Search results: thruster

Counting matching models…

Printables

Dummy 13 thrusters attachment

Just print the shin with the thruster attachment. Enjoy!

Printables

RC Tugboat with Functional Azimuth Thrusters

A fully 3D printed RC harbour tug with a working azimuth stern drive. The two pods rotate 360°, giving it the same rudderless maneuverability as a real ASD tug — spinning on the spot, crabbing sideways, and full thrust in any direction.…

Order a print of this model

Printables

Retro Thrusters RT2 - Sci-fi space buggy rover toy - no supports

Mini toy sci-fi spaceship inspired by, and somewhat in the style of the Astro Mini's space exploration themed mini toy series, produced by Bruder in West Germany in the 1980's. Features include opening gull wing doors with a small load…

Order a print of this model

Printables

Retro Thrusters RT2b - Sci-fi space shuttle rover toy - no supports

Mini toy sci-fi spaceship inspired by, and somewhat in the style of the Astro Mini's space exploration themed mini toy series, produced by Bruder in West Germany in the 1980's. This model is identical to my previous RT2 buggy, but the…

Order a print of this model

Printables

Retro Thrusters RT3 - Sci-fi spaceship toy - no supports

Mini toy sci-fi spaceship inspired by, and somewhat in the style of the Astro Mini's space exploration themed mini toy series, produced by Bruder in West Germany in the 1980's. This spaceship features three swivelling turbofans, as well…

Order a print of this model

Printables

Retro Thrusters RT4 - Sci-fi spaceship toy - no supports

Mini toy sci-fi spaceship inspired by, and somewhat in the style of the Astro Mini's space exploration themed mini toy series, produced by Bruder in West Germany in the 1980's. This spaceship features shuttle style opening doors and a…

Order a print of this model

Printables

Retro Thrusters RT5 - Sci-fi spaceship toy - no supports

Mini toy sci-fi spaceship inspired by, and somewhat in the style of the Astro Mini's space exploration themed mini toy series, produced by Bruder in West Germany in the 1980's. This spaceship features two rear foldaway landing legs, two…

Order a print of this model

Printables

Bowthruster control panel

Bowthruster control panel So the standard panel sidepower bowthrusters come with are not very weather resistant. The one in the photo lasted for around 8 years but is now completly shot. A new panel from Sleipner ‘only’ costs $350…

Order a print of this model

Printables

T200 Thruster Shrouds (MATE Legal)

UPDATED MODEL: https://www.printables.com/model/1329279-t200-thruster-shrouds-v2 Most thruster shroud models for the T200 thrusters have gaps exceeding the 12.5mm limit set by MATE for their ROV competition. These thruster shrouds are…

Order a print of this model

Printables

T200 Thruster Shrouds V2 (MATE Legal)

An update from our previous model - these thruster shrouds are designed around a cleaner and more compact design, while still maintaining MATE ROV compatibility. Used by the Allan Hancock College UROV team “Deep Sea Dogs” for the 2025…

Order a print of this model

Printables

Electric Thruster Fin for Paddle Board (SUP)

Summary: Have you ever thought of attaching a Motor to your inflatable Stand Up Paddle Board? I have but I don’t like the ones you can buy, so I made this: This Stand Up Paddle Fin is designed for the Apisqueen U92 underwater thruster…

Order a print of this model

Printables

SUB - DualThruster

folgt.. motoren 3750 esc 2x 30A mit wasserkühlung 1 kanal handsender (aliex…….) akku , was in den bug reinpasst :)

Order a print of this model

Printables

Sidepower bowthruster weather protection cover

Sidepower Bow Thruster Protective Cover These Side-Power bow thruster units are built for marine environments, but the exposed control heads and connectors can still suffer from prolonged water exposure and UV damage. Surprisingly, they…

Order a print of this model

Printables

Dummy 13 thrusters attachment

Just print the shin with the thruster attachment. Enjoy!

Order a print of this model

Printables

RC Tugboat with Functional Azimuth Thrusters

Order a print of this model

Printables

RD-4 Thruster Nozzle Apollo Programm

Just a big portion of the R-4D RCS Thruster used in the Apollo Programm! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.20 Infill: 15% Filament: Basic Filament PLA Silver Notes: Printing with…

Order a print of this model

Printables

Coke Bottle ROV Thruster Mount

First part of my DIY ROV project

Order a print of this model

Printables

Oscillation Overthruster : Buckaroo Banzai

Order a print of this model

Printables

Electric Thruster Fin for Paddle Board (SUP) - ApisQueen U92 Pro (V2)

Just a modification of @Christian_114659 great Design. Now the new Version of the Thruster fits.

Order a print of this model

Printables

bigger thrusters

in the works 30mmx30mmx7mm fams used Category: Hobby

Order a print of this model

Printables

🌊 Finger Surfboard 🏄‍♀️ Single Fin, Thruster and No Fin

I made my own air surfboards in Fusion for surfing the wind out of a car window. They can also be used as decorations, perfect for hanging from the rearview mirror of your VW Transporter or bug. you can also play with them in the bath :)…

Order a print of this model

Printables

MATE Compatible ROV Kort Nozzle for Bilge Pump Thruster

This is a MATE Compatible version of my ROV Kort Nozzle for Bilge Pump Thruster w/Integrated Mount. The New Rules for 2018 state.. (courtesy of MATE) 3.2.5 PropellersNew in 2018!!! *MECH -006: Propellers must be shrouded and have thruster…

Order a print of this model

Printables

ROV Kort Nozzle for Bilge Pump Thruster

This is a Kort Nozzle for a homemade ROV thruster made from a Mayfair 750 GPH Bilge Pump. Adding this kort nozzle to the thruster will increase the output thrust by about a full pound. This nozzle was specifically design to work with a 3…

Order a print of this model

Printables

ROV Kort Nozzle for Bilge Pump Thruster w/Integrated Mount.

This is a Kort Nozzle with integrated mount for a homemade ROV thruster made from a Mayfair 750 GPH Bilge Pump. Adding this kort nozzle to the thruster will increase the output thrust by about a full pound. This nozzle was specifically…

Order a print of this model

Printables

Thruster Fin

EDIT : Please see V2 of this fin: https://www.printables.com/de/model/364077-thruster-fin-v2 Printed in PLA with 5 perimeters, 0.2 layer height and 20% infill.

Order a print of this model

Printables

Fish Commander Thruster

This model is for your Fish Commander to fly in their mech suits.

Order a print of this model

Printables

LEVITATING SpaceX Starship Lamp With NeoPixel Flame Effects and LED Thrusters

Print and build your own levitating Space X Starship lamp! The entirety of this build can be found on my YouTube video where I walk you through the process step by step... typing it all out here would take forever. You can also find all…

Order a print of this model

Printables

Reinforced Blue Robotics Thruster mount

The Blue Robotics T-100 and T-200 ROV thrusters ( http://www.bluerobotics.com/ ) are brilliant, but they suffer from one major issue. The mounts they come with are not strong enough to ensure that the thruster does not separate from the…

Order a print of this model

Printables

Intake Guards for Blue Robotics T100 and T200 ROV Thrusters

This is a weed guard for use with Blue Robotics T100 and T200 thrusters. The front unit mounts under the stock nosecone. You will need two 10mm M3 stainless cap head bolts to mount this, the stock bolts are not long enough. The rear guard…

Order a print of this model

Printables

Reinforced Blue Robotics Thruster Mount for 4" curved pipe hulls

This Edition of my reinforced ROV mount for the Blue Robotics T100 and T200 thruster was created for use with 4" diameter pipe hulls, as seen on the SV Seeker ROV. You'll want to print it flat side down. As always, Design files are…

Order a print of this model

Printables

Reinforced Easy Print Front Intake Guards for Blue Robotics T100 and T200 thrusters

This is an update of my printable Blue Robotics Thruster intake guards for use with the T100 and T200 thrusters. The origional guard offers slightly less drag, but is weaker and more difficult to print. These guards are strong, can be…

Order a print of this model

Printables

Skeg fin for Deflecting Debris around a hull mounted Bluerobotics T100 or T200 Thruster

This is a 4.5mm thick flat skeg designed to sweep debris around a Blue robotics T100 or T200 thruster. it is made for use with a flat bottom hull. There is area on the bottom of the mount for caulking around the through bolts, though you…

Order a print of this model

Printables

Thruster Fin v2

The upper part can now be printed horizontally and is therefore much more robust. Print in PLA/ABS with 6 perimeters, 0.2 layer height and 20% infill.

Order a print of this model

Printables

BlueROV2 Heavy Thruster Guards

This HDPE thruster guard is used on the BlueROV2 Heavy configuration to protect the vertical thrusters and to prevent them from snagging on the tether, weeds, or ropes. *Please note: 3D print does not include the following: 8 x Heavy…

Order a print of this model

Printables

Easy print Thruster for windsurf/surf

I wanted to try some thrusters out on my free ride board but didn't want to spend the $40 to buy a set so printed my own for way less. Cut the main shape out of 1.5mm stainless, ground the trailing and leading edge and contact cemented it…

Order a print of this model

Printables

Thruster Mount

There are cylindrical watertight enclosures with an outer diameter of 4.5inch available from the company Blue Robotics https://bluerobotics.com/ for building AUV's (autonomous unterwater vehicle) or ROV's (remotely operated vehicle).…

Order a print of this model

Printables

B2BThrustersAndJets

NOTE: I couldn't get Cura to recognize the “holes” in the STL no matter what I tried. I put it in Lychee Slicer and NO PROBLEMS. I would recommend Lychee Slicer for the STL to print them.

Order a print of this model

Printables

Frame for boat thruster joystisk control (Sleipner/Sidepower)

Example printed in ABS.

Order a print of this model

Printables

Toroidal Propeller for ThrustMe Kicker / Cruiser / Thruster

Replacement propeller for ThrustMe Kicker and ThrustMe Cruiser. Potentially can fit ThrustMe Thruster. Features: Go faster, go farther — toroidal props are much more efficient than conventional ones More quiet — even less noise from your…

Order a print of this model

Printables

Ionic Thruster

Watch this video for more information:

Order a print of this model

Printables

Thrusterspeed SSV

The speed will amaze you when you see this vehiclemin real life. This car is 2nd to none when it comes to speed. have fun with and show to your friends. thx :)

Order a print of this model

Printables

Apiary thruster adapter for Queen ship

Very important Apiary upgrade that allows you to add LEGO fires to the thrusters at the back of the Queen ship

Order a print of this model

Printables

T200 Thruster Guards

Thruster Guard: A Southern Ocean Subsea Creation Enhanced Durability: Designed specifically for the BlueRobotics T200 Thruster . Protection: Offers a robust shield against unpredictable underwater elements. Performance-Oriented: Carefully…

Order a print of this model

Printables

Tactile Switch Cap for Vetus Radio Control Bow Thruster

Print with fine settings

Order a print of this model

Printables

Spiral Flame Thruster

It is an abstract sculpture using a simple spiral shape but resulting in an elegant design. It could be an artistic design, a trophy, an award, or a shelf ornament. This model was NOT created with any use of AI. There are two versions,…

Order a print of this model

Printables

MATE Underwater Robot Thruster Guard

This Thruster Guard for small bilge pumps.

Order a print of this model

Printables

Dummy 13 MS Gundam Barbatos (Chest Upper, Chest Lower and Thrusters)

Now we have more Barbatos armors, wait for more. Barbatos D-13 will be real. D-13 = Dummy 13

Order a print of this model

Printables

Mini Ionic Thruster

This project is an Ionic thruster I designed a while ago. It uses a 30KV converter from aliexpress, a 6mm copper tube, piece of aluminium can and a couple of needles. It provides noticable thrust but definitely not enough to power…

Order a print of this model

Printables

Retro Thrusters RT1 - Sci-fi spaceship toy - no supports

Mini toy sci-fi spaceship in the style of the Astro Mini's space exploration themed mini toy series, produced by Bruder in West Germany in the 1980's. Great for those looking for a non-franchised and non-weaponised space exploration…

Order a print of this model

Printables

Rocket Thruster Nozzle - Model

Rocket Thruster Nozzle designed for use on the Dragon’s Rest spacecraft I am building at 150% scale. It takes about a week of printing on two Prusa printers 24X7 to build this ship. The rocket thruster nozzle doesn’t take very long to…

Order a print of this model

Printables

Retro Thrusters RT2 - Sci-fi space buggy rover toy - no supports

Order a print of this model

Printables

Stelton To Go click - thruster

Since it easily brakes and I did not find it as spare part (would render cup to become garbage) on their homepage I created a new thruster. When you clean and dissamble mug lid mechanism and reassamble it again, it will easily brake if…

Order a print of this model

Printables

Retro Thrusters RT2b - Sci-fi space shuttle rover toy - no supports

Order a print of this model

Printables

Cutlass Black with rotating thrusters

Print with supports, I used .12 layer size for better detail. I only printed a palm sized one, but it should scale up fine as needed. This is v1, I plan on making the turret rotate next, then adding opening doors.

Order a print of this model

Printables

Retro Thrusters RT3 - Sci-fi spaceship toy - no supports

Mini toy sci-fi spaceship inspired by, and somewhat in the style of the Astro Mini's space exploration themed mini toy series, produced by Bruder in West Germany in the 1980's. This spaceship features three swivelling turbofans, as well…

Order a print of this model

Printables

Retro Thrusters RT4 - Sci-fi spaceship toy - no supports

Mini toy sci-fi spaceship inspired by, and somewhat in the style of the Astro Mini's space exploration themed mini toy series, produced by Bruder in West Germany in the 1980's. This spaceship features shuttle style opening doors and a…

Order a print of this model

Printables

Drake Cutter with rotating thrusters

Print with supports and I used .12 layer height for better detail

Order a print of this model

Printables

Retro Thrusters RT5 - Sci-fi spaceship toy - no supports

Mini toy sci-fi spaceship inspired by, and somewhat in the style of the Astro Mini's space exploration themed mini toy series, produced by Bruder in West Germany in the 1980's. This spaceship features two rear foldaway landing legs, two…

Order a print of this model

Printables

Retro Thrusters RT6 - Sci-fi space buggy rover toy - no supports

Mini toy sci-fi spaceship inspired by, and somewhat in the style of the Astro Mini's space exploration themed mini toy series, produced by Bruder in West Germany in the 1980's. Features a lift up hatch with a small load cargo area, four…

Order a print of this model

Printables

Retro Thrusters RT7 - Sci-fi spaceship toy - no supports

Order a print of this model

Printables

Ionic thruster part 1

hybrid model of an ionic thruster. Foundation to build ion propulsion from model.

Order a print of this model