BMG/V6/Volcano 5015 fan duct for Artillery Genius / Sidewinder X1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of https://www.thingiverse.com/thing:4584743 for use with 5015 cooling fan. Haven't actually printed this yet!
- Rating
- 5 / 5
- Likes
- 44
- Downloads
- 486
- Makes
- 1
- Views
- 3,970
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
Remix of https://www.thingiverse.com/thing:4584743 for use with 5015 cooling fan.
Haven't actually printed this yet! Print at 0.2mm layer height or below for best overhangs.
EDIT 2020-12-12: The first version of this duct was completely broken on account of my CAD model of the 5015 fan being mirrored. >_<
I've remade it with the correct orientation, and overall improved the design. Model includes built-in support; make sure to orient it so that the support brim is on the build plate! Should print without any additional support.
EDIT 2020-12-14: I made up a version for use with a Volcano hotend as well. Double check when you slice the STL -- the Volcano version has "VOLCANO" stamped in the side of the fan support rib.
EDIT 2020-12-19: So it turns out my CAD model of the fan wasthoroughly rotten. Got a better one and redesigned -- hopefully this one will work!
Print instructions
Category: 3D Printer Parts Summary
Remix of https://www.thingiverse.com/thing:4584743 for use with 5015 cooling fan.
Haven't actually printed this yet! Print at 0.2mm layer height or below for best overhangs.
EDIT 2020-12-12: The first version of this duct was completely broken on account of my CAD model of the 5015 fan being mirrored. >_<
I've remade it with the correct orientation, and overall improved the design. Model includes built-in support; make sure to orient it so that the support brim is on the build plate! Should print without any additional support.
EDIT 2020-12-14: I made up a version for use with a Volcano hotend as well. Double check when you slice the STL -- the Volcano version has "VOLCANO" stamped in the side of the fan support rib.
EDIT 2020-12-19: So it turns out my CAD model of the fan wasthoroughly rotten. Got a better one and redesigned -- hopefully this one will work!