Counting matching models…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
This is actually a re-mix of www.thingiverse.com/thing:3200739. However I couldn't use the URL in the description
This is an Mount for a GoPro Hero 8/9 suited for the Iflight XL5 Frame like the Nazgul 5 and the XL7, DC5/7. I printed it without support with a resolution of 0,2mm. You might need to drill the holes for the mounting screws to a bigger…
Tried to make this as true to the original as possible. This fits a Nazgul5 v2 perfectly. Print with no supports in the original orientation I have provided. For a full set, print two of the left and two of the right. I highly suggest…
Created by Rene Skøtt, this simple but beautiful mount was created to stand abuse from the freestyle life. The design is well thought, giving extra support to those parts that tend to break apart. iFlight tends to have kind of a standard…
The Lord of the Rings - Nazgul on Horse
nazgul xl5 mount crossfire buzzer gps PS. Mogę wydrukować i wysłać na terenie Polski.
I designed this adapter since I wasn't satisfied with the online available ones. I am using a Nazgul5 V2 with its XL5 V5 frame and an ExpressLRS 2.4GHz T-Antenna by HappyModel. To get the antenna into the printed part you might have to…
Los Nazgûl son un grupo de nueve espectros al servicio del Señor Oscuro que aparecen en la novela de El Señor de los Anillos escrita por J.R.R. Tolkien . También son llamados Espectros del Anillo y Ulairi . Just Scale and Print, use Tinny…
Nazgul - Le Seigneur des Anneaux Base de travail généré par IA. Retravaillé sur Nomad Sculpt. Images tirées de la visionneuse 3D : https://www.printables.com/model/1699621-3d-viewer-visionneuse-3d-android-ios-windows-linux Autres liens :…
A replacement Go Pro Mount base for the **new** NAZGUL XL5 ECO frame. Reinforced around the bolt where it could split! The new frame used on the nazgul eco is still called the XL5 but does not fit the old go pro mounts, meaning you have…
Replacement arm protector for iFlight's Nazgul Evoque F5 (V2) Print in TPU No supports required
GEP-M1025Q Gps mount for iFlight Nazgul Eco Might fit other gps units and quads Printed in 95a tpu 10% concentric infill. If to tight of a fit over size a couple percent or so.
Here's a temporary replacement arm for a Nazgul 5 drone, It works OK while you are waiting for a real replacement, doesn't survive crashes though, so print a few if you're as poor a drone pilot as me! Print instructions PLA 60% infill -…
High base for Nazguls miniatures of War of the Ring 2nd edition board game. Base is remixed from dadeq90 ( https://www.thingiverse.com/thing:3505073 ), stand is addon. Nazgul base is oval, not round , so watch out when fitting miniatures!…
Printed mine out of Rosa3D CarbonLook PETG. 0.2mm layer height, upside down with snug supports on the build plate.
Side plates for the iFlight Nazgul V5. Provides a bit more protection to the electronics without adding much weight. Provides a port to easily insert a magnetic USB cable such as this one:…
Standoff spacing is 21mm. Standoff height is 28mm if your frame is not the nazgul and you want to match it. This mount was meant to reduce vibrations caused by the antenna, so I printed mine with PETG. It is very stiff and doesn't flex,…
A mount for the camera of the DJI 04 Air Unit Pro. I recommend to use TPU filament. I haven't tried to print the model in PLA, but feel free to try it out and see if it works. Let me know if it works! I also made a Holder for the antennas…
Print orientation ~45deg as shown in image. There are multiple version with 2 variables wall (H)height and (R)diameter show as red lines in image. Default is H=5.2mm. Diameter 3.2mm for PLA and 2.8mm for TPU print Most vanilla TPU print…
Holder for GPS, VTX Antennas (in my case DJI O3, but others with SMA adapters also work) and a fixed XT-60 for easy plug in of the battery. Print the main part in TPU and two spacers in a rigid material like PETG or PLA. The advantage of…
This is a dual antenna mount for the Walksnail Avatar HD system with two antennas. There's a version without support and a version with longer antenna sleeves which require support. Have fun! Print Settings Printer: Self built Rafts: No…
Since I was unhappy with the original GPS mount produced from Iflight because it broke my UART port of my GPS module, I designed this model. The main advantage in comparison to the original version is that the UART-Port is supported by…
This is a rear mount for both a BN220 GPS unit & a TBS crossfire immortal antenna to fit the iFlight XL5V5 frame (Drones such as the Nazgul5). Unlike others out there, this doesn't replace any of the existing parts. The rear frame bars…
Made a new mount for a cheaper M10 GPS from TBS for the iFlight Nazgul Evouqe F5. Print Settings: TPU 5 walls 35% Infill 5mm brim for stability Print like shown on the picture
This is a remix. Changed it so that it fits in front of the Nazgul V4 and V5. Fits every other 6mm standoff. Dimensions from hole to hole are 24.5mm. It also fits in the back if you squished the arms together. I found out after printing…
2xFrame and one of each TPU parts is needed. The mount uses the stock bolts (M3x6 top and bottom, M3x10 for the front bar).
Print with TPU as the model does need to bend to fit. Does not need supports. Set 0 bottom layers to make the infill visible to make fancy patterns.
mount for 18mm gps modules
Tpu parts to mount gopro camera, Iflight FC07704 gps module and tbs immortal t antenna. Printed in prima easyprint tpu 95A. with 0.6mm nozzle, 0.3 layerheight. 230 degrees c nozzle. 50 degrees c bed. 40% grid infill. Assembly parts. 2x…
The stock tailpiece for the iFlight Nazgul Eco frame had an angled XT60 connector, which made it impossible to position LiPos with short wires properly. This set has original XT60 and SMA connectors in better positions and has space for a…
A CRSF + FlyFishRC M10 mini GPS holder for the iFlight Nazgul Evoque frame based on my base GPS holder and DJIBryan 's excellent holders for other GPS units .
Mount for BLITZ M10 GPS V2 for iFlight Nazgul Evoque F5X iFlight FPV M8Q-5883-GPS Module V2.0 Mount
A mount for the antennas of the DJI 04 Air Unit Pro. I recommend using TPU filament. I haven't tried to print the model in PLA, but feel free to try it out and see if it works. Let me know if it works! I also made a Holder for the camera…
I made this because sometimes after a crash the prop will bend towards the motor cables. I've got the dimensions down to the point where it should be completely glue-less, it simply clips on the arm and holds. Happy Flying!
I wanted to update my iFlight Nazgul Eco 5 DC with a DJI O4 Pro system, so I have no need for the camera mount up front anymore. I tried to find free STLs of any modification like that, but found only paid options. So I just made my own!…
Die Nazgul 5v3 (analoge Version) hat hinten unter der Antenne bereits (wie ich vermute) eine Befestigungsmöglichkeit für das optional erhältliche GPS-Modul. Ich habe allerdings das Foxeer M10Q 250 GPS Q5883 Compass Module separat gekauft…
GPS is hold by 2 tabs from the sides, it requires quite a lot of force to snap it in or out Version 2: Made it simpler to print and bowden printer by making print path more continuous It's more rigid GPS mount a bit tighter Print Settings…
This is a mount for the DJI Action 2 camera on the iFlight Nazgul5 v3. It provides a good amount of protection and fits the DJI Action 2 camera with magnetic ND filters like in the picture. In my case the ND filters are from Neewer but it…
Armguard for iFlight Nazgul5 V2 fits nearly perfect for my Nazgul5 V2 Print Settings Printer: Sidewinder x1 Rafts: No **Supports:** Yes Resolution: 0.2 layer hight **Infill:** 20 Filament: Geeetech TPU Category: 3D Printer Parts
I didn't find the back part of the Nazgul Evoque properly 3D modeled on the internet for additional GPS module, so I designed an almost exact replica of the part where the XT60 and the video antenna are and extended it for the HGLRC M100…
just a small remix of the original file provided by iflight, just made the walls a bit wider.
I upgraded my VTX on my Nazgul5 and the cable for the antenna was a few mm too short. So I designed a shorter mount for the antenna. I relocated the R/C antennas, too. Have fun. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts:…
This is an electronics housing for the iFlight Nazgul5 v3. It helps protecting the electronics and provides a cleaner look. Also it feels better when grabbing the drone by hand and gives a more polished overall experience. The holes are…
Made small shark fin for iFlight Nazgul evoque v2. It replaces gopro mount, and also serves as a battery stop. I printed it in TPU 95A, but any fillament would do.
Nazgul Evoque Single VTX Antenna Mount Remix of iFlight Support's stock antenna mount. Changed dual-antenna mount to single VTX antenna mount Compatible with DJI O3 Air Unit Zip-tie hole to mount it securely Still supports ELRS antenna +…
These side panels encapsulate the stack in the middle and the rear end where the VTX ist installed in the bind'n'fly Nazgul XL5 Eco without removing any preinstalled components (besides the top plate to access the central standoffs). The…
Higher pitch XT60 to accommodate batteries with average cable length. Rest is the same as the stock backed.
Voici un meeple utilisable pour le jeu de plateau Le Destin de la communauté (The Fate of the Fellowship).
This adapter was created to mount the XT60 connector at 90° instead of 45°. My batteries (SMC HCL RS and Tattu v6 ST) have very short cables and would just barely reach to the connector. I included a small pocket for the balance plug. It…
I love the SL5 frame and this a nice way to fit the airunit into the small frame. I remixed the design a butchered a nother antennamount and crossfire aswell. Category: 3D Printing
The iFlight baby Nazgul (both 63 and 73) has a very aggressive camera angle, around 40 degree. I designed a lower angle for this drone which should be closer to 25 degree. It fit both drones.
A mount for the runcam nano 3 to fit the baby nazgul frame from iflight
Custom Stealth GPS Mount for iFlight Nazgul F5 V3 (TBS M10Q Ready) Take your iFlight Nazgul F5 V3 to the next level with this custom-engineered GPS mount. Specifically designed for the TBS M10Q GPS (25 x 25 x 7.7mm), this mount combines…
This is a remix. Changed the antenna placement for the Happymodel ELRS T-style antenna because the antenna comes really close to the props and chances are high that the props will suck the antenna in. I also removed some stuff that are…
Aileron de protection de batterie dorsale allégé par des trous dans afin de lui donner aussi un design sympa :)
Redesigned ALL TPU parts to minimize weight. ADDED ELRS HappyModel EP2 RX Mount - Need tree supports - 2 Versions ELRS MOUNT replaces the Rear Antenna & Pigtail holder Fits both the 63mm and 73mm versions Cover pic - Red is 63mm, Blue is…
It is endpiece for Nazgul5 V2 with XT60 plug. It will allow you to plug your battery directly to your drone without worrying about props cutting your cable. Use some form of TPU that is little bit more stiff and rigid. Other materials can…
print on: NYLON or TPU
Frame arm for Nazgul5 drone, temporary replacement
This is the cable cover for Nazgul 5 and another 5 inch drones
Presenting you super light and simple Insta 360 Go 2 mount for iFlight 1S Baby Nazgul Nano. This combo actually flies and is reliable. Not sure about flight time thou. I tried to print it with 0.4 nozzle at the beginning but as the part…
Had issues with the antenna wires getting caught in the props and didn't want to spend a few days waiting for covers. This print is modeled to fit the back of the nazgul perfectly. Choose if you want the wide or narrow model, print, heat…
Simple and fast to print motor cable protection for your iFlight Nazgul5 V2
Print it on its side with supports. TPU 25% infill 3-4 walls 0.8/1mm top/bottom thickness Avoid crossing perimeters clear props are barely visible in the bottom when slowing down and using superview fov
Has been printed in PETG, but should work well with PLA as well. 3 mm holes for countersink screws.
Armguard for iFlight Nazgul5 No supports required Design V2 lighter version Category: Vehicles
Butchered GP Mount for most iFlight 5inch 25deg Category: 3D Printing
Nazgul Bust - Shadow of Mordor
Printing: TPU 10% infill Layers: 0.2 or whatever you want. Paint supports onto the antenna sleeves Usage: There's two parts. The small part is on the bottom, and larger part on top. You can either thread the antenna cables through the…
Smaller side panel/camera mount replacement for the iFlight Nazgul Evoque F5. The stock side panels crack very easily, but this is very durable if printed in TPU. This also improves airflow to the electronics. The third photo is the stock…
Model made from: original GPS Mount stl available here: https://iflightrc.freshdesk.com/support/solutions/articles/48001238224-nazgul5-v3 "FlyFishRC M10 Mini GPS Reference Model and Reference GPS Holder" available here:…
I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…
Top Mount for GPS IFLIGHT M10 MINI V2 on a NAZGUL EVOQUE F5 V2 with a protection for 6S LiPo (1550 Tattu R-Line here)
Hello :) This is best mount that i build in long time. Holds Gopro perfect. But need long strap. I use HQProp 20x300 and its holding mi gopro perfect. :) Print Settings Printer Brand: Creality Printer: Ender 3 Pro (Direct drive) Rafts: No…
This taller GoPro mount lets you tilt the GoPro more without hitting the battery and allows a lower angle since it's further from the props Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: Any TPU Notes: 10…
What it is Parts and accessories for the iFlight Nazgul5 V2. No extra hardware needed. Included parts Left Foot and Right Foot Front Bumper and Rear Bumper RX Antenna Mount. This also works on any FPV quad with posts 20 mm apart. VTX…
Printed in TPU95A. I used 50% infill(grid). 0.2 layer height. 0.4mm nozzle. Cable from gps is abit tight to get into the channel for it, but it was more important to prevent too much flex.
- Print with TPU. Without support. - GPS max size: 20x20mm
I need to back a litle my camera to keep it from crash and need do rework litle that front plate what holds camera.
I'm a pretty bad FPV pilot. As shown by the fact my poor Nazgul 5 (V1) looks like a lawn mower. I've made this little stopper to help hold the battery in place during crashes because mine kept sliding forward enough to pull the connector…
Nazgul 5 & XL5 V4 Frame GoPro mount. If you wish the actual GoPro case you can find it here https://www.thingiverse.com/thing:5539236 Category: Sport & Outdoors
Lord of the rings Nazgul start to white after 7 layer, change to dark grey after 14, start to black
These side plates are designed for my iFlight Nazgul Eco DC 5" FPV drone to protect the electronics from debris while providing easy access to the FC's USB port and the VTX's SD card slot. At the front, there is a space for the Vifly GPS…
For the iFlight Nazgul XL5 ECO Features: GPS mount for HGLRC M100 GPS ELRS antenna guides Dual SMA mounting bulkheads Vertical XT60 mount I printed mine in TPU with supports only on bridging areas.
Everything but the body shell is printed in tpu, body shell I printed in petg you can use whatever you want. some tolerances are pretty tight on some of the parts so you might have to fight to get some of them to fit. I'll get the body…
Print in TPU.
An alternative to the minis found in the Lord of the Rings Fate of the Fellowship game. Print 9 Nazgul meepls Print one sheet of the "stickers" Glue to each side of a meeple. Spray with matte finish clear spray. Enjoy.
printed in TPU Category: R/C Vehicles
This is a customized mount for iflight nazgul and cidoras based off the illinsnap v2 mount by illinvillainfpv. its is a
A remix of the Hook/Mount (strohbi) made, needed to remix it to fit my evoque. My infill settings were 100% since it's such a small print.
This is a mount for the DJI Action 2 camera on the iFlight Nazgul5 v3. It provides a good amount of protection and fits the DJI Action 2 camera with magnetic ND filters like in the picture. In my case the ND filters are from Neewer but it…
This is a GoPro session (4/5), RunCam Orange 5 or Caddx Orca mount out of TPU for IFlight Nazgul. This is remix from https://www.thingiverse.com/thing:3103320 - correct hole spacing added Print Settings Printer Brand: Creality Printer:…
You can strap your gopro vertically or horizontally. Print with TPU, 3 perimeters, 25% infill. Fits the Hero 10 without any protection nicely and also fits Gopro Hero 5/6/7 if you dont mid a little bit of movement or fits perfectly with…
