Prusa XL 2T Rattling Noise Dampeners (cancels rattling noise)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Noise dampeners to fix the loose metal tool head screw holding strip to the frame so it stops rattling during printing.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 68
- Makes
- 4
- Views
- 768
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
If you got the Prusa XL 2T (i.e., with 2 tool heads), then you will likely also experience a very annoying rattling sound when x and y axes are engaged together during printing. This could get so loud, I was not able to print during the night, and it was annoying to watch TV next to it.
After a lot of checking, I finally found the culprit: the metal strip in the metal frame part where the tool/print heads are screwed in is loose on the end where you don't have the other 3 print heads installed, and at certain frequencies it starts to resonate and rattle against the metal frame.
There is a quick and effective fix: just print the dampeners here and use the spare M3x12rT screws to screw these in the same way you would otherwise install the additional 3 tool heads, using the torque screw driver provided with the XL. See pictures.