Dart Trophy / Pokal / Cup / Trophäe / Darts (easy print)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dart Pokal / Dart Cup with winmau sniper V3 Dart / Pls Read the Print settings
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 121
- Makes
- 0
- Views
- 731
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is my own designed dart pokal with a winmau sniper v3 Dart. I have printed the whole setup on a Bambu Lab A1.
If you enjoy the setup I would kindly ask you to upload a picture of your setup with a small feedback and rate the setup.
⬇⬇⬇ Print settings and dimensions below ⬇⬇⬇
If anything doesnt fit or you have a problem with something, you can write a comment or text me a private message :)
If you want a whole camera setup as me check this out:
If you want the same NUMBER RING as me check this out:
Dimensions of the whole cup:
Height: 227mm
Width from base: 167mm
Print settings:
I would recommend try using the .3mf because its already in color. Just print the Base and the dart board in your normal settings wich you prefer. For the barrel, flight and tip REDUCE THE PRINT SPEED like in the pictures attached !!!