1 / 4
Prusa XL 2T Rattling Noise Dampeners (cancels rattling noise) — zdjęcie 1
1 / 4

Prusa XL 2T Rattling Noise Dampeners (cancels rattling noise)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Noise dampeners to fix the loose metal tool head screw holding strip to the frame so it stops rattling during printing.

Ocena
5 / 5
Polubienia
10
Pobrania
68
Wydruki
4
Wyświetlenia
765
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

If you got the Prusa XL 2T (i.e., with 2 tool heads), then you will likely also experience a very annoying rattling sound when x and y axes are engaged together during printing. This could get so loud, I was not able to print during the night, and it was annoying to watch TV next to it.

After a lot of checking, I finally found the culprit: the metal strip in the metal frame part where the tool/print heads are screwed in is loose on the end where you don't have the other 3 print heads installed, and at certain frequencies it starts to resonate and rattle against the metal frame.

There is a quick and effective fix: just print the dampeners here and use the spare M3x12rT screws to screw these in the same way you would otherwise install the additional 3 tool heads, using the torque screw driver provided with the XL. See pictures.

Tagi