ESP32 Cam Case - No Fasteners Needed - Fully 3D Printed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D printed ESP32 Cam Case with no fasteners needed.
- Ocena
- 0 / 5
- Polubienia
- 135
- Pobrania
- 373
- Wydruki
- 0
- Wyświetlenia
- 3101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This case will hold your ESP32 Cam and make sure its ventilated. There is a ventilation hole in the front, and the back is open to let the heat escape. You can also take advantage of the open back to attach a heatsink.
This case does not require any fasteners to put together. You can put it together and use it immediately after printing.
I designed this case for printers with a 0.40 nozzle and 0.20 layer height, so use those parameters if possible to get the best tolerances. This model does not need supports, but there is a small bridge that your printer will have to make for the micro USB slot.
In addition to STL files, I will include the Fusion file as well as STEP files for the model so that anyone can customize the model or make any changes. The model I am providing does not have any mounting bracket, so you would have to edit the Fusion or Step file and add your own if needed.