1 / 8
Plus Insert for Core One +/L
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add a nice splash of color to your printer with this easy to print insert for the Core One +/L spool holder.
- Rating
- 5 / 5
- Likes
- 46
- Downloads
- 125
- Makes
- 11
- Views
- 458
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Since there is no purpose for the little plus on the spool holder, (That I am aware of) I thought designing a little insert would add a nice bit of color.
The plus insert is a press fit, so it should slide in easily without coming out. If it is too tight you can press it down in with a flat surface, or if it is too loose add some supper glue. Since Prusa printers will print mostly the same you should be fine.
Print Settings
Layer Height: | 0.1 | Support: | NO |
Infill : | 5% | Brim | NO |
Material: | PLA | Filament Designation : | Orange |
More Designs:
 |  |  |