Counting matching models…
Combines the benefits of free-hand sharpening and a fixed-angle system. It takes less space than a full fixed-angle system, allows you to use any stone, and is quicker to use. Just put a knife on a magnet, set the angle with a screw, and…
English (This translation is computer generated): Fidgets combine fun and learning. In my remix, they cover two basic arithmetic operations – multiplication and division. They are ideal for playfully practicing multiplication and…
This is a snap-in holster for the "GS, Tajwan Bokken Training Ktana" ( https://militaria.pl/p/miecz-treningowy-gs-bokken-14897 ), although you'll need one M5 x 16 screw and nut to attach the holster to the belt clip. This is ment to be…
This training dummy is a 3D printable prop designed specifically for dioramas, miniature environments, and tabletop scenes . Inspired by classic wooden training dummies, it works perfectly in training yards, fantasy scenes, dojo settings,…
Hang board for use for portable training or your own home gym. I used 1100 paracord for the loop but you can use 550 cord as well. Feel free to adjust the size to suit you. I would recommend putting some kind of fuzzy skin on there to add…
Dummy rounds to turn empty casings into Snap Caps. Push 3d print into the case /tight fit), and check the overall length is under 30mm.
This model is designed for practicing the Kodokan Goshin Jutsu no Kata in Judo. It respects the official dimensions used in practice: Barrel length: 20 cm (≈7.9 in) Thickness: 19 mm (≈0.75 in) No trigger hole – prevents fingers from…
Made a hula hoop since I couldn't find a model out there to suit my needs. Should print well enough on it's own since it is at 45 degrees but I recommend pausing the print and taping it down to secure it. I did have two fall right at the…
🌱 Growix RootCore Cup — 3D Printable Seedling & Root Training Pot Strong roots from day one. Designed for continuous growth. The Growix RootCore Cup is a 3D-printable seedling pot developed to support healthy root development and…
Das ist ein Gitarrenhalt mit dem man die Griffe/ Akkorde üben kann. Auch praktisch für unterwegs, weil es weniger Platz wegnimmt, als eine richtige Gitarre.
I liked the concept of the "Olympic Barbell Vertical Wall Mount" so much that I wanted to modify it to fit some of my training weight bars. It was scaled down in size as the bar only weighs 7kg and modified it to fit M6 screws I wanted to…
This training dummy is a 3D printable prop designed specifically for dioramas, miniature environments, and tabletop scenes . Inspired by classic wooden training dummies, it works perfectly in training yards, fantasy scenes, dojo settings,…
This is a very simple model for a Pickleball target that clips on the net to train the proper hit height on dinking, dropshots, and drives. I made one out of PLA that I blasted with a drive (it was hit the back wall hard lol) from the…
3D COLLECTION MODEL OF A TRAINING butterfly knife Assembly consists of: The trainer blade Two handles Axial bushing Washers (optional) a blunt blade with holes working folding mechanics separate details SAFE. Material: PLA/PETG Layer: 0.2…
Same as @TANK_361038 "Same diameter as the real thing. A fun tool to add to your training and work your pinch/grip strength. The clip gets printed flat for maximum strength then clips into the body with 2 detents. Print the clip with 6…
Description This 3D printable handle system is designed to help children practice their first hanging and gymnastics movements safely and comfortably. The handles can be attached to a broomstick, wooden bar, or similar support using…
15 degree foot wedge training aid based on the Callaway Power Platform. My coach used it in a lesson to help reduce swaying in my swing and encourage more hip rotation and better weight transfer - to save money, I decided to make my own!!…
Self explanatory. Dummy Tanto-ish training knife for martial arts or film. Print it in green for post production. Or use it for Cosplay. Just don't poke your eye out. Well its not really that pointy but for some that doesn't matter. Print…
English (This translation is computer generated): Fidgets combine fun and learning. In my remix, they cover two basic arithmetic operations – multiplication and division. They are ideal for playfully practicing multiplication and…
Hub Pinch Grip Training Tool Elite Pinch Strength : Specifically engineered to develop raw power in your thumbs and fingertips. Three Precision Heights : Includes 12mm , 25mm , and 40mm options to target different ranges of motion and…
You have seen the training aids that are designed to help you control your arms through your swing. The ball is designed to be printed in TPU so that you can gently squeeze it between your forearms. The teather attachments can be printed…
Design credits The mechanical and structural design of the camera body was created by: José Aguiomar Foggiatto, PhD Mechanical Engineer Professor at the Federal Technological University of Paraná (UTFPR), Brazil He is the original…
Finally, a training butterfly knife that actually lets you adjust the balance and weight to match your skill level and preferences. Unlike standard practice balisongs, this print-in-place model features M5 screw ports in the handles and…
Some people use markers and white t-shirts for knife sparring or drills in martial arts classes to see if they got "hit". I came up with the idea to use a chalk line like used in construction to mark each other with less permanence. I…
Description This project presents a 3D-printed simulator for training in lumbar spine endoscopy , developed as reproducible educational tool. The simulator allows training of basic endoscopic spine surgery maneuvers such as: • spatial…
The Penny Trainer – Adjustable LST Plant Trainer The Penny Trainer is a simple adjustable plant training tool designed for low stress training (LST) . Instead of forcing branches into harsh bends with typical LST clips or tying them…
An easy and fast to print trainer, for training or prop use. Wrap the handle with paracord or material of choice. Lace? I won't judger. It has a hole for accessorizing with lasers or an ACOG. No noob tubes allowed. Printed flat at 100%…
Tento set představuje kompletní 3D tištěný GlucaGen Training Kit , který slouží k realistickému nácviku aplikace při těžké hypoglykémii. Celá sada je navržena tak, aby ji bylo možné z 70% vyrobit na 3D tiskárně , přičemž konstrukce…
I used waste pipes and M6 screws from hobby market. Some turnable casters from old furniture and plywood desk 16mm. The container is not 3D printed but you can print it out. It is part of the model. If you have pipes with other diameter…
My uncle sent me this file and asked me to print it but asked if i can add handles for holding them. I added the handles and that is what this is.
Design Concept This flexible connection carrot is primarily designed for children's early learning, aiming to attract children's attention through brightly colored interlocking segments and stimulate their hands-on and observational…
3D‑Printed Reaction Trainer – Reflex & Catch Training Tool Boost athletic performance with this 3D‑printed Reaction Trainer designed to challenge the brain, body, and reflexes all at once. Whether used for sports training, conditioning…
You want to teach yourself a new skill, but as a beginner, it is sometimes difficult to pay attention to many things at once. Especially if you are not sure if you are doing things right. To eliminate at least one variable, here is the…
This model is a 3D printable Diabetic Foot Training Model (DFTM) developed for training, prototyping and engineering use in a medical context. The model includes multiple pseudo-clinical wound features inspired by typical diabetic wound…
Combines the benefits of free-hand sharpening and a fixed-angle system. It takes less space than a full fixed-angle system, allows you to use any stone, and is quicker to use. Just put a knife on a magnet, set the angle with a screw, and…
3D-Printed Arthroscopic Camera Housing This model represents the 3D-printed housing of a low-cost arthroscopic camera developed for use in a knee arthroscopy training simulator. 3D-Printed Knee Arthroscopy Simulator (Scientific Validation…
Really liked the original model but I didn't want the text on there so I removed it. While I was doing that I also removed the magnet holes on the bottom and added some internal magnet holes into the print so that you can't see the…
Do not download, and just ignore - I'm just testing capabilities, hope next ones will be much more helpful :)
This is a snap-in holster for the "GS, Tajwan Bokken Training Ktana" ( https://militaria.pl/p/miecz-treningowy-gs-bokken-14897 ), although you'll need one M5 x 16 screw and nut to attach the holster to the belt clip. This is ment to be…
DISCLAIMER: THIS IS A GUN MODEL WITH NO FUNCTION. IT HAS NO MOVING PARTS, AND IN NO WAY CAN WORK AS A FIREARM WITHOUT MODIFICATION TO THE MODEL. FURTHERMORE, THE DESIGNER OF THIS MODEL IS IN NO WAY RESPONSIBLE FOR ANY ILLEGAL ACTS…
Please not the closed endcap has a slightly tighter tolerance, then the open one. Therefore the closed endcap is not made for removal. The open endcap is removable by slightly twisting it. The Pipe used in the picture is 50mm. The length…
This is a simple holder for european style cylinders. It can be clamped to a table and prints in less than one hour on my machine. Please refer to the attached image for the print orientation. Supports are required as well as an outer…
This is a small, low cost, block and tackle that was created to demonstrate their use. It's intended to be used with smaller diameter paracord, and is held together with a M2x12 socket head cap screw (no tap required to install, just…
A 3d-printable sleeve to replace the paper sleeeve of the Multipick combination training lock set . Please note: The sleeve is designed with an tight fit, after a few days the foam will shrink and the sleeve has a good fit.
8cm diameter ball for grip/hanging training. “Hole in the ball ;)” is 7mm wide - i used 5mm rope to hang the ball. I've printed mine with PETG
Small egg for dog training. I use it for training with truffles. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0,15 Infill: 20 Filament: any PLA any Category: Pets
7cm bottom / 3cm top cone for grip/hanging training. Hole is” is 10 mm wide - i used 6mm rope with it
Yet another clip for low stress plant training :) you know how to use it, because u searched for it :) have fun ! print with 0,2 layer and PLA is totally fine !
Just a simple 1*1 TTRPG mannequin / training dummy Printed in PLA at 0.2mm and 10% infill No support needed Compatible for 1*1 inch grid map To assemble, print 2 of them and glue the two part together
Designed to print without supports, and the included 3mf file is set up for a multi(two)-color print (printed on a bambu p1s) . Four insets on the bottom of the restraining bolt allow up to four 15mm x 3mm magnets to be press-fit into…
This four-part fox dummy is designed specifically for dog training purposes. Consisting of a head, middle, back and tail sections, it aims to provide a realistic training tool for your dog. The design is modular, allowing for weight and…
This allows you to train tying down a boat at a cleat. The Threaded pole takes a 7mm rope that can be clamped down with the screw head. Happy tying!
I had previously re-mixed some dog scent training capsules that had a magnetic base - https://www.printables.com/model/936563-magnetic-dog-scent-training-capsule My daughter wanted to use the capsules with a cheap rubber safety non-slip…
BJJ training dice Original file found here → https://www.thingiverse.com/thing:3055684#:~:text=Dice%20for%20randomizing%20jiu%20jitsu%20rolls.
It's mid-October, and that can only mean one thing: Bonne Maman has begun selling their advent calendar of jams, jellies, and preserves. If you, like me, have an absurd number of mini jam jar lids cluttering your kitchen drawers, why not…
Train your fingers! It's ideal for climbing or other climbing sports! The holes are ideal for hanging it on ropes STL and Gcode 20mm
The 3D Printing User Certification Trinket can be printed as 4 pieces in different colors and can be awarded to someone on your team or in your class who has completed the basic training on 3D printing software and hardware, including: An…
Potty guard for mounting under toilet seat using double stick tape. When talking about the Front oval diameter, this is imagining a circle in the front of the seat opening: How wide would that circle be. These are notched so they can be…
I needed a weight loading pin for loaded finger training. Printed in two halfs out of PETG, glued with Epoxy holds at least 50 kg just fine
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
A 3D printed support designed for medical suture training, optimizing both learning experience and resource efficiency. Key Features Creates optimal skin tension simulation for realistic suture practice Compact design (75mm x 65mm) ideal…
This is a modular hangboard system for training finger strength and finger health for rock climbing and bouldering. This modular hangboard system is made to be supported by a wood board in the back. I glued two pine boards of 18mm…
you can buy a PVC pipe, put it inside the hole in the print and stick the pool noodles on it
Replacement pads for generic cheap “Smallest Dog Training Collar”. My puppy chewed the pads off the collar. Shock feature doesn't work with TPU pads, but I don't use that feature anyway, just the vibrate. Printed in TPU, 15% infill.…
is it a sign, is it a comment? we won't know until the neigbours react
I made a set of grip tools for climbing/armwrestling training All of these models have been tested for about 75kg (with the provided print settings) Most of them are tagged with my online moniker “Bobbzorzen”, feel free to use the fusion…
DISCLAIMER: I DO NOT condone violence against another person. Furthermore this is intended as a training device to assist in making dangerous jobs a little safer. Use this model/device at your own risk in a controlled environment. This is…
Can be printed with one or two color changes. The first color change should change the color of all the text. The second will just change the color of “DO NOT”.
Hang board for use for portable training or your own home gym. I used 1100 paracord for the loop but you can use 550 cord as well. Feel free to adjust the size to suit you. I would recommend putting some kind of fuzzy skin on there to add…
print as many links as you need to fit snuggly behind the ears of your dog. Additional materials: 1 x M3 x 20mm machine screw per link 20cm piece of paracord M4 carabeine or other clip
A two-part clip for attaching binding wire to fabric pots. It can also be used as a tarp tensioner. For this, the fabric should be doubled to ensure a secure hold. Simply attach the clip and put the sleeve over it until it clicks. To…
Reusable ampules for training purpose (NOT FOR MEDICAL USE!). In order to achieve a bit of transparency : use transparent PETG and print in vase mode.
Sturdy knife for self-defense training. With a small ball at the edge to prevent injuries. Preferably print with 100% Remade from other model But with some changes to be easier for printing with no faults Follow My Group:…
Printed with an 0.8 Nozzle. You will need to M5 Screws to fix it at the desired angle. This is made for 8mm allignment sticks. Also added a small pocket to place some counter weights.
Das robuste Landegestell für meinen X3 wurde langsam zu unhandlich. Darum habe ich ein leichteres, und einfach zu demontierendes Landegestell konstruiert. Das Original-Landegestell verbleibt an Ort und Stelle, die Befestigung erfolgt nur…
Du brauchst 2 Teile wie im Download. Da die Landekufen des OMP M2 nicht parallel sind müssen die Teile für die andere Seite entlang der Längsrichtung gespiegelt werden! Das Original-Landegestell verbleibt an Ort und Stelle, die…
An improved clicker body for dog training.
This is a multi-function climbing grip/finger strength trainer. **The strength of 3D prints can vary significantly depending on the calibration/filament/temperature/etc. Use at your own risk** Includes: 100mm, 60mm, 40mm, and 20mm pinches…
This little box works great to store tiny things!! (How to print) 1.Under files click slice 2.Select yes on the following prompt 3.Right click on model 4.Select split from the menu 5.Select to objects That's all you need to get it to be a…
Model of baton for training selfdefence, or something similar.
Training door for CloserPets / CateMate cat door for glass panels. Ideal while your cat is still getting used to open the new flap. Swings freely , so it's much easier to open. Important! This door has a very loose fit and it's not wind…
A simple addon for the coldsteel Leatherneck S/F [link] training knife to transform it into an inexpensive parry dagger for rapier fencing. This is intended for use with nylon waster/trainer swords, not for impact with steel! Printed from…
Print the two halves of the off-ice training puck, then glue the flat faces together. For best results, print with 6 walls for added strength, and adjust the infill percentage based on the desired weight of the puck.
FTC 10544 Cyber Eagles of Sherwood Park, Canada have designed a set of braille blocks to assist teaching blind or visually impaired persons to read. Literacy is the foundation of learning.18 Sets were produced and given to the CNIB and…
Legal size braille letter blocks that fit perfectly into the braille board that houses 56 blocks at a time. There are holes behind each slot allowing for easy removal of all letter blocks. Each block has its corresponding letter on the…
Replacement for the original HPS training board components baseplate.
All the fufu clips you ever need. This bundle has six different models, each with an engraving option between "sissy" and "slut". A Fufu clip is a simple device that you can use to painlessly rearrange your genitalia to create a more…
My son loves your model with latch. Thank you Pyciu for sharing.
I wanted to sell this device along with custom versions for precise fit but at the moment I cannot do that so here's the standard symmetrical version of “The Brekfast”. Features 2 different sizings for unlevel edges at 30mm depth and with…
I've used a couple of other sleeves over the past year or so including one that is printed in vase mode, and I've been really happy with them right up to the point where I've dropped them, or overturned my tool drawer, and every time they…
Idee: In unserer Dummy-Trainingsgruppe werden an einem normalen Trainingstag etwa 40 Dummys von 8 Besitzern verwendet. Am Ende werden die dann untereinander wieder getauscht. Das dauert sehr lange, daher wurde eine farbliche…
