Parkside battery to Ryobi tool adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parkside battery adapter for Ryobi tool. Mixed two pieces of work together, I admit that. Did some modifications so…
- Rating
- 4.778 / 5
- Likes
- 112
- Downloads
- 1,062
- Makes
- 13
- Views
- 7,341
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Parkside battery adapter for Ryobi tool.
Mixed two pieces of work together, I admit that.
Did some modifications so they fit together.
You need to print:
- 1x top
- 1x bottom
- 2x clip
And extra:
- 4x 6.3mm Faston male crimp connector, "blue" (accepts 1.5 - 2.5 mm2 cable) but without the plastic protective tubing
- 2x ~10cm cable (I advise 2.5 mm2)
- CA glue or any "fast" glue
- 1x some small spring (from a pen, split in half)
a)
- 4x M3 screws
- 4x metal M3 threaded inserts that you put in with heat (f.e. with soldering iron)
- you can also screw it in directly
b)
- or just glue it togehter :-) (but watch the alignment!)
Put the cable through the holes, crimp or solder the connectors, glue them in place. If something is tight, help it with a little heat (soldering iron), but be careful. It should work 99% straight out of the printer.
Connecting just the two connectors on each side (+ & -) works for the tool, but don't try to charge it with Ryobi charger. Charge the battery with Parkside charger only!
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
30
Filament: any PLA / PETG
Notes:
Top (tool part) and Clips can be printed without supports.
Bottom (battery part) piece require supports.
Origin - remix from:
https://www.thingiverse.com/thing:1248463
https://www.thingiverse.com/thing:3649747
https://www.thingiverse.com/thing:3114131
Category: DIY