BreakMe Drone - Complete Frame Kit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Complete FPV drone frame kit
- Rating
- 0 / 5
- Likes
- 438
- Downloads
- 1,021
- Makes
- 0
- Views
- 9,970
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This is a complete fpv drone frame kit.
Update 2024/12/23 - Added ‘Bumper Foot’ which can be added under the motors. Print 4x.
Update 2025/1/18 - Someone in the comments asked which hardware fits this frame.
Here is a list of AIO flight controllers with ESC's from RotorRiot:
https://rotorriot.com/collections/stacks-new/products/goku-1-2s
https://rotorriot.com/collections/stacks-new/products/f411-1s-25x25-aio-flight-controller-with-13a-32bit-esc-am32
https://rotorriot.com/collections/stacks-new/products/kakute-g4-25x25-aio-flight-controller-with-35a-32bit-am32-esc
https://rotorriot.com/collections/stacks-new/products/goku-gn745-v3-2-6s-25x25-aio-flight-controller-with-45a-32bit-esc-am32
Print Details:
One-click gcode file for MK4S with 0.4 nozzle, 0.2mm layer SPEED profile for cheap PLA.
2 hour quick print - Trigger print from Prusa Connect!
Tested on Prusa MK4S.
Take care to print in correct orientation (insets should bridge fine, though)
Works fine in PLA - Suggest stronger materials with Carbon Fiber like PET-CF17 or similar.
PLA frame is 50grams without controller, motors etc.
Frame Spec:
Fits 25mm x 25mm flight controllers.
20mm x 20mm square for radio/gps on both upper and mid body.
19mm camera bracket fits standard cameras. Add shim for 14mm nano cameras.
Typically comes with cameras.
BOM (Bill Of Materials):
Your favorite material - Consider dimensional accuracy due to fixing points.
Requires M4 & M3 button style screws (black, because pretty)
Requires M2 button style screws for devices & Camera bracket.
https://www.amazon.com/dp/B0CQJZCC9T
Requires M4 T-Nuts (Tee Nuts) For wing clamp.
https://www.amazon.com/dp/B0CT2LFPYG
20mm Standoff cylinders.
https://www.amazon.com/dp/B08RX7TLQT
Thanks!
This is my first drone frame design - All feedback welcome!
It's 50 grams, costs a dollar fifty in material, which means you can smash it and make another at minimal cost, hence the name. BreakMe, give it a try.