Search results: transfer

Counting matching models…

Printables

Transfer Roller Tool for HP LaserJet printers

A little plastic tool required to release the transfer roller from older HP Laserjet printers.

Printables

Toothpaste transfer adapter ELMEX - LION (9mm)

How to transfer toothpaste from Gaba ELMEX to LION CLINICA tubes you asked? Let's design a 3D model adapter quickly. This escalated quickly when one could just use a pipe of 9mm ID pipe instead :-) But hey it does work. Don't forget to…

Order a print of this model

Printables

Jeep Transfer Case Shifter Cable Retaining Clip

Retaining Clip and sleeve for my 01 Jeep Grand Cherokee Transfer Case. Swapped from a 247 to a 242 HD transfer Case. Clip fits both at the transfer case and the shifter itself. Designed to retain the shifting cable for the transfer case.…

Order a print of this model

Printables

Wall Mount Screw Transfer Tool

A simple tool to transfer marks from a keyhole mounted object to a wall or panel. Designed for a 4mm wide screw with a 6.5 mm head. #6 screw is ideal. Place in keyholes and, if necessary, ink the points, press to wall in desired location.…

Order a print of this model

Printables

Gearless 90-60-45-30 Degree Torque Transfer Tool (Angle Drive)

I had a project made, and I realised after that project, it was really hard to print gears and correspond them. When I was searching for a model for a gearless power transfer product, I came across this method, but I couldn't find an STL…

Order a print of this model

Printables

Stiffer Gearless 90-60-45-30 Degree Torque Transfer Tool (Angle Drive)

Order a print of this model

Printables

Shift Knob (Atlas Transfer Case Design)

Shift knob to mirror the atlas transfer case from advanced adapters. It has the standard M10x1.5 thread pitch and will fit Jeep, Honda, and others. Works well with PLA, ABS, and PETG. I recommend PETG or ABS for heat resistance and will…

Order a print of this model

Printables

Leg Extension for Medical Transfer Tub Bench

The Drive Medical Transfer Tub Bench legs are about 1 1/4" too short for a claw foot tub. Thus extension fits into the leg and enables the bench to fit over the edge of the tub. Used a glue gun to secure the extension into the leg. The…

Order a print of this model

Printables

Non-Submersible Transfer Pump Repair - Impeller and Pump Chamber Liner

This print is in reference to an Everbilt brand Model EBTP1 transfer pump, typically sold as a 1/10 HP Non-Submersible Self-Priming Transfer Pump . See the photos for pictures of this pump, as well as a similar but newer model (ZE00802A).…

Order a print of this model

Printables

Hummer H3 Transfer Case Front Output Seal Driver

I made this to drive the front output seal on the transfer case of my 07 Hummer H3.

Order a print of this model

Printables

Transfer bar for SLAB blaster

Modified SLAB transfer bars with captive nut and bolt so that a 3/16 rod can be used instead of a clevis pin. Use Metric M3x10 screws

Order a print of this model

Printables

Transfer Tubes (for All brand detergent)

This is a system for draining All® detergent jugs. As these bottles are large and cumbersome with an offset lid, the upper bottle is held at an angle to ensure complete draining and stability. Assembly The straight tube goes on the…

Order a print of this model

Printables

GM Transfer-case rear seal installation tool.

A tool I designed to be used with a mallet or dead-blow hammer to install the rear transfer-case output shaft seal. I printed it in PETG with 4 sidewalls, 40 % gyroid infill. Printed with a 0.4 nozzle 0.2 layer height.

Order a print of this model

Printables

Lotion transfer tube

Have you ever get tired of not being able to use the lotion or gel at the bottom of the bottle because the tube isn't long enough? Tired of making a mess and spending a lot of time to move the lotion from one bottle to another? This…

Order a print of this model

Printables

Rotor transfer bit for QUIGG MB3 Smoothie maker gun

The picture is slightly outdated. This is v2 with a tighter and sturdier nut hold. I printed this with 50% infill. 0.2mm layers. 3 perimeters. But any config is probably fine, use your own judgement.

Order a print of this model

Printables

Neutrogena Hand cream transfer adaptor

Adapter to transfer Neutrogena Norwegian formula hand cream from full-size (75mL) to travel container (15mL). Printed in PLA. Contact with the cream is minimal so chemical compatibility shouldn't be of great concern.

Order a print of this model

Printables

Omni Directional Treadmill ( Roller Transfer Bearings )

This is mostly a concept design. I have not printed it on my XL yet. If you print this please be smart and wear PPE! Helmet, Knee Pads, Elbow Pads, etc. Also, probably print it at like 50% infill with plenty of shells. Idea is this would…

Order a print of this model

Printables

Head & Shoulders Shampoo/Conditioner Bottle Transfer Adapter

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker If you're anything like me and you hate anything going to…

Order a print of this model

Printables

Trans SLAB Transfer Bar

Someone wanted the Text off of the Trans SLAB I made a while back NONE of my files are to be used or sold by Frontline Foam, by downloading my files, you agree that you are not Frontline Foam and/or related to Frontline Foam or Derrikk Sun.

Order a print of this model

Printables

Tool for transferring silica gel into a bottle

Tool for transferring silica gel to a bottle without spilling after drying in a convection oven

Order a print of this model

Printables

Transferplatte Manta MK2 Fan Duct und MGN12C Gleitwagen

DE Mit dieser Transferplatte lässt sich der Manta MK2 Fan Duct an einer MGN12C Gleitschienenwagen, montieren. Der Anschlag für den x-Endstopp ist links. Ist noch ein Prototyp, der schon ein paar Betriebsstunden auf dem Buckel hat. Für die…

Order a print of this model

Printables

Bottle Transfer Couplers

Excellent Design. No threads to match and a built-in funnel - BRILLIANT !! Check out the original designer's in depth description. https://www.thingiverse.com/thing:2892179

Order a print of this model

Printables

Drill Powered Peristaltic Pump, Gear Oil Transfer Pump

Pumping gear oil by hand is frustrating, use this instead! Chose a quality “engineering” material for best results. I used a Saturn 3 resin printer with Siraya Tech Blu Tough, in Easy Grey. Some tolerances are relatively tight, I highly…

Order a print of this model

Printables

you really tried - transferrable coin

Here's your weapon for when a roommate or family member tries to be witty or clever, and it just didn't work. Flip this coin their way, and you'll have the last laugh.

Order a print of this model

Printables

Parametric LK150 Knitting Machine Transfer Tool

Transfer tool for moving stitches off and on groups of needles on a Silver Reed LK150 knitting machine and for any other machine knitters who use a 6.5mm gauge machine. Useful for cables, garter, increasing and decreasing, and a variety…

Order a print of this model

Printables

1 inch hole center transfer for wood drill

EN: This is a center hole transfer for 1 inch holes, specifically for holes drilled in wood with a 1 In hand drille. There are tow version, the first has a point already included, i would print that out of CF filament (100% infill for the…

Order a print of this model

Printables

Angle Transfer Tool

Screw-clamped arms for capturing angles of internal and external corners. Prints as three pieces: Top, Bottom, and Screw. To use after printing and assembly: Loosen Screw slightly so the Top arm floats between the Bottom and head of…

Order a print of this model

Printables

Harbor Freight Transfer Pump to Vac Bag Adapter

Faced with the reality that all vacuum pumps that are affordable….suck to use. Slow, arduous, annoying, loud, needs charging, or easy to break. Behold! Buy the cheap Harbor Freight Pittsburg transfer pump for $7, print this adapter out of…

Order a print of this model

Printables

Citadel Paint Transfer Tower

This is to allow the transfer of paint from GW/Citadel paint pots to dropper bottles or monument games bottles in a fashion that allows one to do multiple at once. Did the file back in 2023 and haven't needed it much since, will add…

Order a print of this model

Printables

Hose Barb Hosetail Straight Reducing Reducer Adapter Transfer 10mm-6mm

This is a 3D printable model of a pipe reducer designed to connect two irrigation pipes of different diameters: 10mm and 6mm. The reducer ensures a secure and leak-proof connection, making it ideal for gardening, agricultural, or other…

Order a print of this model

Printables

Neutrogena Hydro Boost Gel Lotion Bottle - coupler (or transfer adapter)

Coupler adapter that lets you connect two lotion bottles in order to combine the remnants of an empty bottle. Usage: 1) print file 2) remove pump tops from bottles 3) attach the bottles together using this coupler (emptier bottle goes on…

Order a print of this model

Printables

Flat MX Keycaps for Toner Transfer

This set is very much inspired by Riskable , main difference is support for dust-proof stem and flat profile. Flat profile allows easier toner transfering, you can find template and jig for the transfer process. Tutorial for toner…

Order a print of this model

Printables

80x80x1mm Bed Texture Transfer Test

With the various magnetic PEI bed plates being released I wanted a quick-print to check bed texture transfer to filament. It is best to allow the bed to cool for 15-30 minutes before removing. Approximate print time is 10 minutes.

Order a print of this model

Printables

Suzuki Sierra/SJ413/Samurai transfer case shifter bush.

If you are having trouble with the transfer case being stuck in neutral, you may need to replace the shifter bush. To remove the shifter bush, remove the boot on the inside of the vehicle, then remove the boot on the transfer case, then…

Order a print of this model

Printables

Transfer Pump Wiper Vanes

Print in petg, poly carbonate, ABS, or any filament compatible with petroleum products.

Order a print of this model

Printables

Transfer Funnel

Just a specialized funnel for the large Garnier Fructis bottles with the pump. The pump leaves so much, so I made this to transfer the rest of the old bottle into the new one. It's stable enough to setup and leave standing so you don't…

Order a print of this model

Printables

Transferpette pipette push button

Replacement spare part push button for Transferpette pipette micropipette. Printed from PEG, snug fit on the metal rod. Bit taller than the original.

Order a print of this model

Printables

Citadel to Dropper transfer kit

transfer of paint from Citadel paint pots to Dropper bottles. I had an accident when I missed a mixing ball, causing the entire funnel to clog, so a small piece has been added to the bottom of the funnel to prevent that. I had a supply of…

Order a print of this model

Printables

Powder Transfer Tool

This design is a tool intended to facilitate the transferring of PA12 bulk powder from a 600kg Octabin to supply station cartridges for printing of parts on an HP MJF 580 3D Printer. This build is a long version of my initial proof of…

Order a print of this model

Printables

Geo Tracker Suzuki Sidekick Transfer Case Shift Knob

I made this for my 1997 Suzuki Sidekick which was missing the shift knob. Not sure what the crossover is but if your shaft is 14mm, this will fit just fine. It's a solid friction fit on mine. I printed it with the hole pointing down…

Order a print of this model

Printables

StormTalon Gunship Transfer Plates

I used 1.5 mm layer height and a 0.4 mm nozzle for everything except for pistons, which I used 0.5 mm layer height and 0.2 mm nozzle.

Order a print of this model

Printables

Kuat Transfer V2 Rear Cradle Angle limiter

I made this because when loading a heavier, longer mountain bike (Orbea Wild 2024) to my Kuat Transfer V2, even though the bike is still under the 60lbs weight limit, the rear wheel cradle allows free movement, tilting the bike thus…

Order a print of this model

Printables

Transferidor de filamento V1.0

Para usar em parafusadeira de bateria.

Order a print of this model

Printables

Bottle Emptying Transfer dish for Soap, Lotion, Shampoo, Conditioner

Transfer dish for Soap, Lotion, Shampoo, Conditioner to empty bottles in bath room

Order a print of this model

Printables

Transfer Roller Tool for HP LaserJet printers

A little plastic tool required to release the transfer roller from older HP Laserjet printers.

Order a print of this model

Printables

Filament Transfer Device Diamond Screw Update

The diamond screw for the original was very hard for me to print cleanly, so I made some updates. Print the Shafts with supports. The hex-shaped connectors are marginally taller than they are wide (1mm) so they only fit one way. Split the…

Order a print of this model

Printables

3D Print Your Own Fashion – Transfer Logos & Texts onto Fabric with TPU

Bring your clothes to the next level – with 3D-printed fashion add-ons you create yourself! This project lets you print custom logos, words, or shapes using flexible TPU filament and transfer them easily onto your favorite garments. 🎬 See…

Order a print of this model

Printables

Quick transfer board

快速转运板

Order a print of this model

Printables

Slab Windowed Transfer Bar

Works, and looks good while doing it. used with microArc's wide versions of the Windowed Magwells linked below https://www.printables.com/model/812494-slab-v4-windowed-magwells

Order a print of this model

Printables

Transfer Funnel & Adapter System

It is always slow to drain the last bit of thick liquid stuff from its container. This presents a small challenge when trying to save it. I found my wife using funnels and clamps and trying to balance them for a transfer to the new…

Order a print of this model

Printables

Fox Transfer sl cable stop 31.6

cable stop

Order a print of this model

Printables

Gasket for a utility transfer pump

This is a replacement gasket for DEKO PAS-30 sold on amazon, but is also likely compatible with the similar impeller-style water pumps of the same design. Here's the product page –…

Order a print of this model

Printables

Schmoo Transfer Adaptor for plastic schmoo pump bottles

I designed this adaptor so I could transfer the last bit out of pump bottles into the next one. I hate throwing away the product that the pumps won't reach. This one fits most bottles that have a approximately 25 mm neck which is common…

Order a print of this model

Printables

pipette help to transfer from one dwp96 in an other

we have a test where we transfer one phase from an 2,2mL dwp in an 1,2mL dwp. In our case with a 8-channel pipette.

Order a print of this model

Printables

GMC/Chevy trans/transfer case rear output seal installer

This is a work in progress Printed it with ABS 60% infill to make sure it was solid enough to handle getting hit with a hammer. If printing on the seal side, which I did, I used organic supports.

Order a print of this model

Printables

Tool for transferring contour

Tool for transferring outline of objects onto paper. Designed to work with regular pencils of ca. 7mm diameter. Similar size hexagon pencils should fit too. Can be used as a mini square as well.

Order a print of this model

Printables

Fox Ifp Tool - Transfer Seatpost 2021/2024 - 200mm

Tool per quota Ifp su seatpost transfer fox con travel da 200mm

Order a print of this model

Printables

Liquid detergent transfer connector / Waschmittelflaschen-Verbinder

(deutsche Beschreibung weiter unten) English: Description: This practical adapter allows you to connect two detergent bottles to cleanly and completely transfer the remaining detergent from a nearly empty bottle into a (nearly full) one –…

Order a print of this model

Printables

Dawn Soap Transfer

I made this because I wanted to get the last of the soap from one bottle to the new bottle.

Order a print of this model

Printables

Detergent transfer adapter

General: A simple print for transferring Tide laundry detergent remnants to a new bottle. Why I designed this: I designed this as an entry for the detergent contest. Eventually I will be adding more sizes/brands, but don't have any others…

Order a print of this model

Printables

USS Dripper – Universal Liquid Transfer Funnel

USS Dripper – Universal Liquid Transfer Funnel No space for waste. The USS Dripper is a two-part funnel designed to make transferring the last remains of thick fluids (like laundry detergent) from one bottle to another easy, clean, and…

Order a print of this model

Printables

BMW E90 xDrive Transfer Case Mount Insert

I originally started selling these in 2022, but decided to release the files for free. PowerFlex blatantly copied my design in 2024, so now there is very low demand. So, as a gesture to PowerFlex (perhaps a gesture involving a certain…

Order a print of this model

Printables

Funnel with Integrated Air Vent for Efficient Liquid Detergent Transfer

Transferring thick liquids like liquid detergents into narrow-mouth containers often results in slow flow, spillage, or air-locks due to trapped air. Our innovative funnel design addresses this issue by integrating a dedicated air vent…

Order a print of this model

Printables

Adapter for Zebra ZD thermal transfer printer

📥 Downloaded it? Awesome! If you also hit 💙 and drop a quick 💬⭐, that would be perfect 😎. Got any 🔧 suggestions for improvements? Don’t hesitate to share!

Order a print of this model

Printables

T-shirt ruler for iron on transfers

Tool to help sizing and placement for designing new or bought iron on T-shirt transfers. Measures are in metric cm. I added a colour change for the markings to make them more visible. Rafts: No Supports: No Infill: 20% Filament material:…

Order a print of this model

Printables

Cap of the fire transfer handle Fab Defense TFLQR

Cap of the fire transfer handle. Fits very well. 0.16mm layer printing

Order a print of this model

Printables

Colgate Toothpaste Transfer Connector - FDM Design

This is a connector to transfer between two Colgate toothpaste tubes. Replaces the buttress thread profile from existing models with a compatible ball thread for printing without supports on FDM priters.

Order a print of this model

Printables

SCX10 FRONT MOTOR AND TRANSFER CASE

Front motor mount for injora gearbox , others should fit. Needs M3 square nuts and m3 screws. Transfer case, use parts from the SCX10 gearbox ( bearings and gears ) . M3 x 30 screws and nylocks. Grease if you want. It slows the rig down…

Order a print of this model

Printables

Transfer Tape Dispenser

This design sets the roll back from the edge of the table to allow you to use the full length of your table surface. I recommend leaving a bit of space on the side of your roll to allow for side-to-side adjustments while you're pulling…

Order a print of this model

Printables

Bond knitting machine 8mm 3 prong transfer tool

More flimsy than I would like. for best results use a smaller nozzle and high density infill

Order a print of this model

Printables

Filament sensor transfer Elegoo Centauri Carbon

Raising the filament sensor higher for easier filament pickup

Order a print of this model

Printables

Measuring Divider / Dimension Transfer Caliper

🧰 Simple Measuring Divider (Dimension Transfer Tool) A compact and easy-to-use measuring divider designed for transferring dimensions from hard-to-reach areas where a caliper cannot fit. This version is fixed (non-adjustable) and 10 cm…

Order a print of this model

Printables

TransferPipe Holder

Wallmount holder for transferpipe for your airbrush

Order a print of this model

Printables

Toothpaste transfer adapter ELMEX - LION (9mm)

Order a print of this model

Printables

Cricut Foil Transfer Holder

Small holder for the heads of the cricut foil transfer tool to fit on the lower rack of the turret style Cricut Machine Tool Organizer. Blender script included to generate model with alternative parameters

Order a print of this model

Printables

Transfer Tunnel for Tomahawk cat traps

Adaptor to transfer cats between a tomahawk GT606 and GT608 trap. Problem: you are trapping lots of cats and have traps of different sizes. You need to safely transfer the cats from a large trap to small or viseversa. You have trap forks,…

Order a print of this model

Printables

The Tree Funnel (weed transfer device)

I made this to put on top of my herb grinder and then flip the whole thing over, then I use it to push my herbs into my herb consumption device. It has a holder for a mini herb tool. Weeds expensive, don't waste it.

Order a print of this model

Printables

INJORA CNC Metal gearbox and transfercase mount for KAMAZ chassis

INJORA CNC Metal gearbox and transfercase mount for KAMAZ chassis YOU WILL NEED M3 heat inserts and screws ! this model is only for INJORA gearbox and transfercase. Tento model je urceny prestne pre prevodovku a transfer case INJORA.…

Order a print of this model

Printables

Flashforge AD5M filament sensor transfer

Holder for filament sensor transfer on top for Flashforge Adventurer 5M

Order a print of this model

Printables

Manual Transfer Switch for Single Circuit

I recently designed a battery backup system for a well pump, and saved a tremendous amount of money in the process (video below). But without some sort of transfer / changeover switch, getting the well pump on battery power was obviously…

Order a print of this model

Printables

Laparoscopic Manual Transfer Training Plate

Laparoscopic Manual Transfer Training Plate – 3D Printable This is a simple training plate designed for basic laparoscopic manual transfer exercises. I’m not a specialist in medical didactics, but I enjoy 3D modeling and created this…

Order a print of this model

Printables

Parts Transfer Trays / Scoops (2-Pack) | Screw, Nut, & Washer Sorting Funnels

I am pleased to present this set of transfer trays for small fasteners. These practical tools are essential for anyone who regularly works with small components like screws, nuts, washers, and bolts, and struggles with quick, efficient…

Order a print of this model

Printables

Gallon Jug 38-400 transfer lid

Useful to get every last drop of your product into a new jug.

Order a print of this model

Printables

45 Degree Power Transfer

Educational fidget toy, showing a way of transmitting power over 45 degrees.

Order a print of this model

Printables

Toothpaste Transfer Tube

Transfer tube with outside thread added to screw into my tootpaste tube squeezer

Order a print of this model

Printables

Fox Transfer Service 2018-2020 Tool like 803-01-127

If you have a Fox Transfer dropper post from the years 2018 to 2020 and you want to service it, you need a 500€ tool (803-01-127) to open the post. If you print my tool with a 3D printer and then use a plastic tube, you can also knock it…

Order a print of this model

Printables

Implant Print Transfer Cap Replica

A small replica for the transfer clip for implants print transfer. SLA printing only. You know which brand they are for. I recommend printing the original file in 1.00 scale and 1.02, as the fit might be a bit tricky to get depending on…

Order a print of this model

Printables

Ford 4X4 transfercase Cover

So the PCM, motor, or switch for your Borg Warner electronic 4X4 goes out in the dead of winter, what do you do? You could go out and spend hundreds of dollars on parts or even a band on diagnoses, parts and labor, or you could grab a…

Order a print of this model

Printables

DJI Osmo Pocket charging & file transfer stand

High stand for the Osmo pocket to allow for easy access to both the USB-C port and the screen. Two sizes included.

Order a print of this model

Printables

Jeep Transfer Case Shifter Cable Retaining Clip

Order a print of this model

Printables

Wall Mount Screw Transfer Tool

Order a print of this model

Printables

F1 T-Shirt Transfer

I love F1 and have created this iron-on transfer. The car silhouette is created using all the F1 tracks and can be ironed on to a t-shirt. You can scale the design to suit your garment. Print in PLA at 0.28mm layer height with your wall…

Order a print of this model

Printables

Liquid Transfer Funnel

A practical funnel designed for easy liquid transfer between bottles and containers. Ideal for pouring leftover soaps, cleaning products, detergents, or other household liquids without spills. The stepped diameter design allows…

Order a print of this model

Printables

Purell bottle transfer tube

Simple tube for transferring the last bit of Purell liquid from one bottle to another. Just put the tube on the bottle transferring to and then put the other bottle on top of the tube. Recommend making sure there is enough room in the…

Order a print of this model

Printables

Gearless 90-60-45-30 Degree Torque Transfer Tool (Angle Drive)

Order a print of this model

Printables

Stiffer Gearless 90-60-45-30 Degree Torque Transfer Tool (Angle Drive)

Order a print of this model

Printables

Bottle Transfer Coupler 32.5mm - 25mm

This is a remix of these couplers found on thingiverse: https://www.thingiverse.com/thing:2892179 Specifically, the remix combines two of the couplers to allow a 32.5mm bottle on top to drip down to a 25mm bottle. As with the originals,…

Order a print of this model

Printables

Heat Transfer Experiment Fan Aligner_Lattice Structures

Origional component design for FDM fabrication in application of research project “What Makes Injection Moulds Cool? An Experimental Study into The Heat Transfer Properties Of Stereolithography Manufactured Injection Moulds”

Order a print of this model

Printables

M12x1.75 Transfer Screw

This tool is used to transfer the location of hole centers. It fits M12x1.75 holes; after printing, it's suggested to run a die over it to clean up the threads. The transfer screw can be inserted with an 8mm socket or hex bit. Printed in…

Order a print of this model

Printables

Shift Knob (Atlas Transfer Case Design)

Order a print of this model