Counting matching models…
Mount 3 Ryobi 18v batteries to wall control pegboard using the DDD Printable Wall Control System . Note: If you use the center piece to combine two of these together, the middle batteries will be rubbing together a bit. They fit, but it…
Dewalt 18V Battery to Dewalt 12V (NiMH) Skin ** you will be over volting your tool ** Extra requirements 2 x 6mm male spade connectors 2 x 6mm long male spade connectors 4 x M3 nuts 4 x M3 10mm socket head bolts 2 x wires 40mm long, 5mm…
Materiál: PLA Výška vrstvy: 0,2 mm Orientace: libovolná Podpora: žádná Výplň: 15 % trojůhelník
I hate the idea of having different batteries for different tools or being locked into a tool brand because you've accumulated their batteries. Ryobi have some great 36V gear (40V in the USA) and I wanted to use my existing Ozito/Einhell…
Gedruckt mit PLA Für Makita Akku Adapter: Makita Battery Mount by GPlatek on Thingiverse: https://www.thingiverse.com/thing:352094 AkkuTerminal: https://www.ebay.de/itm/386728240720 Module: Voltmeter: https://www.ebay.de/itm/135144196030…
Gedruckt in PLA Für Makita Akku Adapter: Makita Battery Mount by GPlatek on Thingiverse: https://www.thingiverse.com/thing:352094 AkkuTerminal: https://www.ebay.de/itm/386728240720 Module: Voltmeter: https://www.ebay.de/itm/135144196030…
Mesh model of my Bosch GSR 12V-15 cordless drill for use in modelling. Scanned with a Creality Scan Otter.
Printing Parameters: Material: TPU Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no Surface: fuzzy
Summary for einhell 18v nickel cadmium , yellow and grey models base for Einhell Power x batteries or base for parkside x20 batteries Print Settings Printer brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: .2 Infill: 30…
Witam! Prezentuję uchwyt na baterię 18V marki Festool z kanałem powietrznym AIRSTREAM. Pozdrawiam!
This battery adapter lets you make a powerful worklight with your Metabo 18V tool batteries. You need: Suitable LED Light Small spring, ca. 5mm diameter, 10-15mm length. 5x M3x16mm screws for Case 1x M3x25mm screw for Lever Toggle switch…
Bosch GKF 18V-8 baseplate with small center hole. Stops the router from tilting when chamfering small corners.
Last update of this page was: 2026 04-07 These are the STL files for various 18v and 40v Ryobi battery interfaces. Other models I have listed on Printables may require one or more of these parts. Minimum of 14AWG wire is required for all…
This is the same holder as the original but with a multiconnect connector spaced to fit the opengrid system. I printed this in PLA with 0.2 layer height, 0.4 nozzle and organic supports on build plate just in case. Fits snuggly but not…
This model uses the popular 30 mm diameter USB car charging socket to provide USB power from both Ryobi 18 volt and 40 volt batteries. The charging socket I used was the only one I found that had the input voltage range for both the 18…
Makita DML800 18V LXT Lithium-Ion Cordless LED Headlamp hanger, wall mounted holder, labelled with DML800. Two versions, horizontal and vertical. Attach with two number six screws. Print as pictured. No supports needed. Battery Holder…
Inlay for a standard Bosch L-Boxx to hold multiple 18V batteries + two GAL 18V-160 charger. The design is modular, so you can adjust it to the batterie sizes. The two vertical batterie places can only hold up to a ProCore 5.5ah, anything…
Use this model at your own risk! This model is a DIY adapter for power tools and creates risk of electrical shock or fire if misused. Although this is a simple adapter, basic knowledge of electrical work is highly recommended to proceed…
For some reason the excellent model by @m98custom1212 (thanks for sharing it) came out a bit loose so I decided rather than experiment with scaling the print, I made a couple mods to the step file. You can see these on the picture below.…
bosch GAL 18V-40 charger mount adapter for qbrick prime toolbox I use https://www.thingiverse.com/thing:6102493
I really liked @kerngebiet's Top-Down Holder for Makita 18V Power-Tools but I'm clumsy and was worried I might knock the battery or tool off at some point. My remix adds fins to keep the battery from sliding sideways on the holder. It…
Ryobi 18V ONE+ Power Sprayer Wall Mount (P2800) This wall mount is designed specifically for the Ryobi 18V ONE+ Power Sprayer , providing a clean, secure way to store your cleaning sprayer when not in use. Perfect for garages, utility…
English Description This model set includes IKEA SKÅDIS–compatible holders for Bosch Professional GSR 12V Screw driver and its accessories , mounted using the Low Profile T-Clip from @tchoupshop_82950 . The models are designed to: provide…
Würth ALG 18V Holder Introducing the Würth ALG 18V Holder, featuring our new and improved twisting fasteners for effortless installation on the Würth Perforated Plate System . This holder is designed to provide secure and organized…
I lost my nozzle this is a replacement similar to the original. Nothing fancy but seems to do the job
Info: Needed a solution to ensure the holes for installing a floating shelf would end up perpendicular to the Wall Surface and a Tool mounted Spirit Level seemed like a good solution so a 3D Scan and some CAD Modelling later we have…
Male to male and female to female adaptors for bosch GAS18V-02N vacuum
Its an emergency radio with several functions: powered by Bosch 18V professional battery or an external power supply. FM-Tuner with bluetooth function. Remote controller included. DC Output to connect devices to the battery (e.g.…
This is an extremely niche project, but it lets you use a Ryobi battery to power a Skil Tower Light . Lowes was selling these lights for $50 each so I got two. One was left unmodified and the other was modified to use Ryobi batteries…
This is an attachment that allows you to use the Dyson combination tool with the Rigid 18v hand vacuum.I know this is a very specific tool, but I always try to share things I make because you never know if someone else has the same…
For me the starter kit charger is all I need, but I wanted to have a fixed place for it. Works good enough for me. Feel free to modify it as needed. The source is on Onshape I don't know what the model is called, it is sometimes…
I found the Bosch 18V Grinder Wall-Mount here, and wanted to see, if this would also be an option for my Kuepper PEG Board. Therefore I merged the Mounting-Points from the GSR12V Drill Holder to this model.
Battery holder for MacAllister MBAT18-Li. Older type then Solo. Must print like in picture.
This utilises M3 screws and M3 nut inserts to secure to your honeycomb storage wall (HSW, because I'm lazy). I used M3x10 screws. You will need two M3 nut inserts per battery. I use a dab of B-7000 (phone adhesive) to secure the nuts to…
This is a backplate that uses M3 screws to attach to your HSW, as well as to your Einhell charger. So, for attaching the plate to your charger, you will need 3 M3 nuts 3 M3x10 screws To attach the plate to your HSW, you will need 3-4 M3…
Description Battery Holder – Makita 18V Practical and compact holder for two Makita 18V batteries. Ideal for workshops, garages, or mobile setups, helping you keep your batteries neatly organized and safely stored. Designed for easy…
Battery Holder – Parkside 20V & DeWalt 18V Practical and compact holder for two batteries, compatible with Parkside 20V and DeWalt 18V batteries. Perfect for workshops, garages, or on-the-go use, keeping your batteries organized and…
This is a Remix of an original Model by Wiseone. For a detailed description please see the original Model. The only change to the original model is an added cutout to be compatible with the Makita 644808-8 spare part as contacts instead…
Eine einfache Wandhalterung passend für den Bosch GSR 18V-21 Professional. Gedruckt in PETG Galaxy Black ______________________________________ A simple wall mount suitable for the Bosch GSR 18V-21 Professional. Printed in PETG Galaxy Black
This is an adapter to allow me to use a Porter Cable 20v Li-Ion battery in my old Craftsman 18V NiCad drill. I am too cheap to throw away the old Craftsman drill even though the batteries no longer work and they would be too expensive to…
You will need 2x M3 nuts 2x M3x10 screws. Print as oriented in the files, and print two M3 nut inserts for HSW. You then... attach it... to the wall... the honeycomb wall.... img below? may help.;.
Flat Nozzle attachment for M18 Precision Blower tool. For M18v 0887-20. Snaps into place like nozzles provided. Supports necessary for the “lock” into place. Printed in PLA, 40% infill for strength, .20 LH. 2 walls. Print vertical with…
Created this so that tools that have belt clips or the tools that have other reasons why they can't be pushed up against the wall can still be mounted. Honestly, I didn't do the best job on this, you need longer screws. If I took the time…
An adapter for the Bosch Professional GBL 18V 9.5mm x 160mm Use TPU
Das Modell von https://www.printables.com/model/929117-ryobi-router-vacuum-adapter-for-nilfisk-multi-ii-3/files hat mich inspiriert, dieses Konzept auch für die DeWalt DCW604 umzusetzen. Verwendete Hardware 2× Metallstangen Ø 7 mm, ca.…
Description This is a fully 3D printable handheld vacuum cleaner , designed as a compact and modular DIY solution. The design integrates a 50 mm brushless motor , filter system, and a detachable dust collector, all housed in a clean,…
Quick Mount for a Makita Jigsaw Modelled way back when in 2022 and never uploaded, oops. On the plus side, it definitely works as its been hanging on my wall since then. Tested on the DJV182Z but I can't see why it wont be compatible with…
Based on a cordless soldering iron I purchased from Amazon ( https://www.amazon.co.uk/dp/B0DBQB13KP ), which uses Bosch 18V batteries for convenience, this holder for the IKEA Skadis pegboard, with a 3mm thickness, compliments my modified…
Simply print the 3mm version if you use a 3mm thick pegboard. Print Time : 00hr 57m Filament Use : 22g
Einbauplatte um die Einhell Akku-Kantenfräse als Tischfräse zu verwenden. Für die Reduzierringe gibt es noch eine Aufbewahrung. Es werden insgesamt 28 Magneten Durchmesser 5mm mit 2mm Dicke benötigt. Die Vertiefung in der Platte muss 8mm…
This is a Multiboard mount for BOSCH GAL18V-40 Battery charger. You can also mount it on bare wall using M4 Flat Head screws. To mount this bracket on the Multiboard You will need 2 Multiboard M4 Heat Set Insert Weight Bearing SNAPS or…
Description Ryobi 18V battery mount compatible with the DDD Printable Wall Control System ( https://www.printables.com/model/52618-ddd-printable-wall-control-system Additional parts needed: A left and right 2x0 DDD Flat for mounting.…
Replacement pipe for Bosch Professional GAS 18V-10L. The original pipes are horrible, made out of the cheapest plastic that snaps when you squeeze them with your hand. The replacements fit perfectly, but original floor vacuuming…
To ensure maximum strength and a long lifespan, I recommend the following print settings: Material: PETG, ASA, or ABS are highly recommended for their mechanical strength and temperature resistance (especially if your garage gets hot…
This 3D model is a wall mount designed specifically for Einhell 18V batteries. It features an open design without any locking mechanism, allowing for quick and easy battery removal. The mount supports both vertical and horizontal…
I did not have the proper spring handy, so designed my own. All kudos to Ayu for the original model! You will need less than 3 g of PETG
This is a heavy-duty mount for the Ryobi pole saw head. Storing these can be a pain because they're top-heavy: Locking Version: This one has a specific "lock-in" tab at the bottom to prevent the mount from flipping up or shifting when…
Most Ryobi battery holders I’ve seen hang the battery by the stem, which always seemed problematic to me. I designed this to hold up to three 18V ONE+ batteries by the body instead, giving them much better support. Fitment Note: This…
Nothing special here, a simple wall mountable battery holder for Ryobi 4ah and 5ah batteries, presenting the display to the top for easy viewability. The model is deliberately loose and thick walled to ensure it lasts more than 5 mins in…
Updated 04/22/2025 Easily carry two 18v batteries, prevent rowdy batteries from tumbling about in your tool bag, option for electrical connections. Prevent rowdy batteries tumbling about in your tool bag! Suggested print settings: -…
Makita 18V 4 place battery holder. Includes files for 4, 3, 2 and 1 battery holders. 4 place holder is 311mm x 23mm overall. No supports needed. Print on edge as pictured. Edit: Added versions with holes 40mm apart and labels. Tool holder…
Simple tool holder for Makita 18V flashlight, should work for other LXT tools also. No supports needed. Print on edge as pictured. Edit: Original for flashlight will work on other tools but the Easy Print Mount bumps against the inset…
My design for a screw on wall mount for my Bosch Professional GKS 18V-57 saw. No Support is needed, this is why it comes in three parts. The table it self to put the saw on and the mounting bracket (you need two of them). After printing…
I do have quite a few Ryobi 18V tools and batteries. Unfortunately, some batteries cases got damaged over time, while batteries work just fine. I was not able to find a top cover model on thingverse/printables so modelled it by my own.…
Updated 04/07/2026 v2.3 has a notch and tabs that help with bed adhesion so the corners do not lift, these should be cut away with a knife after printing. Allows for the use of two or four Ryobi 18v batteries to power fans, speakers,…
My first model I made! Fits the battery like butter.
Body split in two parts Added a cutout for a standard Bosch jigsaw blade case, which fits loosely but is still kept in place. This is an old model that I haven't revisited after gaining experience in Fusion, so some choices are possibly…
A sturdy tool holder for quick access to your Makita 6-1/2 in. cordless circular saw. Fit is snug, however, the blade DOES NOT need to be removed (blade guard retracted). Can be wall mounted directly with 4 flathead screws. I chose to…
An adapter to use you Makita 18V batteries as a powerbank to charge any USB device. Usage So far I used the charger on holiday and on a boat trip. It kept my tablet and phone fully charged for at least 48 hours of continuous use.…
Mount 3 Ryobi 18v batteries to wall control pegboard using the DDD Printable Wall Control System . Note: If you use the center piece to combine two of these together, the middle batteries will be rubbing together a bit. They fit, but it…
Print this bottom to allow integration of a kobalt 24V battery to the 18V ryobi tool. Use the top part from the linked model for the RYOBI half. For terminals on the kobalt half Use spade terminals or appropriate ring terminals and…
Introduction The goal is to create a portable soldering solution which can be powered from a Makita 18v battery. This design uses a Quicko T12 STC Mini controller which is available for under AU$25 on Aliexpress. Battery Capacity & Safety…
I made a battery holder for Makita 18v batteries. The peg for the honeycomb storage wall is printed separate and then inserted from the front of the battery holder to make printing less cumbersome. This is the unbranded version. I have…
Use an einhell 18v battery for your blaster, all you need are 2 15 by 30mm sheets of metal to fit securely on the contacts, brass is better because it is easy to solder on, but anything conductive should work, fit them on the center…
Ryobi link 18V tool holder with reversible mount
Changing the genuine adapter of the saw with a new one that fits a Parkside vacuum cleaner hose (35 mm)
to mount a Makita 18V tool at a french cleat wall
Dewalt 18V Battery to Dewalt 12V (NiMH) Skin ** you will be over volting your tool ** Extra requirements 2 x 6mm male spade connectors 2 x 6mm long male spade connectors 4 x M3 nuts 4 x M3 10mm socket head bolts 2 x wires 40mm long, 5mm…
Attaches to the belt clip mount using a 4mm screw. very handy when you need two types of tool bits on the same project
just a nice tray for the BOSCH ProCore 8Ah battery (also called Profactor)
Just a nice holder for the BOSCH ProCore 4Ah Battery (also called Profactor)
Just a nice Batter holder for BOSCH 18V batteries (not ProCore)
I created this model based off of the left side lever. I have not tried it on the right side (mirrored print). It works fine with just one lever. I printed mine with Bambu ABS-GF and “painted” it with MEK so it feels smooth and looks…
Adjusted the size to fit a Ryobi 18v grinder with a flap sanding disk.
A wall mount for the Bosch Pro GKE chainsaw. The holder was reinforced with a hidden hole, which results in additional internal walls being printed. Do you like it? I always appreciate a like or feedback. German: Eine Wandbefestigung für…
I made an adaptor from my Makita 18v to my Bosch Dust Extractor. I made it in PETG with 20% infill and it has worked great.
Makita battery adapter. I did this project for a personal need, to power portable screens for my work at 12v. I used some electronic components: - Dc dc converter - Power tool for the battery - 5.5mm jack power connector With this project…
A snap on drill bit mount fitting a Ryobi One+ Impact Driver. The mount fits 5 bits. Can be printed in PLA, PETG, ABS, etc.
Materiál: PLA Výška vrstvy: 0,2 mm Orientace: libovolná Podpora: žádná Výplň: 15 % trojůhelník
This is an adapter for Bosch 18V batteries, which are used in the green home series of Bosch tools. I use XT30 connectors for connectivity.
I couldn't find a holder for the older Dewalt batteries, so I made one! I used the keyhole slots from LoboCNC's Drywall Nubs for the mounting mechanism, so go check that out to mount it straight to the wall or you can add it to your…
