Counting matching models…
Update (--> for Breacher & Battle Axe) --------------------------------------------- Silly Shell with 3x airtight Elite barrels 6x Short Darts / 3x Elite Darts / 18 caliber .50 foam balls Update 30.9.2025: Modified shell, suitable for…
Update ---> alternative slim versions with smaller outer diameter --------------------------------------------------------------------- Auto Feeding Inline Clip (3x Short Darts) Optimized dart storage diameter and barrel diameter to…
This remix exists to cut down the N1 darts to a size more similar to the average short dart, i did this to try and increase the compatibility with 3d printed mags and especially with stringers like the ones from Leedle Dynamics. The darts…
This is a logo to print in White and glue on the camera cover for Darts Camera and LED Ring mount by 3DEngelen.
Die Neuauflage von B3D-Autodarts-Automatic-Score System ist nun endlich verfügbar. Automatische Darterkennung? Mit Autodarts & Co. Kein Problem. Aber wie oder was erkennt die Darts? Dafür benötigen sie zbsp. Solch ein Set, um Kameras…
Updated Version 1.1 9x Short Darts ----- Silly Shell ----- with 3x airtight barrels 9x Short Darts (3x3) or 27x caliber .50 Foam Balls + Loading Tool with 3 ramrods for fast and easy loading. I added 3 separate airtight barrels to a silly…
12x Short Darts ----- Silly Shell ----- with 3x airtight barrels 12x Short Darts (3x4) or 36x caliber .50 Foam Balls + Loading Tool with 3 ramrods for fast and easy loading. I added 3 separate airtight barrels to a silly shell for better…
Once loaded into slicer, just paint as required! No supports needed See my profile for other bar signs for your mancave!
3 February 2026 Added 10 row variant to include 'doubles', 'triples' and 'beds' or numbers down to 12. ================================================================================ I designed this scoreboard to keep track of scores in…
This is a printed follower that'll hopefully allow for dart sensing for the HC Vesper. I just took an image from the listing off of M416 Gel Blasters and based the magnet position off that and copied a follower from a Diana magazine. It…
Just some nerf dart tips :) Print settings: layer height: 0.1mm - 0.4mm line width: 0.3mm - 0.6mm wall line count: 2 - 4 top/bottom layers: 3 - 4 infill density: 5 - 30 percent infill patern: cubic filament type: PET-G (recommended),…
An Display to show of your darts and original box. It fits at least for the standard target cardbord box. Edit: More versions for Harrows, Winmau, Unicorn etc. cardbord boxes. More to follow. Maybe you have to repoke the tiny holes für…
Nachdem ich für einen Freund die Kamerahalterungen für den Target Corona Vision gemacht habe, wollte ich das Autodartserlebnis auch genießen. Da der Corana Vision an sich sehr weich ist, der LED-Streifen in den Kameras blendet und ich…
English: Bluetooth Macropad for Autodarts (12 Keys) Tired of walking back to your computer after every set? Elevate your game with this DIY 12-key Macropad , specifically designed for the Autodarts ecosystem. Key Features: True Wireless:…
This is my number ring for a dartboard in the Tor Edition. I hope you like it. Here are the dimensions: Outer diamter: 447mm Joint tolerance: 0.05mm Height of the numbers: 0.01mm Has bevels (Fasen) for easy fitting Just select the Color…
Simple darts caddy to store your darts. No MMU required. Print Order: start with WHITE swap to GREEN at layer 25 (5.0mm) swap to RED at layer 27 (5.40mm) swap to BLACK at layer 29 (5.80mm)
Case for 3 darts, use hairtie, or rubber band to secure darts inside. Fits darts up to 167mm, even with K-flex flights.
If you print them place supports like in the last photo, else the print will fail. Enjoy your Airsoft Darts
Darthalter mit personalisierbaren Text Flexible Anpassung und passen sie ihr Text für ihren Flight an. Ideal für eine Sammlung oder nur als Halterung
Kabelclip für das DIY Autodarts Set von Robbel. Ich wollte den Stecker von meinem LED Strip nicht umlöten weshalb ich mir diesen kleinen Clip erstellt habe.
I had to move my carpet and had to create a new throwing line. This is the result. material : PETG infill: 15% support: yes
This version eliminates light bleed between LED ring elements and needs minimal screws for assembly. The arms are made for bigger printer, they are combined to 1 part, so your printer requires like 350 mm in one bed dimension to fit them.…
Pinnable rings to practice dart accuracy, just like Simon Whitlock does
Used 4 these, mirror on Z axis to create right and left parts Drill holes to wall 55cm from corner, this means that 45x45x750 timber will fit tighly to between adapters.
This is a little thingme I thought would look really cool on my blasters, not to mention having 20 extra darts handy. Supports will be needed. I used PLA filament for this. Just a note: you will probably need to turn this diagonally on…
Dart light and camera mount, added an angle to the light ring and created a mounting foot to replace the magnet mount.
Print & Assembly Guide A budget-friendly, stable lighting solution for your dartboard. Designed for easy mounting and future camera integration. Print List: 8x ring.stl – Main ring segments (requires careful orientation in your slicer).…
Connect the cam to the cable! Put the Camera onto the frame. Push the frame with the camera into the arm. Close the lid.
This 3D model was created for Let’s Go Bunting Mental after I struggled to find any suitable models available online. I designed it from scratch to fill that gap and to provide something practical and visually fitting for the space. I’m…
Mit diesen Halter kann man die Kameras perfekt an die Target Corona Beleuchtung montieren. OV9732 Kameras habe ich verbaut Die anderen Dateien sind noch diverse Kabelhalter damit es vernünftig verlegt ist am Board
Replace your bad paper flights with even worse plastic ones. Might work well. The model is 0.3mm in height so keep an eye on that initial layer height. Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution:…
Wanted to do an improved version of gibbles_fx " NERF BigShock Removable Barrel (Elite Dart and Rival HIR)" I added knurling to the barrel end and also made the tolerances fit better in the blaster. Two files attached. One is default and…
keeps your dart flights nice and neat then dispense when needed mine holds upto 30 but by making the body taller and adjusting the spring accordingly you can hold more. ASSEMBLY first glue the spring-4 to the top-3 in the centre then…
Nerf shell for Nerf Trilogy. Shoots one MEGA-dart. No support necessary.
Simple stand for up to 12 darts. There are two versions included: All-in-one: Just one part printed with a material of your choice. Two part version with a bottom part printed with TPU (or any other flexible filament of your choice) and a…
This dart storage model features 9 slots for 3 sets of darts, accommodating 3 players. The drawing I've created can easily be replaced by using the original Blender file.
Foam dart stand for most of the available nerf foam darts. Assembly with adhesive is required.
The POPDARTS Board Edition came with a small drawstring bag to hold the darts which I didn't like, and there was no way to attach the bag to the board carrying bag. So designed up my own dart holder that can be attached to the carrying…
bring your dart game on a new level. With a self printed light ring. You can stick a normal LED stripe on the inside of this ring. I used this one for my build: https://amzn.eu/d/9oLgnr6 Advantage of this stripe in my opinion is the fact…
The Disk Centered Auto Rotation (DCAR) V2 Muzzle Device for foam dart blasters. This updated version of my DCAR system features the same dart stabilizing technology with additional configurations and a new mounting system. This new…
Pusher extension for the Nerf Rayven/rayvenfire. This does require a mag adapter, of which none of the dart zone/xshot adapters work (because they position the mag in the middle of the adapter instead of being farther forward). I use a…
This gridfinity bin can store multiple sets of darts. You can store just the barrels with tips, or with steams. You can also store them with flights if your flights are small enough, otherwise it can be a tight fit. Happy to upload in…
Here it is! Filament Darts. Try recycling filament for the point. Set up a cardboard box for a target and you're in business. Also works with those hole-filled plastic targets everybody seems to have. Update: New models ! Significantly…
This is a simple to use foam dart cutting jig. The main purpose of this is to cut darts in half for use with shell fed blasters, like the Battle Axe that uses Silly Shells. There are two parts: Main body: where the dart sits and provides…
Silly Shell Launcher Attachment fits the Silly SCAR thread and you can also shoot darts through it! Airtight launcher for Silly Shells for 16mm aluminium barrels. Fits all Silly Scar threaded nuts and uses also an o-ring seal to the…
Update (--> for Breacher & Battle Axe) --------------------------------------------- Silly Shell with 3x airtight Elite barrels 6x Short Darts / 3x Elite Darts / 18 caliber .50 foam balls Update 30.9.2025: Modified shell, suitable for…
This is just a dispaly box/chest for 3 darts. Unfortunately the darts aren't held in place, so they rattle around, if the box is not transported carefully. Print Settings Printer: Anycubic i3 Mega Resolution: 0.2mmm Infill: 25% Filament:…
Find other STLs in the original model If you' re searching for a case which fits a RPi and further electronics, please find this Model If you're using an 800mm x 800mm panel for mounting AND you're using the new feet which are mounted…
Adapted holder for the darts ring light (https://www.printables.com/model/686948-darts-ring-light) to be able to use a surround (Winmau). The holders have a little distance so that other surrounds can also be used.
Hier habe ich einen Halter für Darts gemacht. Einfach mit zwei Schrauben befestigen. Viel Spaß damit
This Darts Holder has been designed to store up to 12 Darts close to a Darts Board, like for example under a Table or a Surround. The file does not contain any Brandings.
Damit kann man sich ein schicken Fuß Anschlag fürs Dart Spielen machen. Die Darts Oche kann einfach auf den Boden geklebt werden und ist dadurch jederzeit abnehmbar. Habe es mit diesem Doppelseitigen Klettband befestigt : Link Amazon Per…
This is a bottleholder with the autodarts logo on it. You can screw the back part into the wall/backboard and slide in the holder. detach it by pushing it upwards. one model is with a logo slightly moved outwards and the otherone is an…
A simple storage box/stand for 80 soft darts for Nerf ULTRA blasters and the like. The darts fit with a slight tension, which allows them to be held even when upside down. From a newbie in 3D printing. Do not judge strictly (:
Trying to mimic the shower shells used for the manticore launcher. Not very good at cad so it may look terrible. Will provide step files if out wish to edit. Print nose down, can use brim and then use a de bur tool to clean up. This was…
Since I am not the best Darts player from time to time darts fligh to high and hit the wall. Even with softtips it makes not so pritty indents in the wall. So I design this wallprotector to simply protext my wall. It is printed in 3 parts…
This is a small wrench to tighten or loosen e-darts softtipps. I tested it with two noname ones, Bulls Longlife Short and E-Point tips. If you need to make changes I included the .step and .f3d. Settings: Layerhight: 0,2mm Bottomlayer: 3…
Autodarts Schablone / drilling templat Passt zu Robbel Füssen
Darts Holder – a sleek and practical stand to organize and display your darts, keeping them easily accessible and protected. Please use the *.3MF file with Bambu Studio due to the specific settings and configurations I've applied to…
Darts Holder for Fans Holds the 3 Darts with the matching Panini Card in Plastic Case behind
Dart holder for up to seven sets of darts. Outer holes are tilted away from the center hole by 10°. I did the print on a MK4S with default settings for 0.15mm layer height.
The 3D model is the digital template for a modern and space-saving wall mount for your darts. Perfect for 3D printing enthusiasts who want to present their darts in a stylish, modern, and secure way. The darts are not clipped in but are…
This AutoDarts camera mount is designed for a clean and secure installation directly onto the Winmau Plasma ring mount points. Unlike bulkier alternatives, this mount features a slim profile while still providing a stable and sturdy…
Update ---> alternative slim versions with smaller outer diameter --------------------------------------------------------------------- Auto Feeding Inline Clip (3x Short Darts) Optimized dart storage diameter and barrel diameter to…
It is a dart holder made by me, which is fixed to the wall with two screws of 2,5mm diameter. It is designed to store only three darts. Material: PLA Nozzle Temperature: 220°C Bed Temperature: 60°C Layer Height: 0.2 mm Print Speed: 250…
This remix exists to cut down the N1 darts to a size more similar to the average short dart, i did this to try and increase the compatibility with 3d printed mags and especially with stringers like the ones from Leedle Dynamics. The darts…
This is a logo to print in White and glue on the camera cover for Darts Camera and LED Ring mount by 3DEngelen.
einfach stylisch nur mit der SVG von einer Dartscheibe im Slicer zusammengebaut kann sich denke ich sehen lassen den Kork für drunter ist hier zu finden, damit ist der Untersetzer auch rutschsicher 60 Stück Untersetzer Kork Trägerblätter,…
Hallo, ihr wollt die Druckdateien von Viperman3 nutzen und auch eine Grundplatte für euer System verwenden? Kein Problem, dann druckt einfach die Füße von mir und verwendet diese dann mit den anderen Dateien von Viperman3. Meine Füße…
This is an adapter to use this holder which was modified for the Winmau ring also with a “Target Darts Corona” ring. This requires a different holder but can be combined with these very stable feet. I print it in ASA and PLA is the same…
This case stores the following: Raspberry Pi 5 PSU ( Essager 67W GaN USB Typ C, Link ) Here I opened it partially to expose the mains wire USB PD Converter ( Link ) 2x USB-C to USB-C 10cm ( Link ) C8 Main Voltage adapter ( Link ) Barrel…
(Designed this a year ago, I kinda forgot about it lol) Adds +3 capacity, to a total of 13 darts Knurling for extra grippers Slim
Um eine besonders glatte Oberfläche zu drucken, habe ich es mit der Schrift nach unten zeigend gedruckt. Es besitzt ein Loch mit einem Durchmesser von 4mm. Das Schild ist durch seine Ähnlichkeit zu einem Warnschild aus dem Straßenverkehr…
Small minimalistic Dartsholder. Print up-side-down. No supports. Proven model. Use PLA - ABS - TPU or PETG. After printing, heat the darts with a hair dryer or lighter and push them neatly into the desired depth in the openings. Leave…
Minimalistic Dartsholders. Can be texted. Print up-side-down- No supports. PLA, TPU, PETG, ABS of FLEX your choise
These shells are specifically made for the Yeeeeethammer , and more specifically the full length K25 version. They also work incredibly well with the Anemone . In the search for a silly shell the Yeeeeethammer can't shoot, I made these,…
Přidělání pomocí špendlíku s kulatou hlavou. Pin with round head. Print: Layer 0,2 Infill 15%
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Best printed in TPU with 3 walls, no support needed.
Holding 9 darts and 12 flights Print PLA 10% infill no suport needed
Here's a simple holder I designed to hold two pieces of Red Dragon Darts Finger Grip Wax to my wall. I just stuck it on with some double sided tape and now I can quickly pull out a piece of wax for a game of darts. Print Settings Layer…
These are Penrose kite and dart tiles that fit together with hidden side snaps to enforce matching rules and to hold the tiles together into a liftable layout. When assembled, only the polygons show both top and bottom. The big challenge…
English: It is designed to be compatible with various cameras. Simply use some zip ties or glue to secure them in place. I created the arm in two parts because my print bed is too small, and I used screws to join them together. The wall…
Die Neuauflage von B3D-Autodarts-Automatic-Score System ist nun endlich verfügbar. Automatische Darterkennung? Mit Autodarts & Co. Kein Problem. Aber wie oder was erkennt die Darts? Dafür benötigen sie zbsp. Solch ein Set, um Kameras…
English: I needed to move the whole thing out of the way, so I designed a simple shoe-like mount for the arms. In the arm file there is also a hole for the cables. Deutsch: Ich habe es so designed, dass man das ganze sehr einfach…
Meine Dartscheibe muss mit einem individuellen Halter aufgehangen werden, sodass sie auf die Holzpanele passt.
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Throw your soft darts like a ninja! Just insert 8 soft darts…
Darts Holders Simple 3 darts holder Last Resort Flights - they are'nt perfect but if you have nothing else :P Real Darts flights here https://www.prusaprinters.org/prints/127821-real-darts-flights-glue-needed This is a remix: The base of…
This model works great at least when the darts are printed at 120mm long. We printed it on a prusa xl and it was really fun to just see how high we could chuck them and see them stab into the ground almost every time
