1 / 5
Autodarts OV9732 Camera Mount for Winmau Plasma Light — zdjęcie 1
1 / 5

Autodarts OV9732 Camera Mount for Winmau Plasma Light

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Based on the camera placement of the arm on Autodarts, redesigned for better strength and print quality.

Ocena
0 / 5
Polubienia
3
Pobrania
100
Wydruki
0
Wyświetlenia
377
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Indoor Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This camera arm refers to the camera mounting position of the arm on Autodarts, with a redesigned shape for better strength and 3D print quality. Please make sure to print the arm vertically with supports.

  • The lid is friction-fitted into the arm. Due to varying material shrinkage rates, you might need to scale the lid slightly to ensure a proper fit.

  • The OV9732 is fixed with four M2 screws, while the arm is mounted to the Winmau Plasma Light bracket with two M4 screws.

  • Note that the original Winmau Plasma Light screws are too short, so you will need longer ones.

這個支架參考了Autodarts官網上支架的鏡頭安裝位置,重新設計了外形來獲取更好的強度與3D列印品質,請確保垂直列印支架並且開啟支撐。

  • 蓋子是透過摩擦力緊配固定到手臂上。由於不同材料的收縮率不同,可能需要稍微縮放蓋子的尺寸,以確保蓋子合適的鬆緊度。

  • OV9732 是用四個 M2 螺絲固定,而手臂則是用兩個 M4 螺絲安裝到 Winmau Plasma Light 的支架上。

  • Winmau Plasma Light 原廠附的螺絲太短了,所以需要自備更長一點的M4螺絲。

Tagi