Pi 4 Case and Pi Cam Case for creality CR6
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Pi4 Case that fits onto the aluminium extrustion of the Creality CR6. Also a Pi Cam 1.3 case and mounts to connect to
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 35
- Makes
- 0
- Views
- 368
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Pi4 Case ans Pi Cam 1.3 Case and mounts for the X-axis on the creality CR6.
I have recently started using klipper on the CR6 and created this Pi4 case to mount on the side of the printer and also a mount fo the Pi Cam to attatch to the X-axis to create timelapses.
Prints at 0.2 layer height
There are spaces for M3 nuts to fit into the top of the case for mounting a fan and also spaces in the bottom of the case for closing it together. Pause print to insert nuts.
M3 Bolts are used for mounting the fan, joining the top and bottom cases and joining the case to the aluminium extrusion cover.
The Original bolts that hold the CR6 screen are used to bolt the extrusion cover to the printer.
For the Pi Cam case M2 Nuts and bolts are used and M3 Nuts and Bolts are used for the mounts and the arms.
To Attatch the Mount to the X-axis you will need a longer M5 bolt which passes through the lower Z-axis bearing approx 54mm
I have added 2 versions of the cam mount for the arm wich are mirrored and 2 versions of the cam back with a 90 degree turn of the mount to allow better positioning of the cam
14/03/23 - Added a top that allows a 40x10 fan to be mounted, i used a Noctua fan as its supossed to be the best.