Roboter tool - measuring TCP/Base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tool for measuring TCP, base, in tools and fixtures when programming robots.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 847
- Makes
- 0
- Views
- 2,699
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Easy tool for measuring TCP and Base on robots. Positioning with magnets. Thanks to strong magnets and lightweight plastic, there is no displacement when touched. Each attachment has a screwdriver hole in it, in case the thread in the base breaks. Covers are provided for the bases for transportation, to protect against the influence of the magnet on other devices.
Tip (tip + insert + Screw-In Point Bullet)
- Screw-In Point Bullet = https://www.streleckyraj.cz/hrot-saunders-bullet-11-32-125grs-1ks.html
- insert = https://www.streleckyraj.cz/insert-do-sipu-luku-beast-hunter-0.html
(insert silou zatlačit do hrotu - force the insert into the tip)
Base diameter 32mm
- Magnet = https://www.unimagnet.cz/p-32_z804/
During printing, insert magnet into the base
Base diameter 20mm
- Magnet = https://www.unimagnet.cz/p-20_z806/
During printing, insert magnet into the base
Base cover 32/20mm
- washer up to 24mm diameter, inner diameter over 8mm, 2mm height
- During printing, insert into the base cover
Plastic tip
Extension
Coupling
Large case
Small case
Pinhole tip
Pinhole to thread adapter