1 / 8
BMG/V6/Volcano 5015 fan duct for Artillery Genius / Sidewinder X1 — zdjęcie 1
1 / 8

BMG/V6/Volcano 5015 fan duct for Artillery Genius / Sidewinder X1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of https://www.thingiverse.com/thing:4584743 for use with 5015 cooling fan. Haven't actually printed this yet!

Ocena
5 / 5
Polubienia
44
Pobrania
486
Wydruki
1
Wyświetlenia
3956
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Remix of https://www.thingiverse.com/thing:4584743 for use with 5015 cooling fan.

Haven't actually printed this yet! Print at 0.2mm layer height or below for best overhangs.

EDIT 2020-12-12: The first version of this duct was completely broken on account of my CAD model of the 5015 fan being mirrored. >_<

I've remade it with the correct orientation, and overall improved the design. Model includes built-in support; make sure to orient it so that the support brim is on the build plate! Should print without any additional support.

EDIT 2020-12-14: I made up a version for use with a Volcano hotend as well. Double check when you slice the STL -- the Volcano version has "VOLCANO" stamped in the side of the fan support rib.

EDIT 2020-12-19: So it turns out my CAD model of the fan wasthoroughly rotten. Got a better one and redesigned -- hopefully this one will work!

Print instructions

Category: 3D Printer Parts Summary

Remix of https://www.thingiverse.com/thing:4584743 for use with 5015 cooling fan.

Haven't actually printed this yet! Print at 0.2mm layer height or below for best overhangs.

EDIT 2020-12-12: The first version of this duct was completely broken on account of my CAD model of the 5015 fan being mirrored. >_<

I've remade it with the correct orientation, and overall improved the design. Model includes built-in support; make sure to orient it so that the support brim is on the build plate! Should print without any additional support.

EDIT 2020-12-14: I made up a version for use with a Volcano hotend as well. Double check when you slice the STL -- the Volcano version has "VOLCANO" stamped in the side of the fan support rib.

EDIT 2020-12-19: So it turns out my CAD model of the fan wasthoroughly rotten. Got a better one and redesigned -- hopefully this one will work!

Tagi