1 / 5
Autodarts OV9732 Camera Mount for Winmau Plasma Light — image 1
1 / 5

Autodarts OV9732 Camera Mount for Winmau Plasma Light

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Based on the camera placement of the arm on Autodarts, redesigned for better strength and print quality.

Rating
0 / 5
Likes
3
Downloads
100
Makes
0
Views
377
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This camera arm refers to the camera mounting position of the arm on Autodarts, with a redesigned shape for better strength and 3D print quality. Please make sure to print the arm vertically with supports.

  • The lid is friction-fitted into the arm. Due to varying material shrinkage rates, you might need to scale the lid slightly to ensure a proper fit.

  • The OV9732 is fixed with four M2 screws, while the arm is mounted to the Winmau Plasma Light bracket with two M4 screws.

  • Note that the original Winmau Plasma Light screws are too short, so you will need longer ones.

這個支架參考了Autodarts官網上支架的鏡頭安裝位置,重新設計了外形來獲取更好的強度與3D列印品質,請確保垂直列印支架並且開啟支撐。

  • 蓋子是透過摩擦力緊配固定到手臂上。由於不同材料的收縮率不同,可能需要稍微縮放蓋子的尺寸,以確保蓋子合適的鬆緊度。

  • OV9732 是用四個 M2 螺絲固定,而手臂則是用兩個 M4 螺絲安裝到 Winmau Plasma Light 的支架上。

  • Winmau Plasma Light 原廠附的螺絲太短了,所以需要自備更長一點的M4螺絲。

Tags