ROV Kort Nozzle for Bilge Pump Thruster
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Kort Nozzle for a homemade ROV thruster made from a Mayfair 750 GPH Bilge Pump. Adding this kort nozzle to…
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 112
- Makes
- 1
- Views
- 1,171
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This is a Kort Nozzle for a homemade ROV thruster made from a Mayfair 750 GPH Bilge Pump.
Adding this kort nozzle to the thruster will increase the output thrust by about a full pound. This nozzle was specifically design to work with a 3 blade 50mm Robbe Boat propeller using an adapter with these specs.
This was a prototype and the nozzle arms are a little weak so I have since made a new version. that incorporates a mount into the nozzle. This version works for upgrading existing thrusters so I thought I'd share it too.
This nozzle was specifically design to work with a 3 blade 50mm Robbe Boat propeller using an adapter with these specs.
Print Settings
Printer Brand:
MakerGear
Printer:
M2
Rafts:
No
Supports:
Yes
Resolution:
.20
Infill:
100%
Notes:
STL prints as positioned with minimal supports. Even printed at 100% this will probably not be waterproof so keep that in mind when it comes to your Rov's buoyancy.
Custom Section
The kort nozzle/thruster combo was designed to be mounted using a 1 1/2 conduit clamp.
The conduit strap is mounted to the Rov frame using a #12 stainless steel flat head screws. Using a flat head screw allows the mount to self center to the mounting hole.
It can be mounted to a flat or round surface, (PVC frame in this case) the area around the nozzle must remain open though for proper flow.
Category: Robotics