Darts Winmau Laser Oche 8510 support for GranBoard Pole support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple support to hold the Winmau Oche Laser darts laser when using it with a GranBoard attached to their pole support
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 197
- Makes
- 1
- Views
- 2,444
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial
This is a simple support made to assemble those items easily:
Winmau Laser Oche 8510 - renamed x0120 (https://winmau.com/products/winmau-laser-oche-x0120)

Gran Pole support like this one:

You will need to print 3 parts:
-Support_Laser
-Pole_Grip_Back
-Pole_Grip_Front
There are 4 versions available for you to choose from:
48mm version => Intended to grip the bottom part of the grandboard pole.
42mm version => Intended to grip the top part of the grandboard pole.
35mm version => Intended to grip onto a 35mm pole as requested in the comments. :)
32mm version => Intended to grip onto a 32mm pole as requested as well
Standard settings should do perfect in this printing orientation:

You will also need a little bit of hardware:
Support assembly
-2x M5x40 screws with 9mm diameter head max (a bit longer is ok)
-2x M5 nuts (8mm across)
Like this one as an example:

The nuts are locked by the hex slot built in the part, simply place back and front parts around the pole and tighten lightly. There will still be a gap between the parts, this is intended for it to grip correctly.
Laser mounting
-2x M4x16 screws (best with chamfered head to follow the laser design but not mandatory)
-2x M4 nuts
Attach the laser to the support and simply slide the laser support in the front part.
The support slides easily and are not tight. This is intended to be able to remove the laser quickly. If you really do not one it to move you could glue it and set it once. But in my use case I needed a quick removal.
Step file included as well for easy remixing.
______________________________________
Update 02/07/26 =>
-added a version for 32mm pole diameter.
-changed screw size to M5 40mm and made grip parts compatible with my other model
Update 31/08/25 =>
-added a version for 35mm pole diameter.
-added a version for 42mm pole diameter.
-reduced the tolerance of the original model for thighter fitment