ESP32 Cam Case - No Fasteners Needed - Fully 3D Printed
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D printed ESP32 Cam Case with no fasteners needed.
- Rating
- 0 / 5
- Likes
- 135
- Downloads
- 373
- Makes
- 0
- Views
- 3,101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
This case will hold your ESP32 Cam and make sure its ventilated. There is a ventilation hole in the front, and the back is open to let the heat escape. You can also take advantage of the open back to attach a heatsink.
This case does not require any fasteners to put together. You can put it together and use it immediately after printing.
I designed this case for printers with a 0.40 nozzle and 0.20 layer height, so use those parameters if possible to get the best tolerances. This model does not need supports, but there is a small bridge that your printer will have to make for the micro USB slot.
In addition to STL files, I will include the Fusion file as well as STEP files for the model so that anyone can customize the model or make any changes. The model I am providing does not have any mounting bracket, so you would have to edit the Fusion or Step file and add your own if needed.