1 / 7
XT60 adapter for iFlight Nazgul XL5
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounts the XT60 connector at 90° instead of 45° for better compatability with batteries with short cables.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 58
- Makes
- 1
- Views
- 214
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This adapter was created to mount the XT60 connector at 90° instead of 45°. My batteries (SMC HCL RS and Tattu v6 ST) have very short cables and would just barely reach to the connector.
I included a small pocket for the balance plug. It is a bit loose but much better than having the balance plug dangling around mid flight.
Additionally required parts:
- 2 screws M3x16
- 2 screws M2x12
- 4 washers M2
- 2 nuts M2
You need to disassamble and cut away the original mount for this, unfortunately.