Parallel Marking Tool / Contour Transfer Tool
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.13 – €1.39 net (excluding VAT)
For file: ParallelMarker 8mm_1h26m_PLA.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.26 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1.44 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A tool that everyone should have. For easy transfer of contours to a workpiece.
- Rating
- 4.895 / 5
- Likes
- 440
- Downloads
- 1,462
- Makes
- 21
- Views
- 6,178
- Reviews
- 19
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Sometimes a classic contour gauge is simply not the right tool for transferring contours to a workpiece. Especially in furniture making, panels often have to be adapted to uneven walls.
This parallel gauge is simply set to the point with the greatest distance to the plate and then pulled along the entire length. In this way, the exact contour is transferred to the workpiece.
I've uploaded different versions for different diameters of your pencils.
You will also need two M4 nuts and matching M4 hex bolts. Depending on the version and diameter of your pencils between 10 and 14mm.
The pencil does not have to have the exact diameter as specified, using a bit thicker or thinner pencil is also possible.
| Please leave a like if you enjoy my design. Also feel free to check out my other uploads. :) |