1 / 4
REMIX - Anycubic Vyper - Adapter for V6 E3D v.1.0 upgrade — image 1
1 / 4

REMIX - Anycubic Vyper - Adapter for V6 E3D v.1.0 upgrade

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Überarbeiteter Adapter for V6 E3D

Rating
5 / 5
Likes
67
Downloads
1,397
Makes
5
Views
6,648
Reviews
5

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

DEUTSCH:

Anycubic Vyper - Adapter for V6 E3D v.1.0 upgrade

Genervt vom ewigem Nacharbeiten des Adapters von RyanMaverick, habe ich den Adapter nochmal nachgearbeitet und den unnötigen Steg herausgenommen.
Nun passt der Adapter ziemlich gut (auf jeden fall bei mir) und die lsangwidrige nacharbeit fällt weg. Es kann sein das sie die Löcher mit einem 3 mm
Bohrer nachboren müssen um die Schrauben locker durchzubekommen.

Verwenden Sie M3-Muttern ist es möglich, die Komponenten richtig zusammen und alle auf der Druckerhalterung festzuziehen. Ein Kragen hilft, den PTFE-Schlauch in der richtigen Position zu halten.

Zur Montage werden M3 Schrauben und M3 Muttern benötigt.

Remix: https://www.thingiverse.com/thing:5020211

 

ENGLISCH:

Anycubic Vyper - Adapter for V6 E3D v.1.0 upgrade

Annoyed by the eternal reworking of the adapter from RyanMaverick, I reworked the adapter again and took out the unnecessary bridge.
Now the adapter fits pretty well (definitely with me) and the lsangwidrige rework is omitted. It may be that they fill the holes with a 3 mm
Drills have to be added to get the screws loose.

Using M3 nuts, it is possible to properly tighten the components together and all on the printer holder. A collar helps to keep the PTFE hose in the right position.

M3 screws and M3 nuts are required for assembly.

Remix: https://www.thingiverse.com/thing:5020211

Tags