1 / 8
Dart Trophy / Pokal / Cup / Trophäe / Darts (easy print) — zdjęcie 1
1 / 8

Dart Trophy / Pokal / Cup / Trophäe / Darts (easy print)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dart Pokal / Dart Cup with winmau sniper V3 Dart / Pls Read the Print settings

Ocena
0 / 5
Polubienia
21
Pobrania
121
Wydruki
0
Wyświetlenia
731
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

This is my own designed dart pokal with a winmau sniper v3 Dart. I have printed the whole setup on a Bambu Lab A1. 

If you enjoy the setup I would kindly ask you to upload a picture of your setup with a small feedback and rate the setup. 

⬇⬇⬇ Print settings and dimensions below ⬇⬇⬇

If anything doesnt fit or you have a problem with something, you can write a comment or text me a private message :) 

If you want a whole camera setup as me check this out:

If you want the same NUMBER RING as me check this out:

Dimensions of the whole cup:

  • Height: 227mm

  • Width from base: 167mm

Print settings:

I would recommend try using the .3mf because its already in color. Just print the Base and the dart board in your normal settings wich you prefer. For the barrel, flight and tip REDUCE THE PRINT SPEED like in the pictures attached !!!

Tagi