Darts Mission Torus 100 light support for GranBoard Pole support
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.87 – €5.96 net (excluding VAT)
For file: Dart_Light_Support_0.2mm_PLA_MK3S_5h58m_19g.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.42 excluding VAT (range midpoint).
- Weight reported by the author
- 56 g
- Print time reported by the author
- 5.98 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple support to hold the Mission Torus 100 darts light when using it with a GranBoard attached to their pole support
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 75
- Makes
- 0
- Views
- 3,156
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple support made to assemble those items easily:
Mission Torus 100 (https://www.missiondarts.com/dartboards-c84/dartboard-lighting-c109/mission-torus-100-folding-portable-travel-light-p1668)
Gran Pole support (https://gran-darts.com/en/collections/stand/products/pole-darts-stand)
You will need to print 3 parts:
-Torus_Arm
-Pole_Grip_Back
-Pole_Grip_Front
There are 4 versions available for you to choose from:
48mm version => Intended to grip the bottom part of the grandboard pole.
42mm version => Intended to grip the top part of the grandboard pole. (probably the one you need)
35mm version => Intended to grip onto a 35mm pole as requested in the comments. :)
32mm version => Intended to grip onto a 32mm pole as requested as well
Standard settings should do perfect in this printing orientation:
You will also need a little bit of hardware:
Support assembly
-2x M5x40 screws with 9mm diameter head max (a bit longer is ok)
-2x M5 nuts (8mm across)
Like this one as an example:
The nuts are locked by the hex slot built in the part, simply place back and front parts around the pole and tighten lightly. There will still be a gap between the parts, this is intended for it to grip correctly.
Then slide the arm in the front part, and the Torus 100 in the arm.
The parts slides easily and are not tight. This is intended to be able to remove the arm and light if you need to remove the dartboard. The end of the arm is bringing the light down for optimal lightning of the board and is slightly angled up to ensure there is no risk of falling.
It's in use here since years without any issue.
Step file included as well for easy remixing.
The arm is in the Darts_Light_Support file, and the different grip sizes in 'laser' models, this is normal as I designed everything to be interchangeable.
______________________________________
Update 02/07/26 =>
-added a version for 32mm pole diameter.
-changed screw size to M5 40mm and made grip parts compatible with my other model