Ender-3 Lack Enclosure Vibration Dampener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dampeners for the Z axis extrusions.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 355
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This design puts a compressive force on the z-axis extrusions, making your printer as stable as the enclosure. This works incredibly well, especially with your enclosure secured to the wall.
I printed them in PETG to avoid creep, ASA would even better. Your mileage may vary with PLA.
The file contains all three parts. If opening in Prusaslicer, don't open it as a single model with multiple parts.
The parts are symmetrical and do not need to be mirrored, printing the model twice will have you covered.
Flip the brace and base upside down. The base is printed with the circular face on the bed. The brace is printed with the big flat contact surface on the bed.
It is made for M3 socket-head screws and M3 T-nuts, although you could probably get by without hardware considering how the force is applied.