Counting matching models…
Background: I have a multi-panel exercise pen made from heavy wire that looks like this: I wanted a way to secure this pen to a wall, while being quick and easy to remove the pen for cleaning or storage. This model attaches to a wall…
Liked the idea of a magnetic holder for screws, nuts, bolts, and bits, but the initial models I printed were both too small and did not fit well with the contours on the side of my DeWalt DCF845 driver (ToolConnect model). So remixed this…
Hello everyone. This is my first Printables 3D model and its nothing fancy but first thing I designed that I think would be universally useful to other people. I lost that metal fastener which clips the metal prongs that go through the…
Developed by the Aquatic Germplasm and Genetic Resources Center (AGGRC), the Vial Thermocouple Fastener (VTF) is designed to securely fasten thermocouples to Matrix cryovials, enabling precise and consistent temperature monitoring during…
After covering most wall space in my workroom with Artika Sonolok acoustic paneling, I sized this hook model to hang prints using the IKEA VISBÄCK poster hanger. The design sits on top of a wood slat, staying in place through friction…
This is a piece that attaches an indoor dog/cat gate to the wall
Universal 10mm push fastener. Mostly used in fender wells and engine bays to hold plastic molding and panels. Sizeable to your application. I used TPU and Flexible PLA for the bottom and PTEG PRO or PLA + for the top. I prefer the PLA+…
Screw & Nut – 3D Printable Fastener This model represents a simple screw and matching nut designed for 3D printing. It can be used for testing printer accuracy, checking thread tolerances, learning basic mechanical assembly, or as a…
!!!!! fixed leg size Scale 1/18 No fasteners needed, for 2 cars *You could add a led strip to illuminate the car underneath
This is a system I design that keeps the accessibility of a drop ceiling, but with out loosing the height of the room that a drop ceiling would incur. Essentially, it uses brackets on 4 corners of a ceiling tile to keep the tile on the…
These are two piece table buttons that screw to the top and apron, allowing lateral wood movement with rigid attachment. Table top buttons usually have a tab that interfaces with a slot mortise in the apron. These are a lazier equivalent,…
About the model: While making a new wall for a camping shelter, I needed more of these tent toggles. They proved to be hard to find in-store, so I quickly designed these and printed them out. Problem solved. Toggles are designed to fit…
This 40mm (1.57 inch) circular snap fastener takes inspiration from the YKK SNAD fastener. We have a circular couch with plywood base and the cushions are often on the floor. We also have a boat seating area with fiberglass benches. This…
I had an issue that I use BSB extrusion for building my printer with MGN9 rail. That extrusion has grooves that do not allow stable level mounting, so I designed an insert that can hold the rail straight. Step file included. I printed…
These fasteners are suitable for Renault Clio 3 Phase 2 frames (82 00 393 246). They break quite easily, and a plastic frame costs €15-20. Rather than replacing the whole thing, you can now replace just the fragile parts. For a good bond,…
I print the screwdriver with PETG 0.2 mm layer 0.4 mm nozzle
I used a couple of spare M3x10rT screws and M3 square nuts that came with my Core One kit. Print with 3 perimeters and 0.20mm layer height.
This model is a compact snap-fit ball locking mechanism designed for modular 3D printed systems. The design consists of a screw-mount ball base and a flexible conical locking socket that securely grips the ball. The slotted cone structure…
Print two plates and one clip for each fence clip. For my fencing, three of these clips hold one plant fence together very securely. The clip is directional, meaning that it goes on more easily on one end than the other. The plant fence…
Professional redesign of my screw organizer. It features three separate compartments with rounded bottom corners for easy "scooping" of small parts. The lid is reinforced with a structural cross-brace and a "FASTENERS" label. Added…
After covering most wall space in my workroom with Artika Sonolok acoustic paneling, I sized this hook model to hang my CloudX Alpha headphones. The design sits on top of a wood slat, staying in place through friction with adjacent slats…
This model is intended to mount base stations of the Valve Index on walls of a room with Artika Sonolok paneling, without holes or screws in the wall The model is not perfectly symmetrical, to match the hole spacing and size of the Valve…
Does your dog and/or cat tip over their Petmate Replendish Gravity Automatic Pet Waterer/Feeder for no good reason? Well now you can attach it to your wall to prevent spills and property damage! Simply measure the spot to mount, drill in…
Handy attachments for bamboo poles that allow you to easily secure your vegetable/birds garden net and quickly release it if necessary. Two variants, 2 lengths: 1. Attachment with 2 hooks and 2 notches that allow you to tension the net,…
A set of fasteners for installing the FilaPartner E1 dryer on a thermo-box.
Trim Removal Tool - Snap Rivet - Fastener - Retainer NEW VERSION Resize to adjust dimensions - If you download/enjoyed this file, please leave a like - Thx
I ran out of fasteners for my binder and couldn't find any models for it so I made my own.
I do not like to use glue for anything I may need or repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm screws and assorted nuts. Use the original strands and small parts. To unlock the handcuff, insert the…
I do not like to use glue for anything I may need to repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm bolts and assorted nuts. 2026-03-23 edit : my handcuffs collection . Note : you will still need a few…
Heyho I really haven't found a 100% satisfactory solution yet to keep my cordless screwdriver in continuous operation. (Mine doesn't have a factory fitted locking function for this and Velcro wears out quickly) Today I designed this…
The complete set of #Stemfie3D cap nuts. STEMFIE news 👉 X.com/stemfie3d
I recommend to print with PETG or ABS, or other similar flexible material. Infill: 100% Layer high: 0,2 Material :PETG Wall thickness : 3-4 walls
Clip Removal Tool - Snap Rivet - Fastener - Retainer REV.3 Resize to adjust dimensions All our designs are free to download and use—we believe sharing drives innovation. Your support fuels our creativity. If you downloaded and enjoyed…
I needed a Metric Fastener Insert for the Lowboy utility case, this has 3 rows of 8 compartments increasing in size to house M2, M3 and M4 bolts, nuts, washers etc. This is a 2-part design where the shorter insert stacks on top to prevent…
Just a remix, add a pause in your slicer and then drop the magnets in place. They hold the strong magnets just fine for
the two parts have to print separately here is an example how should be the box printed (organic supports on both hinges) this is how should you 3d print the lid
The original Lack enclosure drawers call for M2 nuts and machine screws, but I had a large stash of M3 hardware to use. STLs include the A1, A1-D, and R1 drawers, with their bottom hex nut and screw holes enlarged to accomodate M3…
Fine tuning AXA window faster - striker distance The spacers for the AXA 3320 allow you to fine tune the distance between the window fastener and the striker (sluitkom). Drilling holes for the window fastener may not always be precise…
Cable fasteners for cables in different formats. 1 x 2 x 1.5mm^2 2 x 2 x 1.5mm^2 4 x 2 x 1.5mm^2 2 x 2 x 4mm^2 All fasteners uses 3mm screws with countersunk head. Prints without support.
Hi there! My wife has a gimbal for her studio phone that is always in the way, or missing. The best way to combat missing things that are always in the way, must be to nail it to the wall. That - anyway - was the solution she wanted. Kind…
Summary Dinky little toy blaster. it shoots about 30 feet, is pretty small and is made out of purely printed plastic and two rubber bands (One for the trigger and one for the magazine). It requires no fasteners, or glue, and just uses…
With new printers come new fasteners. Over the years I have had Mk3(S)(+), Mk4(S), Mini(+), and XL-1TH and XL-5TH printers from Prusa, and a growing number of spare parts. I found @SpongyBob_8783 's parts tray super useful, but it was…
The idea for these started out after I printed a different Gridfinity cleco holder yesterday, that's available here on Printables. I thought it was a great model, and well designed, but I also identified several changes I would like to…
I needed a module to generate simple flared pins for fastening things together in prints, removing the need for hardware nuts and bolts. I wanted it to be as short, simple, and easy to use as possible, and to fit in a single module that…
Gridfinity holder for the Arrow Fastener JT27 stapler with room for 1 box of staples. Buy me a coffee
Replacement Trunk Trim Panel Fasteners for the Acura NSX NC1. The OEM fasteners are known to come loose and fall out. This replacement has more thread surface to hold than the OEM. Printed in ABS. Two versions. Version one has a slot like…
Just a simple remix of a place to store some emergency cash, but I made the two parts fit together with a snap mechanism rather than a screw. I found I need to use a brim on the top piece but you might be able to get away without one. No…
Fits a jar with dimensions of 70 mm and height 25 mm.You must use supports when printing this.I recommend printing with petg or abs.
i broke my ptfe adapter cover, the part where ptfe enters started to fall off. so i created a bracket to hold it in one piece
A two piece print which slides together with a tapered dovetail for a snug fit. Just screw the base in place, and slide the hook into the mating dovetail. The taper should allow some forgiveness on print accuracy.
Snap-on fit magnetic bit and fastener holder for the DeWalt DCF850 impact or DCF870 hydraulic drivers. Bits are NOT firmly held, magnets hold the parts in place as you climb ladders etc but leave the bits freely accessible for one-handed…
This is still a work in progress. I'm changing things as I refine the model. Parametric model to generate labels for all screw types I could devise. Mix and match: Head types: Socket, button, flat. Head keys: Hex, slot, phillips, torx,…
Print out of 98a tpu 60% infill. Mirror for other side I used these for fasteners. You will need two https://www.amazon.ca/dp/B09LYX22WF?ref=ppx_yo2ov_dt_b_fed_asin_title
Corner bracket to replace the standard component from Tukkari in the front left top corner. Elements of the articulated arm can be mounted to the bracket to provide a top down view onto the print bed with the ESP32 camera. The bracket can…
This is a fastener for securing lightweight items to the T-slots found on the Taz 5 and other printers. It does not require access to the ends of the rails. As the mounting screw is driven in to the fastener the tabs are forced outward to…
I printed in PETG. PETG is flexible enough not to break when the cable tie is bent. For better results it's advisable to bend the cable tie when it is warm, for example directly after the print. Later you can heating it up with a…
An microphone boom arm fastening part using OpenBeam for clamping.
Main aim Cheap and simple replacement of the original fastener. That is buyable on https://www.ites.cz/eshop/dily-drahy/spony-autodrahy-24-ks.html Print settings PLA OR PET-G 100% infill 0.15 layer Notes Prepared 3mf file for Prusa Mini…
Ender 3 S1 Y stepper motor mount upgrade. Ender 3 S1 Y stepper motor mount upgrade with two-axis fasteners . Stiffer mounting, less vibration and noise. Vibrations on the Y-axis are about 20% less, comparing the amplitude of the vibration…
This case will hold your ESP32 Cam and make sure its ventilated. There is a ventilation hole in the front, and the back is open to let the heat escape. You can also take advantage of the open back to attach a heatsink. This case does not…
Motivation I wanted to use my backpack as a pannier on my bike rear rack and found a few solutions online that involve drilling through the backpack strap or bolting some clamps to the straps. I wanted something that wouldn't require…
My birds chewed through a couple of their rope perches right where it connects to the end cap. Rather than throwing it out and buying a new perch, I designed this for an easy fix. Position the two inner pieces around the rope like a…
In the original model, if I squeezed the handle too hard I could pinch the blade which prevented it from moving. I added a back to prevent that. Make sure your flow is spot on or you'll have to sand the handles to get the blade to not…
I remixed Comrade_Zach's model to make it more sturdy and allow for it to be securely fastened to walls, cabinets, or whatever your heart desires. I personally used one to help secure two stackable cabinets and add a second spot to hang a…
A very simple design as I'm still trying to learn Onshape. This is V2.
Ich drucke dieses Modell mit einem Elegoo Neptune 4 und nutze Cura als slicer. Ich würde Fuzzy Skin und Supports empfehlen. I'm printing this model with an Elegoo Neptune 4 and using Cura as a slicer. I would recommend Fuzzy Skin and…
I've wanted to make an airbrush booth from some foam boards to complete a few projects. I've tried a few corner connectors, but wasn't content with the results. I designed these to fit tightly without falling apart or leaving large gaps.…
I printed it with 0.2 layer height 0.4 nozzle 5 walls 100% infill tree support . Happy printing.
Plastic Slider Tri Glide Adjust Buckles Size inside holes size for 30mm strap (you can resize to any size)
The original model failed on me when I hung a heavy coat on it. The part that failed was the chamfer on the mount which is relatively small in the original model. I used a larger chamfer to increase the strength and it has not failed me…
Thread protectors for fasteners. Printing Use TPU with a generous outer brim.
Thread protectors for fasteners. Printing Use TPU with a generous outer brim.
Easy attachment to vertical surfaces with screws. Suitable for any flat objects such as phone tablet and others.
Both parts contain a hidden 10mm diameter pocket (0.2mm clearance all around) designed to fit a 10mm diameter / 5mm thickness neodymium magnet. The g-code contains a pause at 6mm height, i.e. just before the pockets gets printed over, to…
Update 2025-0319 Added Shelf and Drawer Gridfinity options as well as 21mm Gridfinity vase mode bin. Update 2025-0311 I finally tried printing this in PLA with a 0.4mm nozzle and NOTHING fit ! ouch. with the 1mm nozzle and petg its a…
This is version 2 of my custom electrical wire fastener/clip. I've added a countersink to support an additional type of screw while leaving a large flat area for the ¾" #8 lath screws I'm using. The large flat head screws are ideal for…
Background: I have a multi-panel exercise pen made from heavy wire that looks like this: I wanted a way to secure this pen to a wall, while being quick and easy to remove the pen for cleaning or storage. This model attaches to a wall…
A custom 5-hole fastener that I made to mount my borders to my honeycomb storage wall. Uses the same countersunk hole as the original fasteners, just 5 hexes instead of just 4.
This M Clip is engineered for durability and reliable performance in demanding professional environments. Unlike flimsy alternatives, this design provides a secure grip for fastening various types of garments and textiles. The M-shape…
I made this for fastening 3mm thick polycarbonate panels to my hypercube evolution's 3030 extrusion to enclose it. I created holes in the panels with a 9/32" bit and obrounded them until the fasteners would just barely press through. That…
The Straw Thermocouple Fastener (STF) was developed to secure thermocouples inside 0.25- and 0.5-mL French straws for precise temperature monitoring. The STF can be printed using both FFF or SLA, but has proven to be significantly more…
The Vial Thermocouple Fastener (VTF) was developed to secure thermocouple inside cryovials for precise temperature monitoring. The VTF accommodates Corning® 2 mL Cryovials (Item # 431386) and Matrix™ 500 µL ScrewTop Tubes, but may also…
Simplified version of the original to allow for support free printing in any orientation.
I wanted to be able to mount the pill pods dispenser sideways on my multiboard, so I created this remix. I also include a model with holes to mount with screws. I also included a blank one for anyone else if they want to customize for…
Lock or fastener for QG10-15 steel plate. This fasteners are used for my zero point angle: https://www.printables.com/model/1269960-zero-point-angle-for-a-qg10-15-steel-plate-rectang Be aware there are two different headers. The small one…
Home with my son who has COVID and he needed some brass fasteners to make a model of the sun / moon / earth where they could revolve appropriately. Didn't have brass fasteners and couldn't leave the house, so I found luquad525's “Locking…
I found this device on AliExpress and it was labeled as a solder fume extractor. A real fume extractor should probably have an activated carbon filter though. I later discovered this device is actually meant for nail salons to collect…
Version of the initial link prepared to be fastened with a clipped fastener to maintain the height of the original, the tool for the fastener and the links for the chain are in their original posts
Some easy to use film reel fasteners made for the MovieStuff RetroScan Mark I/II film scanners. You may want to use a left and right threaded 5/16"-18 tap to cut the threads as they tend to be a bit tight otherwise. I usually print left…
It should be fairly strong, been using it for a while. Print the hook sideways, like a letter J viewed from above. Excuse the terrible needlework lol.
A simple locking mechanism I made for the louver/jalussi accessory to Volvo 740.
Cheek Protection fasteners for mask Dye 0.08 mm fill 100%
3D printed fastener so no fender washers, book binding posts or nuts and bolts are needed to attach the spice holder to the slider.
Some LED collars have ridiculously flimsy locks, which break after a month or two. It's a shame when a fine rechargable collar becomes unusable because of such a small detail. This is an ad-hoc solution based on the original design. The…
