Tacx Neo 2T vibration dampener

This model is used to reduce the amount of vibrations transferred to the floor that get produced by the using the Tacx Neo 2T.
In my opinion this makes it not only less noisy to others in the building but also to your self.
Besides the main effect of dampening vibrations they also add a bit of movement to the ride which I personally do like but could also be seen as unstable.
Due to the raised trainer you might need to also raise your front wheel support to avoid issues with the chain rubbing against the Neo 2T.

The tennis balls used are https://www.amazon.de/dp/B0DSC68Y8S.
I am not sure if other ones are different in size or strength.

For a better fit I wrapped the part that goes into the Neo 2t with in one round of insulation tape.

I printed them upside down with supports in Prusament Galaxy Black PETG with a 0.4mm nozzle, 0.2mm layer height, 30% grid infill, 6 top solid layers, 5 bottom solid layers and 3 perimeters.
This way they were able to support me at slightly above 100kg when riding sitting down.

I currently do not have any experience on how long the tennis balls keep enough pressure to not collapse under the weight.

I assume no responsibility for any damage to persons or property resulting from the use of this 3D model. Use at your own risk!

If you use them I would be happy to see you post a make and share your experience!