Ender-3 Lack Enclosure Vibration Dampener
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dampeners for the Z axis extrusions.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 32
- Makes
- 0
- Views
- 355
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This design puts a compressive force on the z-axis extrusions, making your printer as stable as the enclosure. This works incredibly well, especially with your enclosure secured to the wall.
I printed them in PETG to avoid creep, ASA would even better. Your mileage may vary with PLA.
The file contains all three parts. If opening in Prusaslicer, don't open it as a single model with multiple parts.
The parts are symmetrical and do not need to be mirrored, printing the model twice will have you covered.
Flip the brace and base upside down. The base is printed with the circular face on the bed. The brace is printed with the big flat contact surface on the bed.
It is made for M3 socket-head screws and M3 T-nuts, although you could probably get by without hardware considering how the force is applied.