1 / 4
Lötkolbenhalter für Einschmelz-Gewindeeinsätze/ Soldering Iron Holder for Melt-In Thread Inserts — zdjęcie 1
1 / 4

Lötkolbenhalter für Einschmelz-Gewindeeinsätze/ Soldering Iron Holder for Melt-In Thread Inserts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

6,54 € – 7,99 € netto (bez VAT)

Dla pliku: Alle Teile_0.2mm_PETG_MK3S_7h57m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 7,26 € netto (środek widełek).

Masa podana przez autora
82 g
Czas druku podany przez autora
7,95 godz.
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Werkzeug zum Einspannen eines Lötkolbens der zum Einschmelzen von Gewindeeinsätzen benutzt wird.

Ocena
5 / 5
Polubienia
25
Pobrania
216
Wydruki
0
Wyświetlenia
2292
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Siehe auch dieses Modell

 

Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. So können Einschmelz-Gewindeeinsätze rechtwinklig in Bauteile montiert werden.

  • Es ist kein Support zum Druck nötig.
  • Bei dem Spanner darauf achten, wo der Gewindeeinsatz eingeschmolzen wird (siehe Bilder).
  • Das Profil geht nur in einer Position in den Winkel, da eine Ecke stärker abgeflacht ist.
  • Die Aufnahme des Lötkolben ist 20,6mm, so das (wahrscheinlich) auch ähnliche Lötkolben benutzt werden können.
  • Der Knopf wird mit Sekundenkleber auf eine der Schrauben M3x12 geklebt. Damit kann der Schlitten ohne Werkzeug fixiert werden.
  • Der Griff kann links oder rechts befestigt und werden.


Das benötigt man auch:
4 Stück Zylinderkopfschraube M3 x 8
6 Stück Zylinderkopfschraube M3 x 12
1 Stück Gewindestift M3 x 12
12 Stück Einschmelz-Gewindeeinsatz M3
4 Stück Holzschraube 3,5 x 20
1 Stück Holzplatte ca. 200x250mm; 16mm dick
1 Stück Lötkolben (Durchmesser zum Klemmen 20,1 - 20,5 mm; z.B. https://www.amazon.de/dp/B09LHGYVJR/ref=cm_sw_r_apa_i_1CZFJD6TTGBPDSC1T2JG_0?_encoding=UTF8&psc=1)

 

Translation DeepL

See also this model

This is a tool for clamping a soldering iron. This allows fused-in thread inserts to be mounted into components at right angles.

No support is required for printing.
With the clamp, pay attention to where the thread insert is melted in (see pictures).
The profile goes into the angle only in one position, because one corner is more flattened.
The soldering iron mount is 20.6mm, so (probably) similar soldering irons can be used.
The knob is glued to one of the M3x12 screws with super glue. With this the slide can be fixed without tools.
The handle can be fixed left or right and.


You also need:
4 pieces cylinder head screw M3 x 8
6 pieces cylinder head screw M3 x 12
1 piece set screw M3 x 12
12 pieces fused thread insert M3
4 pieces wood screw 3,5 x 20
1 piece wooden plate approx. 200x250mm; 16mm thick
1 piece soldering iron (diameter for clamping 20,1 - 20,5 mm; e.g. https://www.amazon.de/dp/B09LHGYVJR/ref=cm_sw_r_apa_i_1CZFJD6TTGBPDSC1T2JG_0?_encoding=UTF8&psc=1)

Tagi