1 / 2
Fastener - suitable for IKEA Samla box 45 liter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For my filament box I have designed a fastener with toggle joint to ensure an air tight box.
- Rating
- 4.5 / 5
- Likes
- 25
- Downloads
- 103
- Makes
- 2
- Views
- 660
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
The fastener is suitable for an IKEA Samla box with 45 liter and can be used with or without a sealing.
If used for a filament box:
For the sealing I recommend to use a foam rubber which is bonded to the box. The thickness of the pressed foam rubber should be about 0,5 up to 1mm.
On my filament box Im using 18 fastener. 4 on the short side and 5 on the long side. The used foam rubber have an unstressed thickness of 2,5mm.
Print instruction:
- Fastener is not a print in place part
- Printed without supports
- Material: PETG or similar
Assembly instruction:
- Assemble the parts as shown on the picture
- The connection of the plate and the pins is designed as a press fit, but can be assembled by hand. If not, use a vice or a gripper to connnect the parts.