Counting matching models…
A simple v6 cooler. Can hold a can in each “cylinder” and one in the ice chamber. Plenty of space in the middle for sandwiches, and about 7lbs of ice. I designed a V8 version for my dad but it could only use narrow cans to fit on my…
Information Original mod M3x18 x4 for holder halterung M3x5x4 x6 heat insert nut M3x12 x4 40mm fan M3x10 x2 solo duct Mantis mod M3x18 x4 for holder halterung M3x5x4 x10 heat insert nut M3x12 x4 40mm fan Other part M3x12 x4 3010fan 6x3mm…
LCD screen and buttons cover for Leica M10 series cameras - V6 version Improvements over V5 model mount plate is completely covering base plate of Leica camera, providing extra protection but also more comfortable grip LCD cover plate has…
This is a set of parts you need to complete the Lenco Wheel V6 build. Please not that this was designed to work in combination with laser cut aluminum parts (instead of billet CNC to reduce cost). The front box is designed to fit a 250a…
See the original model for a full description.
The Shark filament dry box system has been through many iterations, and is finally at a a stage I'd say is “finished”. It's named because of the shark fin shaped filament guide that makes it possible to load filament easily. The main…
Hi this is a remix from https://www.thingiverse.com/thing:2769783/ by thed0ct0r. Added a backplate for a Anet A8 or AM8. Added sensor holder for an 18mm capacitve or inductiveproximitysensor. Added the 40mm fan adapter from…
(v6), (v6+), and (v6e+) models now available to choose from! This simple card holder takes 5 minutes to print (on my P1S), and uses just 1.6 grams of filament! It's a perfect “last meter” print that comes in handy more than you think. To…
Most 5015 part coolers are for a specific printer's carriage. This one simply piggybacks on the 30mm fan of an E3Dv6. In the second picture above, you will see 2 of these printed with the exact same settings. One with this installed and…
Working V6 engine , engine block from @Prusa research, pistons, crankshaft and stand made by me. I made it actually work , can work with a electric motor. or any other motor that can be attached to the crankshaft. The model can also be…
The original part has been modified: https://github.com/chirpy2605/voron/blob/main/V0/Dragon_Burner/STLs/v0.2/Orbiter_v1.5/Hotend_Mounts/V6_Mount_Back.stl So now you can use a V6 Hotend with a Orbiter v1.5 Extruder. No other part mods are…
I made these for the contest but I ended up enjoying it a good amount so Enjoy!
That bright LED on my Honeywell HEV615WC humidifier was driving me crazy at night. So, I designed this simple light-blocker. Works like a charm! Dark-colored filament is your friend for this project.
see as well: https://www.thingiverse.com/thing:7099082 Print Settings Rafts: No Supports: No Resolution: 0.14 - 0.28 Infill: 45% Filament material: ABS (ASA should work as well, PLA might get too warm, it's quite near the heatblock…)…
i have seen a couple of different approaches to an engine can holder and wanted to give it a go. so here is my design UPDATED: it now has a file for cylinders without, the coolant look holes and it can shave about 3 hours of printtime off…
What? A Bike handlebar alignment tool that doesn't require hardware or tools or lasers - just hook it on the handlebars and go! The tool aligns on the handlebars and rests on the headtube. Slots in the gauge are sized for a variety of…
I recently purchased a GPS for my nikon camera, and it did not come with the strap mount, so I designed my own.
4/19/2026 UPDATE: Replaced all files for updates with a single 3mf. My original model was simply a non-working display and I had fun developing it.…
EN: These are two 3D laser scans of a Panasonic ES-LV67 shaver using the Creality Sermoon S1 and Shining 3D Einstar Rockit 3D scanners. The scan on the left (green) is from the Sermoon S1 and the one on the right (orange) is from the…
Parameters of note in the f3d file include: Holder depth - 2 inch by default (for 100 filters). Wall angle - 40 degrees for Melitta, 45 for V60. Holder top width - Width of the holder at the top, 6 inches by default. Adjusting these…
Stronger locking system, better tolerances for Bambu Lab X1C (printed with PLA-CF). EDIT 18/12/2025: Tighter collar Print Settings Printer Brand: Bambu Lab Printer: Bambu X1C Rafts: No Supports: Yes Filament: Bambu Lab PLA-CF Black…
use flat countersunk head M6*30mm x2 To attach the case to the pedal and hex socket head cap screw M5*30mm x2 To pcb
This project is a fully functional V6 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-2-3-4-5-6, Fully printable timing chain, Can be…
Every mount for SV06 Plus that I've found was for the original 23.5mm nozzle. As I've switched long time ago to the shorter V6 type volcano nozzle (21mm), the Eddy probe was sitting too low. Decided to remix Chinchill's design, as it…
To use this negative hold, place your (clean, dust free) 4x5 negative in the recess and place the holder in the front left-hand corner of the scanner bed, make settings as you would for any negative of that kind and scan the first half,…
RC CAR PRINTED JLB X HSP TRUGGY 1:8 4WS 4WD (4 WHEEL STEERING X CENTRAL DIFF) Ultra-high-performance 1/8 scale RC car, 3D printable, using standard JLB CHEETAH J3 parts. The design is improved, and much more durable than the original.…
An improved version of the base provided with the original model. The base features a raised platform compared to the original, which allows the crankshaft to be hand-turned, without the need to use a motor. (i printed a 4.8mm diameter…
DESCRIPTION: Brackets for 3DGENCE ONE printer to get rid of the original hotend and swap it with regular v6 if you've got enough of the original expensive parts, which are not available anyway, and you cant even clean the nozzle without…
This model was a replacement part made to use on Dyson V6 vaccuum. It can fit either into the main vacuum handle or through the extended stick, measured around 100mm. It engages into the same grey clip as the original adaptor and fits snug
3010 fan mount modeled after the OEM 2510 mount. Modified to suit my needs and providing the step if you need to customize for your printer. Use two 2.5x12mm screws to install the fan in the mount (will not protrude through the face if…
Use TPU filament at 100% infill density and normal supports (no tree). Lay the outside surface down on the plate. Mirror the part in slicer for the other side. As always, I recommend to use the .step file over the .stl file if possible.…
A simple holder for E3D V6 nozzles with a twist lock lid. Holds up to 10 nozzles. Labeled slots for two each of 0.2 (or 0.25), 0.4, 0.6 and 0.8 nozzles. Twist lock works with a 45° turn. Design Fusion 360 design, partially parametric for…
Imported the Glock insert to Fusion360 and made 1mm shims inside to take up slack on Glock19 mag.
I recommend a PETG print with 50% infill. I experienced warping with less due to the heat.
3 heights of Tilt Feet to angle the keyboard. Its like a vertikal mouse but for keyboards. Your fingers wont hurt while gaming. The image are the 24mm ones :)
Some times the lids to the ERA cups can be a pain to remove. I am working on this model to help open those lids.
2003 to 2007 Honda Accord V6 Radiator bushings. Printed in TPU
PETG is sufficient for the heat during brewing and worked here for a few weeks before I got a new decanter. There are already other adapters on Printables for this problem, but I found them too complex and wanted a simpler and more sturdy…
This is a NozzleCam adapter designed for the XOL toolhead and a V6 hotend. It is compatible with the OV5640 camera module and ensures precise alignment and secure mounting. The cable connecting the camera to the module must be ~70 mm in…
THIS IS A PROTOTYPE, CHANGES ARE COMING SOON. This uses the same Mounting block, Duct and Duct Backing as the original model available here . Changes include: Rounded edges for better strength with lower infill/walls for lower weight.…
this is a quick hack job of a remix to add ecas to the blinky encoder with the v623zz bearings so it can be used as a standalone encoder. this isn't tested alignment may be off.
For single Avatar VTX Antenna and RC Reciever such as ELRS module with antenna. mounts at the rear, slides over pillars
A mount for an Alonefire SV62 Mini 3W UV Flashlight. A hole is provided for a 1/4"-20 Threaded Insert to mount to a tripod. The insert is made for Wood Furniture and is not heat-set. The flashlight can be found at: https://a.co/d/08zIDRHi…
Double‑outlet fan duct for a modified E3D v6 hotend (titan extruder) Filament: PETG or ABS Supports: No Raft: No Resolution: 0.2 Important: set variable layer heights so that the air outlets print correctly P.S. Be aware: the model has…
Summary These solid motor‑block bricks are designed to snap onto Duplo-elements, giving young builders the visual feel of engines and machines. Their one‑piece construction makes them safe, sturdy, and ideal for imaginative play without…
Sometimes you just want more coffee. This is why I got myself a second, larger V60. Life became perfect, until I got annoyed by having two stacks of filters in the cupboard. This holder solved this unbearable problem for me; it might help…
Scope Throw Lever with a 42mm inner diameter. Loosely inspired from https://www.printables.com/model/507645-clamp-on-throw-lever-for-athlon-btr-gn2-scope but these don't fit my scope, so I completely design it by my own. The knurling and…
Benötigt/reqired: 6x V6_miniatur-Pleuel 6x V6_miniatur-kolbe 1x V6_miniatur-alle_zylinder 1x V6_miniatur-Kurbelwelle 1x V6_miniatur-ölwanne
A basic model that fits snugly into the cavity right before the cupholder. The height allows the model to lock itself under the lip of the cavity and not wobble. The model has 3 pockets, one of which holds the key fob, the middle one…
While replacing the leaking radiator in my neighbors Mustang I inadvertently dropped the lower radiator bushing in my coolant catch bucket without realizing it. When I went to reinstall the radiator and couldn't find it I didn't freak…
Anycubic I3 mega S Spacers for e3d V6 Volcano whitout threaded hole for bowden
print at 15-30% infill! organic supports are best!
This modification to the V60 Walnut Series Pour Over Coffee Set helps fix the issue where the glass top is not naturally centered and can slide arount on the metal frame. In addition to this the hole made for the silicone insert makes it…
Holds Post cards. 15% + 30% infill with organic supports is best!
GPS mount for HGLRC M100-5883 + Source One V6 Print in TPU. Use 0.2 mm layer height, 30% infill, tree supports ON, build plate only OFF, remove small overhangs OFF.
Stand for holding a V60 pour-over coffee filter for ups that are too big or small to hold it by themselves. Made for my friend Anders, who likes pour overs and coffee a lot. Fusion file included, in case you want to modify it.
This is a V6 add-on kit for the 1:16 Toyota Tacoma RC and 1:16 Truck/Crawler Flexible Rolling Chassis models. When the chassis moves, the pistons pump up and down automatically. Required Hardware & RC Products 4x M2x6mm screws 4x M2x16mm…
A simple sliding box to protect my V60 coffee filter (small size 01). Uses a compliant button to lock into place. Print with PETG, no additional pins or screws required.
Remixed the Rapido hotend base to fit the TZ V6 2.0.
My submission to the Cooler Master design competition. Inspired by their really cool V series I have to thank @EngGraph_1996047 for providing a .STEP file for the unmodified external cover . Thanks a lot for you help man ! The idea is to…
Slight modification to use a cable chain Category: 3D Printer Parts
I hate heat inserts ;-) This is a remix of https://www.printables.com/model/360900-revosix-hotend-mount to be assembled with hex nuts instead of heat inserts. Please give your kudos to…
A few US owners have hacked their RWD Kia EV6 and Hyundai Ioniq 5 frunks by replacing the small OEM compartment with a roomier Harbor Freight Bauer Modular Toolbox. The Bauer nameplate on this toolbox can be popped out with a screwdriver,…
Redesign this part ( https://www.thingiverse.com/thing:5427275 ) from scratch so that it flush with the fan housing. Category: 3D Printer Parts
Onshape https://cad.onshape.com/documents/12d12eb3a0a151d26a80ecb3/w/2594dec54a90a87ec01d195f/e/6ec3e3031407de34d9742db3
This is a remix of two KP3S (Pro) hotends, to have better probe mounts and fit to the KP3S
My clone V6 sat to low for the fan duct to work properly, so i raised it by 2mm in PrusaSlicer, the distance can be changed by adjusting the Y position of part4hotend as shown in the picture.
A remix of cudderbup's design over on Thingiverse. I've uploaded different versions / heights to find the best focus for you scanner. I'm using the 0.6 mm Version with ANR glass on top of the negatives. To use it without the ANR glass, a…
Express your style with the magic of 3D printing with these Barbie logo keychains. This keychain is designed by us with barbie silhouette. HowToPrint: Recommended layer height: 0,2mm Support: No Number of Walls: 2 Filling: 40% - 100 % for…
Fortnite keychain for lovers of this game. Express your style with the magic of 3D printing with these Fortnite logo keychains. This keychain is designed by us with barbie silhouette. HowToPrint: Recommended layer height: 0,2mm Support:…
If you are using browning or both types of mags go with 6.5. (Ruger & Browning) If only Ruger and Rail go with 6.4. (Pocket Version) If you also want to use box for loose ammo go with 6.3. 2026.02.10 Ruger &!! Browning Buckmark 22 LR…
BTT EDDY Mount Hero me 7.4 for hotend TZ-V6-2.0 I public step files if somone want adapt this for another hotend
This is a storage case for E3D V6 nozzles, with space for 10 nozzles and with markings for each size. Note: the 0.40 mm nozzle that ships with the MINI could be without any markings, the same as the E3D 0.25 nozzle The top and bottom snap…
Printing The cylinder head is very detailed and could cause problems on some printers. In that case please use the “simplified” version of the cylinder head. The Cylinder Head is printed with support. Beware of seams on axles and…
Ultimaker2をSherpa Mini(Sherpa Heavyでもok)を使ってdirect extruderにしました
Little tool to keep the correct spacing between the V60 characters. Indexes at the corner of the light unit.
Freely inspired by stephzic ( https://www.printables.com/fr/model/932579-sovol-sv08-bambulab-hotend-support ) and DrewDeeDoo ( https://www.printables.com/fr/model/989777-sv08-upgrade ) but neither have the correct height for my bambulab…
BETA The printhead brackets supplied at Github allows for pressure fit around the neck. However there is a tiny bit of wiggle in this mount but the Aliexpress version also allows for removal of the neck to expose M2.5 bolt holes. These…
The Revision This is the first edition of my V60 size 02 filter box, designed for everyday use. It’s simple and functional, and prints well with regular PLA settings, though other materials work too. The Backstory I made this box because…
The adapter is used to work with the original non-HEPA Filter Cap. As seen in the pictures you need to cut off the end of the cap at the beginning of the venting slots. After this you need to glue in the adapter. Since the adapter is NOT…
Este adaptador , esta configurado para acoplar en el v6 , acompañado de el extrusor directo de doble drive, bmg. Es la manera que he encotrado de adpatarlo y que no colisionase con nada en el recorrido.
I decided to take the .step files and piece out all the components for the V6. The lens cone is specifically for the Fujinon SWD 75mm f5.6 lens. You will need to print a different lens cone if you do not have that exact lens.
The adapter has a female ID of 32,5mm to 31,5mm over 25mm. I've printed it in dasfilament PETG with the 32mm ID down and the Dyson male on the top.
This is a remix from volly case for the Esp Ebus 6.1 from danielkucera https://github.com/danielkucera/esp-arduino-ebus main differences: closed the usb-c port. centered the connector.
I suggest using a material resistant to higher temperatures, so you can safely put away the nozzles freshly removed from the printer. I printed mine out of abs.
Mount for E3D V6 and clones Requires: E6 style heatsink clip fan 2 M3x20 bolts 2 M3 hex nut (For BLtouch mount) 2 M3x20 bolts 2 M3 square nuts (hex may fit) Donate Category: 3D Printer Parts
ORIGINAL (Thingiverse) Carriage for V6 hotends with bowden or direct drive orbiter extruder. Requires 2 4010 blowers 1 3010 axial fan 2 M3x20 bolts 2 M3 hex nuts Category: 3D Printer Parts
Redlizard k1 V6 Dragon Hotend (Heat Insert) for the EVA 3 carriage system
I needed the stealthburner to fit volcano size nozzle and filametrix.
A new breakthrough in remote holding technology, this new variant has everything and more. If your remotes are within 50x30mm or 1.97x1.18in or if you use any Xbox style controller, they will fit snugly in this remote holder. These…
![[Prototype] Ender 3 HGX Lite + E3D V6 Hotend (Left Handed BL-Touch)](https://media.printables.com/media/prints/a8a270bc-d305-4301-b13c-5376aba7b77a/images/12153253_0ff9b50c-6493-4912-a845-67fd088c62b3_653196b7-0567-4203-841a-12eb23c0b722/untitled_2026-feb-25_12-12-47am-000_customizedview13984586055.png)
