Anycubic Vyper Filament Sensor Holder (PTFE-Input)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.17 – €1.43 net (excluding VAT)
For file: vyper-filamentsensor_0.2mm_PETG_MINI_1h33m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.30 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1.55 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A new holder for the filament sensor of the Anycubic Vyper, allowing to feed the filament with in incoming Bowden-Tube.
- Rating
- 4.667 / 5
- Likes
- 44
- Downloads
- 404
- Makes
- 3
- Views
- 3,245
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Public Domain
You want to feed your Vyper with filament through a bowden tube? With this new filament holder design, you can stick a bowden tube into the filament sensor input and feed your filament from a distance.
Replaces the old tiny metal bracket. You need a new, longer M3 screw (12mm instead of 10mm). Screw the new holder in first, then insert the filament sensor. While inserting, hold the short bowden tube of the extruder on the right place of the output if the sensor, it will stay at the perfect place when completely inserted. Then insert a 4mm PTFE tube to the inlet, it will stay there perfectly.
Print tips:
- Can be printed with PLA, but I recommend PETG, especially when you use the printer in an enclosure for better heat stability
- Print upright with support