1 / 4
Fanatec ClubSport DD/DD+ Mount - Series 15 & 40 Extrusion M8 Bolts — image 1
1 / 4

Fanatec ClubSport DD/DD+ Mount - Series 15 & 40 Extrusion M8 Bolts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mounting solution for the Fanatec ClubSport DD/DD+ power brick, Series 15 & 40 aluminum extrusion with M8 bolts and…

Rating
5 / 5
Likes
61
Downloads
447
Makes
5
Views
1,822
Reviews
3

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Mounting solution for the Fanatec ClubSport DD/DD+ power brick, Series 15 & 40 aluminum extrusion with M8 bolts and t-nuts. Print two mounts

The Series 15 that I modeled the mounting to is from tnutz.com and has a 38.10mm spacing from the center points of the slots. However, I tested it on Sim Labs Series 40 Extrusion and it worked just fine.

https://www.tnutz.com/product/ex-1530-black-2/

https://www.tnutz.com/product/ex-1545-black/

This mount allows 1mm of clearance from top to bottom for the power brick. The clearance works perfectly fine, but I added a thin strip of the soft side of velcro to give it a cushioned press fit under the Fanatec Logo.

*There is no need to use supports, simply print with the Fanatec Logo on its side.

Print Settings

Rafts:

No

Supports: 

No

Resolution:

.20mm

Infill: 

30

Filament: Inland PLA+ Black Post-Printing =============

Optional: Add a thin strip of the soft side of velcro to give it a cushioned press fit under the Fanatec Logo and possibly the sides.

 

 

Category: Video Games

Tags