Anycubic Vyper Filament Sensor Holder (PTFE-Input)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A new holder for the filament sensor of the Anycubic Vyper, allowing to feed the filament with in incoming Bowden-Tube.
- Ocena
- 4,667 / 5
- Polubienia
- 44
- Pobrania
- 401
- Wydruki
- 3
- Wyświetlenia
- 3239
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
You want to feed your Vyper with filament through a bowden tube? With this new filament holder design, you can stick a bowden tube into the filament sensor input and feed your filament from a distance.
Replaces the old tiny metal bracket. You need a new, longer M3 screw (12mm instead of 10mm). Screw the new holder in first, then insert the filament sensor. While inserting, hold the short bowden tube of the extruder on the right place of the output if the sensor, it will stay at the perfect place when completely inserted. Then insert a 4mm PTFE tube to the inlet, it will stay there perfectly.
Print tips:
- Can be printed with PLA, but I recommend PETG, especially when you use the printer in an enclosure for better heat stability
- Print upright with support