Late Model KTM/HQV/GG Chain Tension tool
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.90 – €1.09 net (excluding VAT)
For file: PETG-.2mmHeight-.4nozzle.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.00 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 1.1 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Used for setting the slack in a late model KTM chain that specifies 55-58mm slack. Works with Husqvarna and Gas Gas too.
- Rating
- 5 / 5
- Likes
- 117
- Downloads
- 1,108
- Makes
- 6
- Views
- 6,149
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This tool is handy for quickly setting the tension on late model KTM/Husqvarna/Gas Gas 125-501 dirt bikes that has a specified slack of 55-58mm, measured between the top of the swing arm and the bottom of the chain.
Note: this has only been tested to work with the OEM chain slider. Dual sport models may need to remove the chain guard.
To use:
- Raise the rear wheel, completely unloading the suspension.
- Put the bike in gear and rotate the wheel forward so the bottom of the chain is taught.
- Slide the tool between the chain and the chain slider on the top of the swing arm, aligning it with the bolt that holds the chain slider to the swing arm.
- If the tool slides in with moderate pressure and causes the chain to be “loosely taught” all around, you've reached the correct chain slack. If you grab a link and rock it back and forth, it should wiggle a small amount.