Propeller protection for underwater drone Fifish V6 and V6S
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.60 – €1.95 net (excluding VAT)
For file: 6x Thruster_grating_fwd_FINAL_0.3mm_PETG_MK3S_1h49m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.77 excluding VAT (range midpoint).
- Weight reported by the author
- 23 g
- Print time reported by the author
- 1.81 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Low profile alternative to the original grating supplied by QYSEA. One size fits all 6 thrusters on the Fifish V6/V6S.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 346
- Makes
- 0
- Views
- 3,003
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
I made these as I could not find any openly available models.
This is a low profile/low drag alternative to the original Qysea Fifish Propeller protector.
Example pictures show prints made in draft mode (0.3mm layer height) for rapid prototyping. For best result, I suggest using variable layer height on the aft grating, where you can use a smaller layer height for the dome part.
Unlike the original part, these are one size fits all. The fwd grating on the horizontal thrusters are gently pushed in place and no additional actions are needed to secure it. The fwd grating on the vertical need one small zip-tie around the main support member. See the included assembly instruction for more detailed information.