HP 260 G2 mini HDD/SSD caddy screw dampener
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement dampeners for HDD/SSD caddy for HP G2 mini PC
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 59
- Makes
- 2
- Views
- 313
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
This is a simple replacement dampener for the HDD/SSD caddy for HP mini PC.
Made for HP 260 G2 mini, might fit similar models, compare your caddy to the images.
It holds the SSD/HDD firmly and works well with the lock mechanism.
I printed it using PLA which is fine for an SSD, if you're using HDD it's highly recommended to print with TPU or other soft materials to act as a vibration dampener and shock absorber to help protect the HDD.
Use M3x6mm screws, I used M3x8 but made sure that it doesn't press on anything inside the SSD.
No supports needed in case printing with TPU.
Could be tightened by hand with just the friction, a screwdriver/key is not required.