Locking rivet, fastener
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is a working locking rivet (fastener) for Crocs' strap or binding cardboard, etc.
- Rating
- 4.833 / 5
- Likes
- 154
- Downloads
- 1,188
- Makes
- 11
- Views
- 3,909
- Reviews
- 12
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I could not find an acceptable 3D printable rivet, fastener for my Crocs' strap so I decided to make my own.
Printed in PETG with 0.10mm layer height, no support. Please enable sequential printing at Print settings - Output options - Complete individual objects if you plan to print more than one at the same time. You need a pair to make it work ;-).
A pair of these fasteners is printed in under 15 minutes.
Attached STL model parameters:
- Total height: 10mm
- Pin height: 8.8mm
- Pin diameter: 5.5mm
- Base diameter: 14mm
These parameters and a few others can be easily adjusted in the source OpenSCAD file.
I hope you'll find it useful!