Counting matching models…
Here you will find my designs for the XT30 size and MR30-M . News: 12.03.2025 STEP files available XT60 Male vertikal/ horizontal mount simple and slim design suitable for a wide range of applications To additionally secure the plug in…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Panel mount for XT60H-M connector. This variant was used on material that was ~ 0.625" / 15.875mm thick. Plug is a tight friction fit, installed from the back. The inner plate has just enough protruding to locate it in the hole and hold…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
Files for the XT30, XT60 and XT90 are now here…. EDIT: 8/10/22 Created the parts with raised letters. Mark them with a felt pen to make them easy to stand out. I got tired of fighting to keep the plug and wires in place while soldering…
There are two version: SpringyWalls (recommended) and regular ThickWalls. Make sure to turn on thin walls detection for the springy walls version. My settings Nozzle: 0.4mm Layer Height: 0.30mm Quality: Draft Supports: No Colored version…
Based on @Consti1606 work. Many have complained about having to scale up for his model, which is due to a very tight fit due to poor dimensional accuracy and lack of tolerances in some areas. The original model left permanant damage to my…
Here you find a few safety caps for the XT-battery-connectors. All of them are printed with TPU (Shore 95 or 90). You need a cable tie to attach it to the cable. Happy printing!
Eclosure for WX-2412 24V power supply board. It was designed with 3D printing mentality. No supports needed. CAD files included. Features: -The 40mm air intake fan -XT60 connector for DC output -IEC320 C14 socket for AC input -Easy…
It is intended to weatherproof a XT60 plug. Like for being used as a cars external charger connector or external power supply. It can be mounted directly to something rigid or also left hanging alone on the cable. If you want to mount it…
This is an adapter to power a device via 24V XT60 and/or USB from a Einhell Power X Change battery. I created it to power my TS100 soldering iron and a fume extractor (aka fan) from the Einhell batteries. Of course you can power any USB…
I was recently looking for a power supply cover and noticed that there was no covers that had both the right connector and a lot of XT60 ports. So I designed my own. It has plenty of ventilation, 6 XT60 female Connectors and is quite…
Needed a power source for my Pine64 Pinecil Soldering Iron, so decided to build an adapter to use the Makita batteries for this purpose. The required parts were purchased from Aliexpress: Makita 18V battery adapter XT-60 connectors XT-60…
for assembly you need: 1x mini digital voltmeter with 22.6x14mm screen. for example https://aliexpress.ru/item/4000131324446.html 1x xt60 male plug
Designed this cover for the LRS-350-12 power supply unit. It has four XT60 sockets and a C14 power socket, perfect for a 12V bench power supply. I also use another one to power my WLED room lights. Components needed: LRS-350-12/24/48…
If you like my designs please consider donating a coffee or any amount really, I really appreciate the gesture. https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
This is my first draft at making a standalone XT Lock, however it's based on a design I've been using built-in on a drone for 6 months without a single unplug, so I'm quite confident about the locking part. Requires an XT60-H connector…
XT60 Panel Mount with overlap to hide montage hole.
Parallel Board for ISDT Discharger with 6 XT60 Ports. To discharge multiple LiPo batteries at the same time when the weather or plans change. I got two ISDT dischargers to discharge multiple batches of batteries at once. Solder all…
A PSU cover/mounting system. Adds an IEC socket and three XT60 sockets
XT30 to XT60 connector for fpv. STL is 5mm high STEP for change to your desired height Print in tpu with good profile
XT60H Panel Mount Two options, flanged or not flanged Clamps are specific for each type. Mounting holes: CC for flange 37 mm CC for no flange 24.5 mm Hardware used: Socket head cap screw M3x10 or longer for the clamp. Screw length for…
Print the template with organics supports. PLA is good. First weld the two sockets with the template. The best is to use a rigid copper wire. Print the cover in TPU or VarioshoreTPU and glue it. You can have the XT60 to XT90 here :…
Description (EN) Compact screwable adapter designed specifically for the XT60H-M connector. This printed part is made to hold an XT60H-M connector and provides two mounting holes for fastening the adapter itself to a panel, plate, or…
I wanted to make a XT60 cap that was both very secure but not a total pain to put on and take off like most of the secured XT60 caps / covers that I have tried. This design will hold on to the connector very securely but easily comes off…
If you make this model and like it, please post your make and rate the model, that would make my day! I'm currently building a Lack enclosure and realised that any time I want to pull the printer out of the enclosure, for maintenance or…
TBS Source One v5 XT60 cable mount
Remix for XT60H connectors
Original text, with adjustments: Designed this cover for the LRS-350-24 power supply unit. It has one XT60E-F socket and a C14 power socket, perfect for a 24V bench power supply. LRS-350-12/24/48 Power Supply: Here 1x XT60E-F Female…
Couldn't find any XT60 female for case mount - so I built my own I used hard TPU for the mount and soft TPU for the cap.
Eclosure for DC2412 24V power supply board. It was designed with 3D printing mentality. No supports needed. For XT60H.
Thicker and angled version of https://www.thingiverse.com/thing:5516336
Przelotki mają pierścienie o średnicy 63.5mm Do drukowania potrzeba zastosować podpory w gniazdach XT60E-F Są dwie wersję.
I wanted to have an proper power connector in the bottom of the printer. So i modified a corner to fit an XT60 connector that can be glued in.
RD6012 Backcover with Slots and screw in XT60 male connector (amas). Use some screws to hang it onto a wall.
Tired of having a single cap for each battery state? Here's a 3-in-1 protective cap with indicators for charged, empty and storage. It's a bit of a tight squeeze, but it should fit a normal XT60 connector.
This remix allows the cap to be slid along the wire, away from the soldering point. This makes it possible to carefully solder the wires and then glue the cap in place. With the original design, this seems almost impossible to do.
Frame X Dji 04 Pro Air unit Dual Antenna Mount And XT60
Cover for XT60 batteries Printed using TPU, I recommend printing it one by one when printing in batches to avoid stringing between islands
Mount for GPS, ELRS Antennas, XT60, VTX Antennas This 3D-printed mount is designed to securely hold both a GPS module and an ELRS antenna directly on the housing of a video transmitter with an XT60 connector. It offers a compact,…
Power supply splitter XT60 x10 for Camera and DVR with voltage and current panelmeter ...
youll need the : PD65W Schnelllademodul Typ-C USB-Schnittstelle unterstützt PD3.1 QC3.0 SCP PPS Schnellladegerät 5V 9V 12V 20V - AliExpress 502 for normally 1,51 € 4x M3x8mm -two cable -2x spade connectors
This is a protective cover designed for the Mean Well LRS-100-5 power supply. It includes cutouts for an XT60 female panel connector and an IEC C14 (kettle-style) mains inlet, so the PSU can be integrated into a clean, enclosed setup with…
Power Strip / Power Distribution for XT60 connectors. Multiple models are available. Variations include: 2 through 6 Female XT60 Outputs with 1 XT60 Male Input. Optional Power Switch. Optional Mounting Tabs for all Variations. The model…
I designed this case to supply my RC charger. This USB C decoy can be configured to supply 5, 9, 12, 15, 20 and 28V. I created models showing these voltages as text. There are also models without text. So you can combine them as you like.…
A combined mount for a GPS (TBS M8-2 size), SMA connector and a XT60 plug. Designed for the TBS source one v3 frame, intended to be used with Crossfire antenna mounts underneath (25mm standoffs) Printed in Sainsmart TPU
This is a simple mount for securing the male end of an XT60 connection. Use a separate strap to hold the connection when fitting with the female end. The size will depend on your wire. Printed with PETG, 30% infill, no supports.
Used original model to remix @bOBERmASTER_410706 to use this PD board. https://www.aliexpress.com/item/1005008010712413.html Remixed both the case and the soldering template to use
Eliminate the risk of prop strike on the battery leads with this TPU Battery strap with built in XT30 or XT60 connector holder. I use it on the Proto25 drone. Note: This is a remix of a ProtoFPV STL - Not for commecial use / resale…
I've designed this socket for the housing of my 3d printer. Maybe it will be helpful with other aplications. Category: 3D Printer Parts
XT60H Panel Mount Two options, flanged or not flanged Clamps are specific for each type. Mounting holes: CC for flange 37 mm CC for no flange 24.5 mm Hardware used: Socket head cap screw M3x10 or longer for the clamp. Screw length for…
I was inspired by the adapter from this post https://www.thingiverse.com/thing:4560988 But my PD module did not fit in size and polarity, so I decided to make my own adapter. PD modules used are: ZYPDH and PDC004 I also used 3mm holes,…
XT60 cap to protect connector and easily distinguish batteries - charged/storage/discharged
This mount allows you to organize a XT60 battery plug, VTX single antenna, and GPS / buzzer / remote ID device. It will fit any FPV drone with a 25mm distance between the rear standoff posts and a frame separation of 25mm or greater.…
A PSU cover/mounting system. Adds an IEC socket and three XT60 sockets
Taking the opportunity of upgrading from i3 to MK3.5, i decided to rework the way i connect my PSU (which is relocated outside of my LACK enclosure). The new board has metal case, and thus must have the earthing line added, so my old…
Hey FPV Guys, it's a ugly quick'n'dirty combination of different Things. For the Speedybee Mario5 Frame: - WS Dual Antenna - XT60 Mountable Plug Connector - WS M181 GPS Print with TPU Infill 15% and Organic support
Backpack module for 5" FPV quadcopters. Please do verify the dimensions of your quadcopter: backpack is 20mm high. Check that your frame has at least this height. mounting points are separated by 24mm (measured center-to-center) mounting…
for assembly you need: 1x mini digital voltmeter with 22.6x14mm screen. for example https://aliexpress.ru/item/4000131324446.html 1x xt60 male plug
Based on @Consti1606 work. Many have complained about having to scale up for his model, which is due to a very tight fit due to poor dimensional accuracy and lack of tolerances in some areas. The original model left permanant damage to my…
I just needed a 10x3 for my XT60 covers so I used the parametric onshape file to make it.
You need to use a bracket to attach the XT60 to the TPU like this: https://www.lacameraembarquee.fr/cables-adaptateurs-connecteurs-fpv/14548-6370-support-aluminium-lemonfpv-pour-prise-xt60xt90.html#/1263-connecteur_batterie_fpv-xt60
https://www.amazon.de/Stück-Paar-Nylon-Hochstrom-Stecker/dp/B00IJCAN26/ref=sr\_1\_1?ie=UTF8&qid=1466438700&sr=8-1&keywords=xt60 Category: Electronics
Case for 2 Way SW3518 with XT60 no support needed 4 M2 bolts required Category: DIY
the printed version you see in these pictures is positive right you need two 2x8mm (or longer) and replace them with front canopy mount screws Heat gun recommended for first time xt60 socket push in
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture. https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
I noticed that the XT60 housing designs online mostly take 22-16AWG wires. I like to push my XT60s to their limit so this model is able to house to 12 AWG wires (4.5mm OD). The two parts are held together with an M3 screw and either a M3…
Przelotki mają pierścienie o średnicy 63.5mm Do drukowania potrzeba zastosować podpory w gniazdach XT60E-F Są dwie wersję.
Smart solution to manage my XT60 connector in my MST CFX-WS. Two ways to mount it, glue it on every chassis or screw it only on MST CFX-WS
After I build the type e-Lab based on a DSP5005 I wanted to power it with 36V to also cover higher outputs though more devices. Since I've haven't found a case for the 36V version I created my own. It uses a IEC320 mains inlet and XT60E-M…
Simple housing with additional strain relief for XT60H connectors - one version for both male and female. You can solder two separate wires up to 12AWG (outer diameter of cables - 4.5mm MAX) or one “2-core cable”. Make sure to dry-fit the…
Mount for XT60 socket and VTX antenna in your FPV drone GEPRC Category: R/C Vehicles
Simple friction-fit cap for XT60 connectors. I print in PETG with a 0.6mm nozzle. If you're using TPU you might want to scale it down to 0.95–0.98 to get a little extra snug on the fit. Has a slight taper on the end to make it easier to…
A cover for a modified (voltage upped to 13.5 V) HP server power supply for use as a ham-radio psu. It should fit other similar HP models (Dimensions H38.5mm x W86.5mm). The support part is being used to keep the psu level. There is a…
Adjusted dimensions to better find my generic XT60 plugs. Category: R/C Vehicles
This design allows an ordinary male XT60 connector to be mounted behind a panel. Uses through-bolts for mounting to mitigate layer-adhesion strength concerns. The body can be scaled in Z in a slicer to account for differing panel…
The xt60 connector mounted with small zipties, the antenna hole is 6.5mm for a 6.3mm screw. The centre to centre post distance is 30mm with a diameter of 5mm.
a handle for better grip on your XT60 plugs / jacks; some glue needed print in PETG, lots of perimeters for 100 % infill, no supports Update longer version added; FreeCAD project file upgraded to FreeCAD 1.1
a handle for better grip on your XT60 plugs / jacks; some glue needed print in PETG, lots of perimeters for 100 % infill, no supports Update longer version added; FreeCAD project file upgraded to FreeCAD 1.1
The truck comes with a Deans connector clamping bracket, I prefer XT60 ... Category: R/C Vehicles
Printed with E3 with ABS filament, make a threads with M3 Threading tools on plastic for lock screw. 12 M3x20 low profile screw 2 M3 nuts.
SASTE XT60 Travel Cap Sastekwads.be is a Belgian webshop specialized in drones and related products and services. For more information about their offering and services, visit their website: Sastekwads.be.
Storage for 8 x 3 XT60 TPU or other material caps. With loop for keychain or strap. Recommended to to print in tpu for easier removal from original author, all credits go to @MichaTrybus_523068
This is a remix from the Functional Print Friday's Youtube channel of a cordless battery adapter for a Pinecil soldering iron. pretty snug fit to the battery, print laying down (xt60 side up) fits stand from :…
Rekon 7 HD pro Buzzer and XT60 mounts for that https://youtu.be/TbkZb6YF4V8
I wanted to have an proper power connector in the bottom of the printer. So i modified a corner to fit an XT60 connector that can be glued in.
Bigger PSU-Cover for the black Delta-PSU from the Prusa i3 MK3S+ I added cutouts for one XT60BE-F Connector.
No supports, brim or raft. 0.2 mm layer height. The best result is expected if TPU/ elastan filament used. Support creator here: PayPal me :) Patreon
After purchasing XT60 connectors, i discovered they weren't compatible with the original design. So i remixed it to work with my connectors. BOM 3 - XT60E-F Panel Mount (like this one https://www.aliexpress.com/item/1005003727958427.html…
Geprc / Phisital mark5 XT60 mount. Holes diameters 3.1 mm, holes spacing 24.5 mm. You can use glue to stick the connector. Printed in PLA.
This "backpack" is an addon for the TBS Source One V5 FPV Frame to hold both the VTX and the ELRS Antenna and also provide a mounting point for the XT60 connector. The XT60 Connector has to be screwed in. The ELRS antenna is holded in…
