Nuts and Bolts Kids Toy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Nuts and Bolts kids toy that I whipped up with different shaped nuts built using vase mode.
- Rating
- 0 / 5
- Likes
- 36
- Downloads
- 203
- Makes
- 0
- Views
- 691
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
Loosely modeled off of this toy I found on Amazon.
I wanted another reason to experiment with vase mode so I designed all the nuts to be printed in vase mode while still having quite a bit of durability, which is why I designed the ribs. it makes the parts quite a bit stronger paired with the thicker line width.
I used the following settings for the nut pieces:
Spiralize Outer Contour
Nozzle: 0.6mm
Layer Height: 0.4mm
Line Width: 1.2mm
Infill Line Width: 0.8mm
Top/Bottom Line Width: 0.8mm
I used the following settings for the Bolt:
Spiralize Outer Contour
Nozzle: 0.6mm
Layer Height: 0.4mm
Line Width: 0.8mm
Infill Line Width: 0.8mm
Top/Bottom Line Width: 0.8mm