren. Vorgehensweise: Im Slicer kurz vor der Deckschicht über dem Schraubenkopf pausieren, Schraube einsetzen und Druck fortsetzen. So wird…

Order a print of this model

Printables

Chair Bolt Retainer v2 (for 5/16-18 bolts with 1/2" head)

Chair Bolt Retainer v2 (for 5/16-18 bolts with 1/2" head) Tired of bolts loosening up and legs becoming loose. If you have similar chairs you know what I mean. I would have safety wired the bolts if the heads were cross drilled. Instead I…

Order a print of this model

Printables

DeWalt Battery Holder for Multiboard T-Bolts

This DeWalt Battery Holder is designed to work with Multiboard and Multiboard 20mm T-Bolts . Print using standard Multiboard printing guidance (3 perimeters, 0.2mm layer height, 15% infill, and no supports). Model should print so the…

Order a print of this model

Printables

M8 Clamping Knob for Hex Bolts – Wabeco Drill Stand / M8 Knauf

M8 Clamping Knob for Hex Bolts – Wabeco Drill Stand / M8 Knauf Printable M8 clamping knob for hex bolts. I use this knob on my Wabeco drill stand, but it can also be useful for other workshop fixtures, jigs, machines or clamping…

Order a print of this model

Printables

Organizer for bolts and nuts

Useful when you're need to put the bolts in piles. Easy to reach cause smooth corner.

Order a print of this model

Printables

Vise soft jaws for screws and bolts

If you've ever tried to hold a bolt with its head in the jaws, you will know the angel-like squealing that can be heard right before the bolt turns sideways and you hit your knuckles onto the vise. Say no to fistbumping your vise and…

Order a print of this model

Printables

Screws and Bolts stroage Ferris Wheel

What U need is One prusa spool or 3d printed spool 6 carts 6 Holders 2 Ferris wheel Sides One Ferris wheel roller Superglue Assembly: Place the roll and center it on the roller then glue one of the sides onto the roller not the spool…

Order a print of this model

Printables

Magnet holder for 6 bolts disc brake

The print needs to be paused to insert the magnets. May not fit your hub/rotor...

Order a print of this model

Printables

Box/shelf with drawers for nuts and bolts

Shelf size: roughly a cube of 15cm There are various drawers, with different subdivisions. If you need to customize it, I can send the Fusion360 source with parametric properties.

Order a print of this model

Printables

JP ModOr inserts for nuts & bolts module 40

Update! 02-12-2023 These inserts now only fit the new versions of de module's drawers. The new drawers are 31mm instead of the orignal 28mm. New drawers still fit the original modules. These inserts fit the JP modulair organizer tower…

Order a print of this model

Printables

Knob for M6 nuts & bolts

Numerous models for knobs are available out there, yet I sought to create one as a simple 3D modeling exercise. Moreover I wanted a knob that could comfortably fit in my hand. This part was printed using Bambu Lab's PLA-CF and…

Order a print of this model

Printables

Marking bolts for your wheel change (Summer/Winter)

I recommend to print the nuts at 101-102% for better fit. I printed my first one at 100% and they were quite hard to turn. The bolts are M14, which fit most European cars.

Order a print of this model

Printables

DIN screws/bolts and nuts

Library to create metric screws according DIN912 (socket head) and DIN933 (full thread hex bolt), nuts according DIN934 (hexagonal nut), DIN439B (hex nut flat) and a sketch for DIN125(washers). I know.. just another library for something…

Order a print of this model

Printables

Small box for bolts

EXPANABLE box for bolts

Order a print of this model

Printables

bolts and nuts container

it is a container to manage bolts and nuts.

Order a print of this model

Printables

bolts and nuts container optimalised

it is a optimalised bolts and nuts container for sorting bolts.

Order a print of this model

Printables

Prusament Spool Hex Insert for M3 Bolts

Simple hex insert, recommend using PETG for best strength characteristics. Recommend utilizing 3-4 perimeters for an effective 100% infill, as well as a brim for better bed adhesion with such a small piece. Recommend printing multiple at…

Order a print of this model

Printables

Metric Bolts and Nuts - working threads with adjusted Fusion Thread settings .xml file

Fed up with having to manually adjust thread faces in Fusion 360 to give a clearance, I worked on creating an adjusted Fusion 360 Thread parameter file. Note even these maximum clearance threads will still require ‘breaking in’ so that…

Order a print of this model

Printables

Taller mounting plate for flat surfaces to accommodate 6mm bolts

100x52×14 mm Print with 15-20% infill 0.2 or 0.3 layer height. 8mm holes for fixing bolts. Or double sided tape or any glue you trust.

Order a print of this model

Printables

Belt Buckle (no glue or bolts version)

THIS IS PUT TOGETHER MOSTLY THE SAME DESPITE THERE BEING DIFFERENCES IN THE MODELS. You can just go straight to the original maker's video and get an idea of how it fits together. Mine doesn't require wrapping the strap around the little…

Order a print of this model

Printables

Clip-On Filament Roller Guide V2 For Ender 3 S1 [Pro/Plus] (M3 Bolts)

This is just a simple remix allowing M3 bolts to be used instead of the M4 bolts.

Order a print of this model

Printables

Organizer nuts Organizer bolts screws box easy printable without support

Easy print without support. Size 170x175x48mm. Holes for axis 2,2mm. For axis use filament (Just cut cca 20cm filament). Small box size 40x40x40mm.

Order a print of this model

Printables

Organizer nuts Organizer bolts screws box easy printable without support

Easy print without support. Size 170x175x48mm. Holes for axis 2,2mm. For axis use filament (Just cut cca 20cm filament). Small box size 40x40x40mm.

Order a print of this model

Printables

Improved bolts for the knife

Improved bolts. Print 2 and push in from opposite sides. Print horizontally with supports. Its ok to set z to a small negative value to get more surface area on the build plate.

Order a print of this model

Printables

Light Duty Hammer (Metal/3D Bolts, TPU Grips)

A printable hammer with TPU grips meant for light duty, not construction sites. I couldn't make a sturdy 3D printed nail puller, so that is omitted from this design. The hammer has a nice weight and is well balanced when the appropriate…

Order a print of this model

Printables

M10x1.5 ISO Metric profile / 10mm nut and bolts

after downloading lots of nuts and bolts in "ISO Metric profile" and not finding any that fits after print I decided to make my own set from scratch and her is the result for 10mm (M10x1.5 ISO Metric profile) / 15mm spanner

Order a print of this model

Printables

M8x1.25 ISO Metric profile / 8mm nut and bolts

after downloading lots of nuts and bolts in "ISO Metric profile" and not finding any that fits after print I decided to make my own set from scratch and her is the result for 8mm (M8x1.25 ISO Metric profile) / 13mm spanner

Order a print of this model

Printables

Bolt Countersink Angle Gauge 88-92 deg for 8mm bolts

Order a print of this model

Printables

Bed Sheet Holder with Variable Bolts

Wanted to use Eilander's fantastic bed sheet holder but with a different bolt setup. Decided to quickly create a Blender scene that lets you specify exactly which type of bolt and nut you'd like to use. Simply select the Bolts and Nuts…

Order a print of this model

Printables

Fanatec Shifter Knob Holder for M6 Bolts

For use with M6 bolts

Order a print of this model

Printables

Roller bearing with M3 bolts as rollers

This is a 3D printable roller bearing. The model is designed so that M3 bolts (with the heads cut off) can be used as rollers. The gap for the rollers is 12mm long, 10-11mm long rollers works best. I would recommend cutting 14mm bolts…

Order a print of this model

Printables

Kingsong 16X Side pads with access holes for bolts (STL+DXF)

Replacement side pads for Kingsong 16X Including holes for the bolts so you won't have to remove the side pads again if you want to open up your 16X. Printing in TPE is okay, but lasercutting a rubber material would be best since the…

Order a print of this model

Printables

Heavy Duty Handle (M10 Bolts)

I wanted a heavy duty handle that I could bolt through a metal enclosure for carrying. Accepts an M10 Hex Head bolt, 75-90cm length will work, depending on thickness of material

Order a print of this model

Printables

Modified 3.5 to 5.25 hard drive tray. Requires M3 Nuts and M3 bolts

The M3 nuts have to be placed inside the slot where they will attack to the hard drive cage with the pointy side of the nut pointing up, not the flat top pointing up. You just take a hammer or something heavy and gently hit it until it…

Order a print of this model

Printables

Flash Bolts

this is a set of Flash Bolts for the sides of a flash mask, and logos Print instructions Unassociated tags: dc comics, the flash Category: Props

Order a print of this model

Printables

Frankenstein's Monster Neck Bolts

Frankenstein's Monster neck bolts for Halloween costume. Bolts and neck band printed separately and connected with M2x8mm screws. Band simply sits around back of neck

Order a print of this model

Printables

Under Desk Drawer Remix from MIHAI_T (Modded to take M4 nuts and bolts)

Original creator is MIHAI_T here in Printables. I only had M4 nuts and bolts lying around so I remixed the files to take M4 instead of M3. Honestly I should've just scaled it, it's a pretty small drawer, but to those who liked the…

Order a print of this model

Printables

LimeSDR-Mini Case w/ Bolts

Same case as before, but uses actual bolts to stay closed now. My old closure system definitely wasn't the best. Uses m2.5 hardware, I used m2.5*16 bolts because they were the best length of what I had available from a cheap set of…

Order a print of this model

Printables

Combination Lock Bolts

Adding a compatible screw and bolt for the padlock. As the rest of the lock is already made out of plastic we might as well make everything out of it, including the bolts. I've successfully printed this to fit the padlock. Printed upright…

Order a print of this model

Printables

Voron frame support for 2020 extrusion with 3mm bolts

Most of the other supports use 5mm bolts and I only had 3mm bolts. Also I'm using the “Hidden cable routing z belt cover” so it needed to fit with those too (visible in the picture). I added 10 of these to my Voron 2.4 350mm, which made…

Order a print of this model

Printables

TicTac Shooter - recessed M3 hex bolts

In order to have the bolts sit flush with the surface of the tictac gun, I added a negative volume for each. To do this yourself, right-click the gun part, add negative volume, select Load, and pick the m3-hexnut.step file. Center it…

Order a print of this model

Printables

SKÅDIS nuts & bolts tray

Small tray to keep small items like nuts and bolts attached to your SKÅDIS peg board

Order a print of this model

Printables

Hold Down Clamp for M5 Bolts

This is a resized hold down clamp scaled to fit for M5 Hex Bolts and a corresponding M5 knob. It is a set of four pieces arranged to to be printed. Print instructions Category: Machine Tools Print Settings Resolution: 0,2 Infill: 20%…

Order a print of this model

Printables

toolbox (Bolts & screws)

Place your screwdrivers, sockets, Nuts, bolts, and screws Etc... In this tool box.

Order a print of this model

Printables

Metric gauge for screws / bolts

⚠ don't change the scale

Order a print of this model

Printables

Nut and Bolts camera mount for 4040 extrusions

A mount that uses threaded nuts and bolt to adjust and lock the camera in place. The bolt also guides the camera cable.

Order a print of this model

Printables

Wall rack for larger Amazon screws/bolts boxes

I started to get too many of the larger Amazon boxes and decided to make a rack (can be wall mounted as well) to hold 8 of the parts boxes (screws/bolts) Not a quick print but for me I hated the boxes just lying around and unorganized.

Order a print of this model

Printables

Dispenser - Holds AA batteries, bolts, and more

Easy to print, no supports required, and very light relative to other storage containers. Has a capacity of around 12 AA batteries, and has a few design features in order to reduce jamming without resorting to an internal “zig-zag”…

Order a print of this model

Printables

Multiboard/Underware Power Strip holder for screw bolts

A recreation from scratch of @Hasanen's Multiboard/Underware Koppla power strip brackets , but instead of using push fit Snaps it uses Big Thread screws. I found that due to the weight of the power strip and attached power bricks and…

Order a print of this model

Printables

Tesla Model Y Front License Plate Mount - M3 Bolts

This is a full M3 nuts & bolts conversion from Poncherelly remix of the Model Y front license plate holder. All assembly hardware are now M3 except for the 4x M5 holes to mount the actual license plate, which should be a self tapping…

Order a print of this model

Printables

Bolts and Nuts Sorter (remix - small edition)

Remix of https://www.thingiverse.com/thing:4759877 , what is a remix of https://www.thingiverse.com/thing:4695864 Just needed the smaller ones, so i edited it. NEW! ---- ---- ---- Made a new version as remix for printing in under 1h:…

Order a print of this model

Printables

Spool Hanger for Closet Wire Rack - No Bolts

This spool holder allows you to hang your filament on a standard wire closet rack that has wires 1 in apart with the wires being approximately 0.1 in thick. There are two models. One that allows you to mount the filament holder…

Order a print of this model

Printables

Dovetail Adapter for L-Bolts

I had a few L-Bolt clamps I wanted to use with my dovetail (MicroJig) sled

Order a print of this model

Printables

Pencil Multitool with metal bolts

A multitool for holding coloured pencils

Order a print of this model

Printables

Collection of metric bolts M6 M8 M10 M12 M14 M16, multiple lengths, reinforced by standard wood or GK screws.

Collection of metric bolts, available in sizes from M6 to M16, with multiple lengths. Reinforced by standard wood screw By curiosity I’ve conducted strength tests to evaluate maximum torque and tensile strength, I've tested M10 bolt. Bolt…

Order a print of this model

Printables

RAK Meshtastic Starter Kit - 2-Part Remix (Bolts & Alt Antenna)

This 2-part low-profile remix fits the RAKwireless WisBlock Meshtastic Starter Kit (US915 Base RAK19007 + Core RAK4631) . It features a simple frame and body, secured with 4 nuts and bolts for added durability. Designed for PLA Flex , the…

Order a print of this model

Printables

No bolts Neck Holder Fimi X8 controller / Colgador mando Fimi X8 sin tornillos

Se trata de un sistema sin tornillos para poder colgarse del cuello el mando del Fimi X8 Print Settings Printer: DIY Rafts: No Supports: No Resolution: 0.2 Infill: 20% Notes: Not necessary supports / No hacen falta soportes para imprimir…

Order a print of this model

Printables

STL Hardware Parts - Nuts, Bolts & Washers

A small selection of the 25k+ nuts , bolts and washers STL Hardware Parts have in their library. They also fit onto standard nuts & bolts perfectly. Recommend printing at 0.12mm. M10 Washer M10 Round Head Cap Bolt - Thread Pitch 1.5mm M10…

Order a print of this model

Printables

Box for Märklin Metallbaukasten Nuts & Bolts

It is slightly wider and much taller than the original Märklin boxes but each of the two compartments holds the same amount of nuts and bolts as one of the original boxes. Printed in PETG 0.15mm structural all supports + MMU3 for the…

Order a print of this model

Printables

STL Hardware Parts - Imperial Nuts Bolts & Washers

Description A small imperial selection of the 25k+ nuts , bolts and washers STL Hardware Parts have in their library. They also fit onto standard nuts & bolts perfectly. Recommend printing at 0.12mm. Brim should be used if you have bed…

Order a print of this model

Printables

Microphone Boom Arm to Monitor Arm (M4 Bolts)

I used 100% infill, but thats probably uncessesary. (It was so strong, it actually bent my boom arms mount)

Order a print of this model

Printables

STL Hardware Parts - Picatinny Rail & M4 Nut Bolts

A requested pack from the STL Hardware Parts Library. M4 nuts and bolts will fit standard variants. They do need to be printed at 100% infill at 0.08mm layers, please check the 3mf file in the parts section for settings. There are 2 bed…

Order a print of this model

Printables

M8 Knob (for Bolts or Nuts)

This is an attractive knob that can be used with M8 Bolts or M8 Nuts. I also included the Fusion-file in case you want to make any changes. Print it upright - no supports needed Also check out my M6-Version of this knob: M6 Knob for Bolts…

Order a print of this model

Printables

M6 Knob (for Bolts or Nuts)

This is an attractive knob that can be used with M6 Bolts or M6 Nuts. I also included the Fusion-file in case you want to make any changes. Print it upright - no supports needed

Order a print of this model

Printables

separate files for Rugged Metric Bolts Box

Separated the files for the Rugged Metric Bolts Box. Instead of having all files loaded into the slicer at once, they can now be loaded individually

Order a print of this model

Printables

1 2 3 Block with threaded holes and connecting bolts

1 2 3 Block. Bolt together using a method I've seen on a youtube video. This is just a bit of fun, they are probably not that useful for anything. Maybe if you don't need super accurate tolerances. That said, they do connect up pretty…

Order a print of this model

Printables

Angle degree torque gauge tool for 1/2 inch spanner extension (to tighten cylinder head stretching bolts)

Angle degree torque gauge for 1/2 inch spanner extension usually used to tighten cylinder head stretching bolts. It's a snug fit onto the ½ extension and the dial is sandwiched between the bottom ring pressed onto the upper hand piece. To…

Order a print of this model

Printables

Nerf AlphaHawk removable bolts and accessory kit

This is a collection of accessories for the Nerf Alphahawk. It started by just making new removable bolts for it, but then I decided to turn it into a long revolver with other mods. You only need plastic screws to fix the bolt and other…

Order a print of this model

Printables

Ellipse baseplate for recessed M3 bolts - Phone holder for pegboard or desktop

This is the ellipse baseplate remixed with recesses for flush M3 bolt attachments to the body of the phone holder. I used 3 perimeters and 15% infill for this model.

Order a print of this model

Printables

Folding Multiconnect Bolts for Multiboard (Small, Mid, Large)

Note that David has already designed folding versions of the new v2 multiboard bolts, which fasten using a coin, here: https://www.printables.com/model/1074671-multiconnect-generic-connector-for-multiboard-v2 Keeping this up for folks who…

Order a print of this model

Printables

Made for 15120 aluminum extrusion. Make t-nuts / t-bolts out of regular 1/4"-20 hardware using this printed adapter v1.0

Printing tips: PLA print as oriented supports: yes (I used normal supports, nothing special, just switched it on) for max strength, consider printing “solid” by raising either the number of perimeter walls or the percent of infill I did a…

Order a print of this model

Printables

Box for Assorted M3 Bolts

Designed to replace a box that was destroyed in shipping so that no matter which way the box is turned or shaken the parts won't escape their respective cells. Should accommodate most standard M3 bolt sizes up to 40mm. Designed to fit the…

Order a print of this model

Printables

Box for Assorted M3 Bolts V2

Designed to replace a box that was destroyed in shipping so that no matter which way the box is turned or shaken the parts won't escape their respective cells. The holes on the top correspond with the length of the threaded component of…

Order a print of this model

Printables

A hand-knob for M6 bolts (10mm hex-head)

The molded on knob for my Halot Mage that holds the print plate in place fell apart after exposure to denatured alcohol for too long (go figure…I thought that they would use something chemical resistant to a common resin cleaning…

Order a print of this model

Printables

Massive Chocofi case with M3 bolts

This is a remix of an excellent model to use M3 nuts and bolts instead of M2 heatset inserts. You will need three M3x10mm bolt. I had one brand of bolts that fit, but another didn't, so I don't guarantee that all M3 bolt heads will fit. I…

Order a print of this model

Printables

Metric bolts and nuts fit steel Metric bolts and nuts (V2)

Bolt thread shrunk 1.5% Nut thread expanded 2.5% Outer hex same size as steel version Fit each other as well as normal metric bolts and nuts. Printed m4 up to M12 at 0.08 layer height. Fit each other as well as the original nut and bolt.…

Order a print of this model

Printables

Nut and Bolts | Quick print for hobbiests

This design is optimized for 8mm diameter bolts, rods, nuts, and wing nuts that work well together (based on my printer settings) without requiring cleanup or modifications. Please note that rendering and compiling longer components can…

Order a print of this model

Printables

Non heat Insert, Just m3 nuts/bolts

uh ok this is the third description printables has asked me to write, so uh heres a copy and paste: I replaced the heat inserts with just regular m3 nuts you hold in a lighter and just press in! man printables remix system is awful lol…

Order a print of this model

Printables

Thunderbolts - Created By...

The Thunderbolts, created by Kurt Busiek and Mark Bagley, first appeared in 1997's Incredible Hulk #447 before getting their own title a few months later. This team of seemingly new super-heroes united to fill the vacuum left by the then…

Order a print of this model

Printables

M5 bolts

M5x 25,30,35,40

Order a print of this model

Printables

ISO 4017 Bolts M1.6 - M10 / Length 2 - 100

Order a print of this model

Printables

ISO 4017 Bolts M12 - M36 / Length 25 - 200

Order a print of this model

Printables

M7 Hex bolts w accessories

Specific Hex bolts for some projects of mine. Prints great upside down on a raft. My settings: .1mm Layers, adaptive on threads. Max 100mm/s 1000mm/s/s for longer version.

Order a print of this model

Printables

Bolt Sizer for Airframe Bolts (AN spec)

Two color gcode file for Prusa mini printed with 0.15, PLA.

Order a print of this model

Printables

Bolts, Screws Tolerance Guage, Measure - M2 to M6.

Hi, Since I often use screws for my personal projects, I often waste time wondering what hole tolerances to use. Often, the screw needs to go through without any problems, but without any play, and sometimes it even needs to be screwed in…