CR6 Top Gantry Spool mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made my CR6 Direct drive and had no where to put the spool to feed directly into the extruder.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 81
- Makes
- 2
- Views
- 908
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I had made the mount because I didn't want to keep the spool on the side while I had the printer converted to direct drive. I found nothing else and the mount I did use before made me nervous about how to keep the spool.
Material - PLA
Infill - 10%
Supports - Yes
Hardware - 3 - M5x8 (the M5 screws that come with the handle maybe used, but it might not keep the mount snug.)
3 - M5 T-nuts
1 - M3x25 (you can use the screw that the mount comes with that attaches to the mount on the side of the printer. I use a T-nut to keep it secure.