Counting matching models…
Inspired by https://www.printables.com/model/88-spacex-landing-pad by https://www.printables.com/@Cipis Printing instructions Final perforated look is created only by slicing settings. Inner part is without bottom and top solid layers and…
Just needed it for a cosplay, might as well post on here.
This drone frame was created using the generative design feature in Fusion 360, which helps find shapes that are both lightweight and strong. Instead of designing everything by hand, the software suggests an optimized structure—resulting…
This is my first draft at making a standalone XT Lock, however it's based on a design I've been using built-in on a drone for 6 months without a single unplug, so I'm quite confident about the locking part. Requires an XT60-H connector…
I wanted wider contact points to feel more like my DJI controller. I also added texture to the tips to make it feel more like my DJI controller. The initial design height felt too tall for my hands so I made them in three different…
Printing Time-Lapse Video ^^ Link here You can find more keychains in this collection Ready print Profiles for Bambu Printers on MakerWorld, link Below:…
This battery strap mounted floaty was created for a GEPRC Cinelog 30 v3 but may fit other drones too! It's been tested with up to 350grams of weight. Required Materials: A 2" diameter x 6" long styrofoam cylinder -…
This is a set of clips that let you mount Firehouse Technology 2-LED strobes to your DJI Phantom drone. Works with P4, P4A, P4P, P4P+, and possibly others in the Phantom series. There are 2 different clips, 1 for side facing and 1 for…
Print your own Tiny Whoop Gates! I hope this serves you well and feel free to give me any feedback or ideas for improvements. Have fun! Main loop This split into several parts (e.g. 4 or 6). These are just stuck together and hold well.…
my original antenna broke and I couldn't find one as long, so I created a holder that is in front and any antenna can be PLA/PTG/TPU 20-100% no supports
The Wraith FPV Drone This is a 4/3.5 inch drone frame. Mine is printed using carbon fiber PA6 nylon for the body and ABS for the top. I'll list out the specific electronic and mechanical hardware that I used below. This list will also…
You can find Uzi Keychain here Ready print Profiles for Bambu Printers on MakerWorld, link Below: https://makerworld.com/en/models/779491#profileId-716389 Model made based on keychain from Glitch store Enjoy! Other Uzi Keychain here Same…
You can find N Keychain here Ready print Profiles for Bambu Printers on MakerWorld, link Below: https://makerworld.com/en/models/779467#profileId-716362 In this design, you can see eyes are just a bit different color than haird, but both…
2nd Remix. Remixed the original to work with a 5" i am building, seen some remixes which added more depth but not width and the original one would just about fit the width of my frame but was too tight to rest under the arms so just added…
Inspired by https://www.printables.com/model/88-spacex-landing-pad by https://www.printables.com/@Cipis Printing instructions Final perforated look is created only by slicing settings. Inner part is without bottom and top solid layers and…
PROJET MINI PHEN X Le projet Mini Phen X (MPX) est né de l'inspiration de la célèbre KayouMini et de la JENO POCKET . L'idée derrière la MPX était de créer une version personnelle et originale de ce modèle mythique, tout en conservant son…
This model allows you to attach the printed version of the f450 drone to the wall
[English version on Github - à venir] Version actuelle : 1.1.0 (cf. changelog en bas de page) L'essentiel : Parfaite intégration de la caméra du DJI Air Unit O4 Lite Géométrie Wide-X Performances de vol excellentes, facile à tuner…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a large dronepad/helipad which measures 62cm x 62cm and is printed in 31cm wide quarters, designed to resemble a real helipad. It has feet under each section to support it so it is not flat on the ground. It is…
BD1 “Chimera” Made in Poland Chimera is 2,2" freestyle cinewhoop type drone, for 3S batteries, with fully 3D printed construction Ready-to-flight mass(with lamp, battery and wings) : <200grams Carry weight : Can fly with light action…
This battery strap mounted floaty was created for a GEPRC Cinelog 30 v3 but may fit other drones too! It's been tested with up to 350grams of weight. Required Materials: A 2" diameter x 6" long styrofoam cylinder -…
i Wanted to attach my insta 360 go3 camera to my drone but it only has a gopro naked style mount. this mount uses 1 M5 nut and the screws for the Gopro naked mount.
Check out my other Murder Drones designs → here ← Ready print Profiles for Bambu Printers on MakerWorld, link Below: https://makerworld.com/en/models/1543533-cyn-keychain-murder-drones-glitch#profileId-1620329 Consider SUPPORT MY WORK…
I needed a drone leg tall enough so my LiDAR sensor dont smash against the floor. Una simple pata para drones que permite no dañar los sensores LiDAR.
designed these so i could quickly setup and take down pool noodle style gates for practice and they work great. for stacking gates, they are designed with time, cost and durability in mind i use 2' long 1/2" rebar and in the middle i take…
A stylish drone mount for the wall, using less filament than standard mounts with just as much strength. Easy to scale for any size of drones. 3.5-7INCH in pictures Printed in a transparent Bambu PETG Category: Other
A prop holder It can be mounted on the wall or just used as a stand. I used the strength profile with Bambu PETG. Category: Other
Das GoFlyPro Frame wurde weiterentwickelt um die DJI O4 Pro und das Walksnail Moonlight Kit einzubauen. Es werden hier nur die benötigten Dateien für die GoFlyO4Pro Drohne hochgeladen. Es ist sozusagen einfach nur ein Upgrade und baut auf…
1. Le point de départ du RQ1 découle directement de l’expérience acquise avec mon précédent drone : l’Hyperion . Lors d’une session de long range dans les Alpes, notamment lors d’un déplacement du côté de Breuil-Cervinia en Italie, je me…
This is a universal FPV drone stand for frame without props guards. Printing It can be printed without support if your printer can do good overhangs. And it is direcly in the good orientation for printing. Dimensions This stand is…
This drone frame was created using the generative design feature in Fusion 360, which helps find shapes that are both lightweight and strong. Instead of designing everything by hand, the software suggests an optimized structure—resulting…
Redesign of XIAO ESP32S3 & Wio-SX1262 case to accommodate drone usage. This setup is appx 44g total printed in PETG. This will make most drones in the sub 250g category above 250g. Please follow all laws applicable to your usage. You can…
Version 1.4 — Stronger, Stiffer, More Stable (Updated from Version 1.2) 🌀 3D Flight Lab Drone Gyroscope – STL Files for DIY Printing, Testing & STEM Projects by Binary Box LLC The 3D Flight Lab Drone Gyroscope just got a major upgrade.…
Let me be clear about one thing. I like drones. And I like printing them. It drives down costs, it makes parts easily replaceable, and it enables all a whole new kind of design philosophy. So I've certainly made a good few of them myself.…
Trimmed the stand and added holes to fit m5 screws to attach to a wall. Scale 60% for flat bottom whoops using M3 screws
Version one and three are designed for single filament printers. Version two (MMU) is designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game):…
This is a part of our Black Sun Covenant Bundle ! 40% discount on STLs for all Patrons and Tribers! patreon.com/dakkadakkastore myminifactory.com/users/DakkaDakkaStore?show=tribe Try before you buy: download free models, bases and bits →…
Hier geht es um eine sehr kompakte 2,8 Zoll Drohnen Frame das spontan entstanden ist. Das Frame gibt es dann in den Größen 2,5 / 2,8 / 3 Zoll. Ich habe auch noch zwei 3,6 Zoll Version erstellt um dann auch noch meine 3,6 Zoll Drohne…
A parametric micro toothpick frame with optional prop guards. Compatible with canopies from the Parametric Whoop Canopy project. Battery is secured to frame with velcro strap. Made with OpenSCAD. This frame improves on the durability and…
don't buy the carbon rods! print this model and save money. put support and brim. print 4. this is the drone: PRINT WITH ASA OR ABS ONLY other wise it might break
Hexagonal Battery Case for 5,7,8 450mAh 550mAh Drone Batteries
(Non-included Drone Parts) This is a 3D-printable frame for a drone compatible with the following parts: - 30.5mm x 30.5mm flight controller - 4S LiPo Battery - Electronic Speed Controllers (ESCs; x4) - Brushless Motors (max. diameter of…
this upgrade adds the repair drone to optimus prime's trailer
In PLA. Print 15% infill with support on the build plate and organic supports. .20 balanced or structural. In PC Blend. Print 100% infill with support on the build plate and organic supports. .20 structural. For Shen Squirt assembly.…
The CrazybeeG473 is Happymodel's latest AIO FC for whoops. It will NOT fit on the Fractal 75 frame because the VTX antenna hits the frame. You can install it with the JST port facing down, but it will hit the battery. I designed a simple…
If you purchased the 500-X4 500mm Carbon Fiber Center Plate Quadcopter Frame Kit, you will find the included controller mounting plate doesn't fit a CubePilot controller very well. This printable fits my CubeOrangePlus and will fit other…
This model was designed to adapt the FPV drone's pods to a PS5 controller, allowing it to be used in flight simulators. This way, you can train using a standard controller while maintaining a flight experience very similar to that of a…
In PLA. Print 15% infill with support on the build plate and organic supports. .20 balanced or structural. In PC Blend. Print 100% infill with support on the build plate and organic supports. .20 structural. Note: If possible; Consider…
I got my son a drone a few years back that uses the operator's cell phone as a display. My son is too young for a phone, but he does have access to an iPad Mini. The iPad can run the app no problem, but the remote doesn't open wide enough…
3D printable base to construct the bucket targets used in the NIST Engineering Laboratory Intelligent Systems Division standard drone proficiency test, Level 1-3 Open Environment. Item Vendor Qty per Target Price per Item Total Cost…
Drone release mechanism for a small Emax ES08MD II servo. Can be mounted by straps or zip ties, using holes. The recommended servo is Emax ES08MD II. 2 mm screw can be used to further secure the cylinder on the servo. A key ring and a…
Gunner and healing drones from risk of rain 2, Tell me if there's any issues with the model and feedback would be huge I'm trying to make my models look nicer this year, feel free to give me any feedback!
I couldn't help but add some eyeballs to my BetaFPV Air75. Watching a drone fly around really makes you think it has a life of its own, and adding eyes gives it a personality. This is a very simple model that absolutely destroys the…
You can print in PLA or PETG. PETG will pass more vibrations, but resist crashes better. You will need some screws: m3: 4 x 40mm 9 x 5mm 4 x 10mm m2: 4 x 30mm (for FC) 16 x 5mm (motors) 4x 3mm (camera) This drone is designed for use with…
Removable drone Light kit for standoffs at 25mm and 32mm. Reversible mounting for +-15 degree light tilt. With one light housing for the Arris E280 drone.
I recommend printing the one file given or use supports. This model REQUIRES plastic coated wires for their stiffness. Silicone wires are to pliable and don't preform well. Install servo, turn on servo and go to max and install the gear…
You can find more keychains in this collection Ready print Profiles for Bambu Printers on MakerWorld, link Below: https://makerworld.com/en/models/1543533-cyn-keychain-murder-drones-glitch#profileId-1620329 Consider SUPPORT MY WORK…
You can find more keychains in this collection Ready print Profiles for Bambu Printers on MakerWorld, link Below: https://makerworld.com/en/models/1543533-cyn-keychain-murder-drones-glitch#profileId-1620329 Consider SUPPORT MY WORK…
Design: I have spent quite some time refining and optimizing various drone frames for my Tiny Whoop , and this is the first one I feel confident in publishing. It features a fully ducted design to both protect the propellers and to boost…
These are spare parts for the air:bit drone (wonderkit.no). Better print it in PETG, PLA sometimes breaks. I took the measures from the original wood parts.
Simple top plate antenna mounts for R9mm and Foxeer Pagoda.
Statue of Drone Pilot Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) See my other Statues here: https://www.printables.com/@StudioMechanik/collections/2993601
I've wanted to display my drone and I couldnt find any "holder" for the flywoo 85. So I've made this one. Its designed for 5cm shelf. It can hold any small drone. The drone is held by the battery holder. In the latest iteration I've added…
🔋 Ultra Lightweight 18650 2S2P / 4S Battery Holder This is a lightweight 18650 cell holder designed for high performance applications such as: • RC jets • FPV drones • Electric airplanes • Robotics • Compact high current battery packs The…
🔋 Ultra Lightweight 18650 6S Battery Holder This 6S 18650 holder was designed specifically for high performance applications where weight and rigidity matter: • RC EDF jets • Long range FPV aircraft • High voltage drone builds • Robotics…
GoPro mounting style mount for Sniper MX 3 FPV Drone Frame
Landing pad for your tinywhoops. Supportless print. Legs latch in open/closed positions. Can be printed in 3 segments to fit on the Prusa MK4. You'll then need 6 M3 screws and nuts to join the parts. The cool mesh grid can be achieved by…
Simple adapter plate to mount a Quadlock, so I can use any device with Quadlock now.
A clamp for mounting the Skydio 2 controller to this wearable desk , creating a hands-free way to manage your controller while having an accessible work surface for an iPad or checklists while flying. Posts on the clamp match the screw…
IT: In un’epoca in cui anche il cielo ha smesso di essere solo cielo, questa targa ricorda con sottile ironia che persino i gesti più quotidiani possono richiedere una certa… cautela strategica. Ispirata a dichiarazioni diventate virali,…
Overview This project is a fully 3D-printed drone designed from scratch with a focus on minimal hardware, ease of assembly, and durability. The design uses a modular approach to simplify repairs and replacements. Features & Specifications…
SPIDERMAN F.R.N.D DRONE FROM THE SPIDERMAN 2 VIDEOGAME The drone from spiderman 2 video game. Uses 15% Infill, 2 walls, i used normal pla. It would look the best if you paint it a bit, but it is cool either way. Uses about 50 grams of…
These are simple wire covers for the ImpulseRC Apex 5", should fit regular, HD and EVO models, and many of their clones. They are made to be the exatct same size as the arms, following the original curves, so they fit nicely, while…
Hey, i want to share my generative generated 4" drone frame. I designed it myself, because there was non free available that made me happy. Its not tested jet!!! Work still in progress. Its designed for Mounting: - 25.5x25.5 - 30.5x30.5…
This model i used alot of techniques on how to do it. there were alot of rough areas that required a lot of thinking and i learned many new things like using the knife topology tool and using the boolean modifier but i think this may be…
Here are some TPU feet for the Potensic Atom 2 drone to protect the landing gear. I printed it with a 0.6 nozzle with 0.24 layer hight and it works well.
I made this model as part of my Blender learning process - it is my first from-scratch project and might not have the best topology in some places. With that being said, I present to you a figurine of SD - J from the popular animated…
Print the Box with the opening facing up. You only need supports for the raised curves. Print the lid with the letters on the buildingplate and change the color if you want to make the letters stand out. Best layer height : 0,08 mm / 0,4…
