Makita 18v adapter - remix for 3mm bolts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
18v Makita Battery adapter remix with 3mm mounting holes.
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 343
- Makes
- 2
- Views
- 2,540
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of fablab.ee's Makita 18V battery adapter with mounting holes for m3 bolts in a slightly different location to better suit my requirements with a 52x58 mm pattern.
The holes are also countersunk further so the same length bolts can be used in all 4 holes.
I have also modified the retainer plate to indicate contact polarity and allow access to the status pin if you wish to include circuitry to monitor LXT battery state. I do not do this, but there is an over-discharge prevention circuit on Instructables : https://www.instructables.com/Making-a-Over-Discharge-Protection-for-Makita-Batt
As with the original design, this adapter fits Makita 643852-2 Battery terminals. These are available from many sources, including Amazon and eBay.
There are overhangs, but I was able to print without supports. There are a few hanging filament strands, but not enough to impact functionality.