1 / 8
iFlight Nazgul Eco Dual Antenna and GPS Mount — image 1
1 / 8

iFlight Nazgul Eco Dual Antenna and GPS Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A mount for Nazgul Eco that tholds original XT60 at a better angle, 2 SMA connectors, a Walsknail GPS and RX T antena.

Rating
5 / 5
Likes
6
Downloads
101
Makes
0
Views
427
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

The stock tailpiece for the iFlight Nazgul Eco frame had an angled XT60 connector, which made it impossible to position LiPos with short wires properly. This set has original XT60 and SMA connectors in better positions and has space for a Walksnail M181 GPS and T antenna. It should fit any other frame with 10 mm OD, 30 mm high standoffs and 25 mm between them.

Print with supports in the material of your choice. Resolder the wires so that they are perpendicular to the XT60 connector. Insert the XT60 first, followed by the SMAs and the GPS. There is a bit of a tight fit inside, so some force may be required to insert the connectors.

Version that uses standard XT60 connector (glued in) is also aviable, in case you trash original one.

Check out my other FPV related things for more cool things. Happy printing and safe flying!

Tags